-
Je něco špatně v tomto záznamu ?
Simulation guided design of the MRcollar: a MR compatible applicator for deep heating in the head and neck region
T. Drizdal, K. Sumser, GG. Bellizzi, O. Fiser, J. Vrba, GCV. Rhoon, DTB. Yeo, . Margarethus M Paulides
Jazyk angličtina Země Velká Británie
Typ dokumentu časopisecké články, práce podpořená grantem
NLK
Directory of Open Access Journals
od 2019
Taylor & Francis Open Access
od 2018-05-03
Taylor & Francis Open Access
od 2019-01-01
Medline Complete (EBSCOhost)
od 1999-01-01
ROAD: Directory of Open Access Scholarly Resources
od 1985
- MeSH
- hlava diagnostické zobrazování MeSH
- indukovaná hypertermie * MeSH
- krk diagnostické zobrazování MeSH
- lidé MeSH
- magnetická rezonanční spektroskopie MeSH
- magnetická rezonanční tomografie MeSH
- vytápění * MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
PURPOSE: To develop a head and neck hyperthermia phased array system compatible with a 1.5 T magnetic resonance (MR) scanner for noninvasive thermometry. METHODS: We designed a dielectric-parabolic-reflector antenna (DiPRA) based on a printed reflector backed dipole antenna and studied its predicted and measured performance in a flat configuration (30 mm thick water bolus and muscle equivalent layer). Thereafter, we designed a phased array applicator model ('MRcollar') consisting of 12 DiPRA modules placed on a radius of 180 mm. Theoretical heating performance of the MRcollar model was benchmarked against the current clinical applicator (HYPERcollar3D) using specific (3D) head and neck models of 28 treated patients. Lastly, we assessed the influence of the DiPRA modules on MR scanning quality. RESULTS: The predicted and measured reflection coefficients (S11) of the DiPRA module are below -20 dB. The maximum specific absorption rate (SAR) in the area under the antenna was 47% higher than for the antenna without encasing. Compared to the HYPERcollar3D, the MRcollar design incorporates 31% less demineralized water (-2.5 L), improves the predicted TC25 (target volume enclosed by 25% iso-SAR contour) by 4.1% and TC50 by 8.5%, while the target-to-hotspot quotient (THQ) is minimally affected (-1.6%). MR experiments showed that the DiPRA modules do not affect MR transmit/receive performance. CONCLUSION: Our results suggest that head and neck hyperthermia delivery quality with the MRcollar can be maintained, while facilitating simultaneous noninvasive MR thermometry for treatment monitoring and control.
Department of Electrical Engineering Eindhoven University of Technology Eindhoven The Netherlands
Hyperthermia Unit Department of Radiotherapy Erasmus MC Cancer Institute Rotterdam The Netherlands
Imaging and Bioelectronic Technologies GE Global Research Centre Niskayuna NY USA
Citace poskytuje Crossref.org
- 000
- 00000naa a2200000 a 4500
- 001
- bmc21026250
- 003
- CZ-PrNML
- 005
- 20211026133057.0
- 007
- ta
- 008
- 211013s2021 xxk f 000 0|eng||
- 009
- AR
- 024 7_
- $a 10.1080/02656736.2021.1892836 $2 doi
- 035 __
- $a (PubMed)33682594
- 040 __
- $a ABA008 $b cze $d ABA008 $e AACR2
- 041 0_
- $a eng
- 044 __
- $a xxk
- 100 1_
- $a Drizdal, Tomas $u Hyperthermia Unit, Department of Radiotherapy, Erasmus MC Cancer Institute, Rotterdam, The Netherlands $u Department of Biomedical Technology, Faculty of Biomedical Engineering, Czech Technical University in Prague, Kladno, Czech Republic, Kladno, Czech Republic in Prague
- 245 10
- $a Simulation guided design of the MRcollar: a MR compatible applicator for deep heating in the head and neck region / $c T. Drizdal, K. Sumser, GG. Bellizzi, O. Fiser, J. Vrba, GCV. Rhoon, DTB. Yeo, . Margarethus M Paulides
- 520 9_
- $a PURPOSE: To develop a head and neck hyperthermia phased array system compatible with a 1.5 T magnetic resonance (MR) scanner for noninvasive thermometry. METHODS: We designed a dielectric-parabolic-reflector antenna (DiPRA) based on a printed reflector backed dipole antenna and studied its predicted and measured performance in a flat configuration (30 mm thick water bolus and muscle equivalent layer). Thereafter, we designed a phased array applicator model ('MRcollar') consisting of 12 DiPRA modules placed on a radius of 180 mm. Theoretical heating performance of the MRcollar model was benchmarked against the current clinical applicator (HYPERcollar3D) using specific (3D) head and neck models of 28 treated patients. Lastly, we assessed the influence of the DiPRA modules on MR scanning quality. RESULTS: The predicted and measured reflection coefficients (S11) of the DiPRA module are below -20 dB. The maximum specific absorption rate (SAR) in the area under the antenna was 47% higher than for the antenna without encasing. Compared to the HYPERcollar3D, the MRcollar design incorporates 31% less demineralized water (-2.5 L), improves the predicted TC25 (target volume enclosed by 25% iso-SAR contour) by 4.1% and TC50 by 8.5%, while the target-to-hotspot quotient (THQ) is minimally affected (-1.6%). MR experiments showed that the DiPRA modules do not affect MR transmit/receive performance. CONCLUSION: Our results suggest that head and neck hyperthermia delivery quality with the MRcollar can be maintained, while facilitating simultaneous noninvasive MR thermometry for treatment monitoring and control.
- 650 _2
- $a hlava $x diagnostické zobrazování $7 D006257
- 650 12
- $a vytápění $7 D006361
- 650 _2
- $a lidé $7 D006801
- 650 12
- $a indukovaná hypertermie $7 D006979
- 650 _2
- $a magnetická rezonanční tomografie $7 D008279
- 650 _2
- $a magnetická rezonanční spektroskopie $7 D009682
- 650 _2
- $a krk $x diagnostické zobrazování $7 D009333
- 655 _2
- $a časopisecké články $7 D016428
- 655 _2
- $a práce podpořená grantem $7 D013485
- 700 1_
- $a Sumser, Kemal $u Hyperthermia Unit, Department of Radiotherapy, Erasmus MC Cancer Institute, Rotterdam, The Netherlands
- 700 1_
- $a Bellizzi, Gennaro G $u Hyperthermia Unit, Department of Radiotherapy, Erasmus MC Cancer Institute, Rotterdam, The Netherlands $u Department of Information Engineering, Infrastructures and Sustainable Energy, Universita Mediterranea di Reggio Calabria, Reggio di Calabria, Italy
- 700 1_
- $a Fiser, Ondrej $u Department of Biomedical Technology, Faculty of Biomedical Engineering, Czech Technical University in Prague, Kladno, Czech Republic, Kladno, Czech Republic in Prague
- 700 1_
- $a Vrba, Jan $u Department of Biomedical Technology, Faculty of Biomedical Engineering, Czech Technical University in Prague, Kladno, Czech Republic, Kladno, Czech Republic in Prague
- 700 1_
- $a Rhoon, Gerard C van $u Hyperthermia Unit, Department of Radiotherapy, Erasmus MC Cancer Institute, Rotterdam, The Netherlands
- 700 1_
- $a Yeo, Desmond T B $u Imaging and Bioelectronic Technologies, GE Global Research Centre, Niskayuna, NY, USA
- 700 1_
- $a Margarethus M Paulides, $u Hyperthermia Unit, Department of Radiotherapy, Erasmus MC Cancer Institute, Rotterdam, The Netherlands $u Department of Electrical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands
- 773 0_
- $w MED00002331 $t International journal of hyperthermia $x 1464-5157 $g Roč. 38, č. 1 (2021), s. 382-392
- 856 41
- $u https://pubmed.ncbi.nlm.nih.gov/33682594 $y Pubmed
- 910 __
- $a ABA008 $b sig $c sign $y p $z 0
- 990 __
- $a 20211013 $b ABA008
- 991 __
- $a 20211026133103 $b ABA008
- 999 __
- $a ok $b bmc $g 1715076 $s 1146757
- BAS __
- $a 3
- BAS __
- $a PreBMC
- BMC __
- $a 2021 $b 38 $c 1 $d 382-392 $e - $i 1464-5157 $m International journal of hyperthermia $n Int J Hyperthermia $x MED00002331
- LZP __
- $a Pubmed-20211013