Low molecular weight poly(lactic acid) microparticles for controlled release of the herbicide metazachlor: preparation, morphology, and release kinetics
Language English Country United States Media print-electronic
Document type Evaluation Study, Journal Article, Research Support, Non-U.S. Gov't
    PubMed
          
           22480233
           
          
          
    DOI
          
           10.1021/jf300521j
           
          
          
  
    Knihovny.cz E-resources
    
  
              
      
- MeSH
- Acetamides chemistry MeSH
- Herbicides chemistry MeSH
- Kinetics MeSH
- Lactic Acid chemistry MeSH
- Delayed-Action Preparations chemistry MeSH
- Molecular Weight MeSH
- Polyesters MeSH
- Polymers chemistry MeSH
- Drug Compounding methods MeSH
- Particle Size MeSH
- Publication type
- Journal Article MeSH
- Evaluation Study MeSH
- Research Support, Non-U.S. Gov't MeSH
- Names of Substances
- Acetamides MeSH
- Herbicides MeSH
- Lactic Acid MeSH
- Delayed-Action Preparations MeSH
- metazachlor MeSH Browser
- poly(lactide) MeSH Browser
- Polyesters MeSH
- Polymers MeSH
The preemergence chloroacetamide herbicide metazachlor was encapsulated in biodegradable low molecular weight poly(lactic acid) micro- and submicroparticles, and its release to the water environment was investigated. Three series of particles, S, M, and L, varying in their size (from 0.6 to 8 μm) and with various initial amounts of the active agent (5%, 10%, 20%, 30% w/w) were prepared by the oil-in-water solvent evaporation technique with gelatin as biodegradable surfactant. The encapsulation efficiencies reached were about 60% and appeared to be lower for smaller particles. Generally, it was found that the rate of herbicide release decreased with increasing size of particles. After 30 days the portions of the herbicide released for its highest loading (30% w/w) were 92%, 56%, and 34% for about 0.6, 0.8, and 8 μm particles, respectively. The release rates were also lower for lower herbicide loadings. Metazachlor release from larger particles tended to be a diffusion-controlled process, while for smaller particles the kinetics was strongly influenced by an initial burst release.
References provided by Crossref.org
