The porous polymer foams act as a template for neotissuegenesis in tissue engineering, and, as a reservoir for cell transplants such as pancreatic islets while simultaneously providing a functional interface with the host body. The fabrication of foams with the controlled shape, size and pore structure is of prime importance in various bioengineering applications. To this end, here we demonstrate a thermally induced phase separation (TIPS) based facile process for the fabrication of polymer foams with a controlled architecture. The setup comprises of a metallic template bar (T), a metallic conducting block (C) and a non-metallic reservoir tube (R), connected in sequence T-C-R. The process hereinafter termed as Dip TIPS, involves the dipping of the T-bar into a polymer solution, followed by filling of the R-tube with a freezing mixture to induce the phase separation of a polymer solution in the immediate vicinity of T-bar; Subsequent free-drying or freeze-extraction steps produced the polymer foams. An easy exchange of the T-bar of a spherical or rectangular shape allowed the fabrication of tubular, open- capsular and flat-sheet shaped foams. A mere change in the quenching time produced the foams with a thickness ranging from hundreds of microns to several millimeters. And, the pore size was conveniently controlled by varying either the polymer concentration or the quenching temperature. Subsequent in vivo studies in brown Norway rats for 4-weeks demonstrated the guided cell infiltration and homogenous cell distribution through the polymer matrix, without any fibrous capsule and necrotic core. In conclusion, the results show the "Dip TIPS" as a facile and adaptable process for the fabrication of anisotropic channeled porous polymer foams of various shapes and sizes for potential applications in tissue engineering, cell transplantation and other related fields.

Department of Biomaterials and Bioanalogous Polymer Systems Institute of Macromolecular Chemistry Academy of Sciences of the Czech Republic v v i Prague Czech Republic

Department of Polymer Processing Institute of Macromolecular Chemistry Academy of Sciences of the Czech Republic v v i Prague Czech Republic

Laboratory of Islets of Langerhans Institute for Clinical and Experimental Medicine Prague Czech Republic

Zobrazit více v PubMed

Shastri VP, Martin I, Langer R (2000) Macroporous polymer foams by hydrocarbon templating. Proc Natl Acad Sci USA 97: 1970–1975. PubMed PMC

Berthiaume F, Maguire TJ, Yarmush ML (2011) Tissue Engineering and Regenerative Medicine: History, Progress, and Challenges. Annu Rev Chem Biomol Eng 2: 403–430. PubMed

Liu C, Xia Z, Czernuszka JT (2007) Design and development of three-dimensional scaffolds for tissue engineering. Chem Eng Res Des 85: 1051–1064.

Xiao L, Wang B, Yang G, Gauthier M (2012) Poly(Lactic Acid)-Based Biomaterials: Synthesis, Modification and Applications. Biomedical Science, Engineering and Technology, Prof. Dhanjoo N. Ghista (Ed.), ISBN: 978-953-307-471-9, InTech, DOI: 10.5772/23927.

Kasoju N, Bora U (2012) Silk Fibroin in Tissue Engineering. Adv Healthcare Mater 1: 393–412. PubMed

Sakiyama-Elbert SE, Hubbell JA (2001) Functional biomaterials: design of novel biomaterials. Ann Rev Mater Res 31: 183–201.

Matsumura G, Nitta N, Matsuda S, Sakamoto Y, Isayama N, et al. (2012) Long-term results of cell-free biodegradable scaffolds for in situ tissue-engineering vasculature: in a canine inferior vena cava model. PLoS One 7: e35760. PubMed PMC

Masaeli E, Morshed M, Nasr-Esfahani MH, Sadri S, Hilderink J, et al. (2013) Fabrication, characterization and cellular compatibility of poly(hydroxy alkanoate) composite nanofibrous scaffolds for nerve tissue engineering. PLoS One 8: e57157. PubMed PMC

Gugerell A, Kober J, Laube Y, Walter T, Nürnberger S, et al. (2014) Electrospun Poly(ester-Urethane)- and Poly(ester-Urethane-Urea) Fleeces as Promising Tissue Engineering Scaffolds for Adipose-Derived Stem Cells. PLoS One 9: e90676. PubMed PMC

Wang H-M, Chou Y-T, Wen Z-H, Wang Z-R, Chen C-H, et al. (2013) Novel Biodegradable Porous Scaffold Applied to Skin Regeneration. PLoS One 8: e56330. PubMed PMC

Kriz J, Vilk G, Mazzuca DM, Toleikis PM, Foster PJ, et al. (2012) A novel technique for the transplantation of pancreatic islets within a vascularized device into the greater omentum to achieve insulin independence. Am J Surg 203: 793–797. PubMed

Mitchell GR, Tojeira A (2013) Role of Anisotropy in Tissue Engineering. Procedia Eng 59: 117–125.

Vrana NE, Dupret A, Coraux C, Vautier D, Debry C, et al. (2011) Hybrid Titanium/Biodegradable Polymer Implants with an Hierarchical Pore Structure as a Means to Control Selective Cell Movement. PLoS ONE 6: e20480. PubMed PMC

Ma PX, Zhang R (2001) Microtubular architecture of biodegradable polymer scaffolds. J Biomed Mater Res 56: 469–477. PubMed

Kennedy JP, McCandless SP, Rauf A, Williams LM, Hillam J, et al. (2011) Engineered channels enhance cellular density in perfused scaffolds. Acta Biomater 7: 3896–3904. PubMed

Patel H, Bonde M, Srinivasan G (2011) Biodegradable polymer scaffold for tissue engineering. Trends Biomater Artif Organs 25: 20–29.

Chan BP, Leong KW (2008) Scaffolding in tissue engineering: general approaches and tissue-specific considerations. Eur Spine J 17 Suppl 4: 467–479. PubMed PMC

Kasoju N, Bora U (2010) Antheraea assama Silk Fibroin-Based Functional Scaffold with Enhanced Blood Compatibility for Tissue Engineering Applications. Adv Eng Mater 12: B139–B147.

Chen G, Ushida T, Tateishi T (2002) Scaffold Design for Tissue Engineering. Macromol Biosci 2: 67–77.

Kasoju N, Bora U (2012) Silk fibroin based biomimetic artificial extracellular matrix for hepatic tissue engineering applications. Biomed Mater 7: 045004. PubMed

Martŕnez-Pérez CA, Olivas-Armendariz I, Castro-Carmona JS, Garcŕa-Casillas PE (2011) Scaffolds for Tissue Engineering Via Thermally Induced Phase Separation. In: Wislet-Gendebien S, editor. Advances in Regenerative Medicine: InTech. pp.275–294.

Kim JW, Taki K, Nagamine S, Ohshima M (2009) Preparation of porous poly(L-lactic acid) honeycomb monolith structure by phase separation and unidirectional freezing. Langmuir 25: 5304–5312. PubMed

Moriya A, Maruyama T, Ohmukai Y, Sotani T, Matsuyama H (2009) Preparation of poly(lactic acid) hollow fiber membranes via phase separation methods. J Membr Sci 342: 307–312.

Ma H, Hu J, Ma PX (2010) Polymer Scaffolds for Small-Diameter Vascular Tissue Engineering. Adv Funct Mater 20: 2833–2841. PubMed PMC

Yang F, Qu X, Cui W, Bei J, Yu F, et al. (2006) Manufacturing and morphology structure of polylactide-type microtubules orientation-structured scaffolds. Biomaterials 27: 4923–4933. PubMed

Hu X, Shen H, Yang F, Bei J, Wang S (2008) Preparation and cell affinity of microtubular orientation-structured PLGA(70/30) blood vessel scaffold. Biomaterials 29: 3128–3136. PubMed

Kubies D, Rypacek F, Kovarova J, Lednicky F (2000) Microdomain structure in polylactide-block-poly(ethylene oxide) copolymer films. Biomaterials 21: 529–536. PubMed

Kotek J, Kubies D, Baldrian J, Kovarova J (2011) Biodegradable polyester nanocomposites: The effect of structure on mechanical and degradation behavior. Eur Polym J 47: 2197–2207.

Rigby SP, Barwick D, Fletcher RS, Riley SN (2003) Interpreting mercury porosimetry data for catalyst supports using semi-empirical alternatives to the Washburn equation. Appl Catal A 238: 303–318.

Zhai W, Ko Y, Zhu W, Wong A, Park CB (2009) A study of the crystallization, melting, and foaming behaviors of polylactic acid in compressed CO(2). Int J Mol Sci 10: 5381–5397. PubMed PMC

Fernandez J, Etxeberria A, Sarasua JR (2012) Synthesis, structure and properties of poly(L-lactide-co-epsilon-caprolactone) statistical copolymers. J Mech Behav Biomed Mater 9: 100–112. PubMed

Goh YQ, Ooi CP (2008) Fabrication and characterization of porous poly(L-lactide) scaffolds using solid-liquid phase separation. J Mater Sci Mater Med 19: 2445–2452. PubMed

Guarino V, Guaccio A, Guarnieri D, Netti PA, Ambrosio L (2012) Binary system thermodynamics to control pore architecture of PCL scaffold via temperature-driven phase separation process. J Biomater Appl 27: 241–254. PubMed

Bhardwaj R, Mohanty AK (2007) Modification of brittle polylactide by novel hyperbranched polymer-based nanostructures. Biomacromolecules 8: 2476–2484. PubMed

Chen JS, Tu SL, Tsay RY (2010) A morphological study of porous polylactide scaffolds prepared by thermally induced phase separation. J Taiwan Inst Chem Eng 41: 229–238.

Hua FJ, Park TG, Lee DS (2003) A facile preparation of highly interconnected macroporous poly(D,L-lactic acid-co-glycolic acid) (PLGA) scaffolds by liquid-liquid phase separation of a PLGA-dioxane-water ternary system. Polymer 44: 1911–1920.

Beysens D, Jayalakshmi Y (1995) Kinetics of phase separation under a concentration gradient. Physica A 213: 71–89. PubMed

Lacasta AM, Sancho JM, Yeung C (1994) Phase Separation Dynamics in a Concentration Gradient. Eur Phy Lett 27: 291.

Yang MC, Perng JS (1998) Effect of quenching temperature on the morphology and separation properties of polypropylene microporous tubular membranes via thermally induced phase separation. J Polym Res 5: 213–219.

Kim J-W, Taki K, Nagamine S, Ohshima M (2008) Preparation of poly(L-lactic acid) honeycomb monolith structure by unidirectional freezing and freeze-drying. Chem Eng Sci 63: 3858–3863. PubMed

Zhu J, Chen L, Shen J (2001) Morphological evolution during phase separation and coarsening with strong inhomogeneous elasticity Model Simul Mater Sci Eng. 9: 499.

Pang YY, Dong X, Zhao Y, Han CC, Wang DJ (2011) Phase Separation Induced Morphology Evolution and Corresponding Impact Fracture Behavior of iPP/PEOc Blends. J Appl Polym Sci 121: 445–453.

Wang H, Composto RJ (2000) Understanding morphology evolution and roughening in phase-separating thin-film polymer blends. Europhys Lett 50: 622–627.

Ravari F, Mashak A, Nekoomanesh M, Mobedi H (2013) Non-isothermal cold crystallization behavior and kinetics of poly(l-lactide): effect of l-lactide dimer. Polym Bull 70: 2569–2586.

Nam YS, Park TG (1999) Biodegradable polymeric microcellular foams by modified thermally induced phase separation method. Biomaterials 20: 1783–1790. PubMed

Xiao L, Wang B, Yang G, Gauthier M (2012) Poly(Lactic Acid)-Based Biomaterials: Synthesis, Modification and Applications, Biomedical Science, Engineering and Technology, Dhanjoo N. Ghista (Ed.),. ISBN: 978-953-307-471-9, InTech, DOI: 10.5772/23927.

Silva MMCG, Cyster LA, Barry JJA, Yang XB, Oreffo ROC, et al. (2006) The effect of anisotropic architecture on cell and tissue infiltration into tissue engineering scaffolds. Biomaterials 27: 5909–5917. PubMed

Jana S, Cooper A, Zhang M (2013) Chitosan scaffolds with unidirectional microtubular pores for large skeletal myotube generation. Adv Healthcare Mater 2: 557–561. PubMed

Sun C, Jin X, Holzwarth JM, Liu X, Hu J, et al. (2012) Development of channeled nanofibrous scaffolds for oriented tissue engineering. Macromol Biosci 12: 761–769. PubMed PMC

Thirumaleshwar M (2009) Heat Transfer from Extended Surfaces FINS. In: Fundamentals of Heat and Mass Transfer. Pearson Education India. pp. 221–265.

Nagarani N, Mayilsamy K, Murugesan A, Kumar GS (2014) Review of utilization of extended surfaces in heat transfer problems. Renew Sust Energ Rev 29: 604–613.