MEMS (micro-electro-mechanical system)-based inertial sensors, i.e., accelerometers and angular rate sensors, are commonly used as a cost-effective solution for the purposes of navigation in a broad spectrum of terrestrial and aerospace applications. These tri-axial inertial sensors form an inertial measurement unit (IMU), which is a core unit of navigation systems. Even if MEMS sensors have an advantage in their size, cost, weight and power consumption, they suffer from bias instability, noisy output and insufficient resolution. Furthermore, the sensor's behavior can be significantly affected by strong vibration when it operates in harsh environments. All of these constitute conditions require treatment through data processing. As long as the navigation solution is primarily based on using only inertial data, this paper proposes a novel concept in adaptive data pre-processing by using a variable bandwidth filtering. This approach utilizes sinusoidal estimation to continuously adapt the filtering bandwidth of the accelerometer's data in order to reduce the effects of vibration and sensor noise before attitude estimation is processed. Low frequency vibration generally limits the conditions under which the accelerometers can be used to aid the attitude estimation process, which is primarily based on angular rate data and, thus, decreases its accuracy. In contrast, the proposed pre-processing technique enables using accelerometers as an aiding source by effective data smoothing, even when they are affected by low frequency vibration. Verification of the proposed concept is performed on simulation and real-flight data obtained on an ultra-light aircraft. The results of both types of experiments confirm the suitability of the concept for inertial data pre-processing.

Department of Measurement Faculty of Electrical Engineering Czech Technical University Prague Technicka 2 Prague 16627 Czech Republic

Zobrazit více v PubMed

Gebre-Egziabher D., Hayward R.C., Powell J.D. A low-cost GPS/inertial attitude heading reference system (AHRS) for general aviation applications. Proceedings of the IEEE 1998 Position Location and Navigation Symposium; Palm Springs, CA, USA. 20–23 April 1998.

Savage P.G. Strapdown inertial navigation integration algorithm design part 1: Attitude algorithms. J. Guid. Control Dyn. 1998;21:19–28.

Savage P.G. Strapdown inertial navigation integration algorithm design part 2: Velocity and position algorithms. J. Guid. Control Dyn. 1998;21:208–221.

Sipos M., Paces P., Reinstein M., Rohac J. Flight attitude track reconstruction using two AHRS units under laboratory conditions. Proceedings of the 2009 IEEE Sensors; Christchurch, New Zealand. 25–28 October 2009.

Euston M., Coote P., Mahony R., Jonghyuk K. A complementary filter for attitude estimation of a fixed-wing UAV. Proceedings of the International Conference on Intelligent Robots and Systems; Nice, France. 22–26 September 2008.

Bristeau P.-J., Petit N. Navigation System for Ground Vehicles using Temporally; Proceedings of the American Control Conference; O'Farrell Street, San Francisco, CA, USA. 29 June–1 July 2011.

Reinstein M., Kubelka V. Complementary filtering approach to orientation estimation using inertial sensors only. Proceedings of the IEEE International Conference on Robotics and Automation (ICRA); Prague, Czech Republic. 14–18 May 2012.

Farrell J. Aided Navigation: GPS with High Rate Sensors. McGraw Hill Education; New York, NY, USA: 2008.

Simanek J., Reinstein M., Kubelka V. Evaluation of the EKF-Based Estimation Architectures for Data Fusion in Mobile Robots. IEEE-Asme T. Mech. 2014;20:985–990.

Moorhouse D.J., Woodcock R.J. Background Information and User Guide for MIL-F-8785C, Military Specification-Flying Qualities of Piloted Airplanes. Air Force Wright Aeronautical Labs Wright-Patterson Air Force Base; Dayton, OH, USA: 1982.

Pratt R.W. Flight Control Systems: Practical Issues in Design and Implementation. The Institute of Electrical Engineers; Stevenage, UK: 2000. pp. 119–167.

Harris F. Fixed length FIR filters with continuously variable bandwidth. Proceedings of the 1st International Conference on Wireless Communication, Vehicular Technology, Information Theory and Aerospace & Electronic Systems Technology; Aalborg, Denmark. 17–20 May 2009.

Harris F., Lowdermilk W. Implementation Considerations and Performance Comparison of Variable Bandwidth FIR Filter and Phase Equalized IIR Filter. Proceedings of the Conference Record of the Forty-First Asilomar Conference on Signals, Systems and Computers; Pacific Grove, CA, USA. 4–7 November 2007.

IEEE Standard for Digitizing Waveform Recorders, 1994. [(accessed on 30 January 2015)]. pp. 1–74. Available online: http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=469117.

IEEE Standard for Terminology and Test. Methods for Analog-To-Digital Converters, 2001. [(accessed on 30 January 2015)]. pp. 1–92. Available online: http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=929859.

Kay S.M. Fundamentals of statistical signal processing. Volume 2 Prentice Hall; Upper Saddle River, NJ, USA: 1998. Detection Theory.

Rohac J., Reinstein M., Draxler K. Data processing of inertial sensors in strong-vibration environment. Proceedings of the 2011 IEEE 6th International Conference on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS); Prague, Czech Republic. 15–17 September 2011.

Rohac J., Daado S. Impact of Environmental Vibration on Inertial Sensor's Output. Sens. Transducers J. 2013;24:19–27.

Fugal D.L. Conceptual Wavelets In Digital Signal Processing. Space & Signals Technologies LLC; Berlin Germany: 2009.

Rajmic P., Vlach J., Vyoral J. Real-time wavelet transform with overlap of signal segments. Proceedings of the International Conference on Signals and Electronic Systems; Krakow, Poland. 14–17 September 2008.

Weeks M. Digital Signal Processing Using MATLAB & Wavelets. Jones & Bartlett Learning; Sudbury, MA , USA: 2010.

Wojtaszczyk P. A Mathematical Introduction to Wavelets. Cambridge University Press; Cambridge, UK: 1997.