This research deals with the development of knitted hollow composites from recycled cotton fibers (RCF) and glass fibers (GF). These knitted hollow composites can be used for packaging of heavy weight products and components in aircrafts, marine crafts, automobiles, civil infrastructure, etc. They can also be used in medical prosthesis or in sports equipment. Glass fiber-based hollow composites can be used as an alternative to steel or wooden construction materials for interior applications. Developed composite samples were subjected to hardness, compression, flexural, and impact testing. Recycled cotton fiber, which is a waste material from industrial processes, was chosen as an ecofriendly alternative to cardboard-based packaging material. The desired mechanical performance of knitted hollow composites was achieved by changing the tube diameter and/or thickness. Glass fiber-reinforced knitted hollow composites were compared with RC fiber composites. They exhibited substantially higher compression strength as compared to cotton fiber-reinforced composites based on the fiber tensile strength. However, RC fiber-reinforced hollow composites showed higher compression modulus as compared to glass fiber-based composites due to much lower deformation during compression loading. Compression strength of both RCF- and GF-reinforced hollow composites decreases with increasing tube diameter. The RCF-based hollow composites were further compared with double-layered cardboard packaging material of similar thickness. It was observed that cotton-fiber-reinforced composites show higher compression strength, as well as compression modulus, as compared to the cardboard material of similar thickness. No brittle failure was observed during the flexural test, and samples with smaller tube diameter exhibited higher stiffness. The flexural properties of glass fiber-reinforced composites were compared with RCF composites. It was observed that GF composites exhibit superior flexural properties as compared to the cotton fiber-based samples. Flexural strength of RC fiber-reinforced hollow composites was also compared to that of cardboard packaging material. The composites from recycled cotton fibers showed substantially higher flexural stiffness as compared to double-layered cardboard material. Impact energy absorption was measured for GF and RCF composites, as well as cardboard material. All GF-reinforced composites exhibited higher absorption of impact energy as compared to RCF-based samples. Significant increase in absorption of impact energy was achieved by the specimens with higher tube thickness in the case of both types of reinforcing fibers. By comparing the impact performance of cotton fiber-based composites with cardboard packaging material, it was observed that the RC fiber-based hollow composites absorb much higher impact energy as compared to the cardboard-based packaging material. The current paper summarizes a comparative analysis of mechanical performance in the case of glass fiber-reinforced hollow composites vis-à-vis recycled cotton fiber-reinforced hollow composites. The use of recycled fibers is a positive step in the direction of ecofriendly materials and waste utilization. Their performance is compared with commercial packaging material for a possible replacement and reducing burden on the environment.

Department of Material Science and Manufacturing Technology Faculty of Engineering Czech University of Life Sciences Prague Kamycka 129 6 Suchdol 165 00 Prague Czech Republic

Faculty of Textile Engineering National Textile University Faisalabad 37610 Pakistan

Textile Engineering Department NED University of Engineering and Technology Karachi 75270 Pakistan

Zobrazit více v PubMed

Ramakrishna H., Priya S., Rai S. Effect of fly ash content on impact, compression, and water absorption properties of epoxy toughened with epoxy phenol cashew nutshell liquid-fly ash composites. J. Reinf. Plast. Compos. 2006;25:455–462. doi: 10.1177/0731684406056431. DOI

Jamshaid H., Mishra R., Pechociakova M., Noman M.T. Mechanical, thermal and interfacial properties of green composites from basalt and hybrid woven fabrics. Fibers Polym. 2016;17:1675–1686. doi: 10.1007/s12221-016-6563-z. DOI

Sargianis J., Kim H., Andres E., Suhr J. Sound and vibration damping characteristics in natural material based sandwich composites. Compos. Struct. 2013;96:538–544. doi: 10.1016/j.compstruct.2012.09.006. DOI

Mohanty A., Misra M., Drzal L. Natural Fibers, Biopolymers and Biocomposites. CRC Press; Boca Raton, FL, USA: 2005.

Joserph P., Joseph K., Thomas S. Effect of processing variables on the mechanical properties of sisal-fiber-reinforced polypropylene composites. Compos. Sci. Technol. 1999;59:1625–1640. doi: 10.1016/S0266-3538(99)00024-X. DOI

Sakthivel S., Kumar S., Melese B., Mekonnen S., Solomon E., Edae A., Abedom F., Gedilu M. Development of nonwoven composites from recycled cotton/polyester apparel waste materials for sound absorbing and insulating properties. Appl. Acoust. 2021;180:108126. doi: 10.1016/j.apacoust.2021.108126. DOI

Mishra R., Behera B.K. Recycling of textile waste into green composites: Performance characterization. Polym. Compos. 2014;35:1960–1967. doi: 10.1002/pc.22855. DOI

Sezgin H., Kucukali-Ozturk M., Berkalp O.B., Yalcin-Enis I. Design of composite insulation panels containing 100% recycled cotton fibers and polyethylene/polypropylene packaging wastes. J. Clean. Prod. 2021;304:127132. doi: 10.1016/j.jclepro.2021.127132. DOI

Mishra R., Huang J., Kale B., Zhu G., Wang Y. The production, characterization and applications of nanoparticles in the textile industry. Text. Prog. 2014;46:133–226. doi: 10.1080/00405167.2014.964474. DOI

Li H., Li Z., Liu L. Flax/PP weft-knitted thermoplastic composites and its tensile properties. J. Reinf. Plast. Compos. 2010;29:1820–1825. doi: 10.1177/0731684409335402. DOI

Hoffmann G., Diestel O., Cherif O. Thermoplastic composite from innovative flat knitted 3D multi-layer spacer fabric using hybrid yarn and the study of 2D mechanical properties. Compos. Sci. Technol. 2010;70:363–370. doi: 10.1016/j.compscitech.2009.11.008. DOI

Harte A., Fleck N. Deformation and failure mechanisms of braided composite tubes in compression and torsion. Acta Mater. 2000;48:1259–1271. doi: 10.1016/S1359-6454(99)00427-9. DOI

Mishra R., Gupta N., Pachauri R., Behera B.K. Modelling and simulation of earthquake resistant 3D woven textile structural concrete composites. Compos. Part B Eng. 2015;81:91–97. doi: 10.1016/j.compositesb.2015.07.008. DOI

Beard S., Chang F. Energy absorption of braided composite tubes. Int. J. Crashworthiness. 2002;7:191–206. doi: 10.1533/cras.2002.0214. DOI

Ziegmann G., Dickert M., Cristaldi G. Properties and performances of various hybrid glass/natural fiber composites for curved pipes. Mater. Des. 2009;30:2538–2542. doi: 10.1016/j.matdes.2008.09.044. DOI

Wu X., Zhang Q., Zhang W. Axial compression deformation and damage of four-step 3-D circular braided composite tubes under various strain rates. J. Text. Inst. 2016;107:1584–1600. doi: 10.1080/00405000.2015.1130298. DOI

Hu D., Luo M., Yang J. Experimental study on crushing characteristics of brittle fiber/epoxy hybrid composite tubes. Int. J. Crashworthiness. 2010;15:401–412. doi: 10.1080/13588261003647402. DOI

Ahmed M., Hoa S. Flexural stiffness of thick-walled composite tubes. Compos. Struct. 2016;149:125–133. doi: 10.1016/j.compstruct.2016.03.050. DOI

Yan A., Jospin R., Nguyen D. An enhanced pipe elbow element application in plastic limit analysis of pipe structures. Int. J. Numer. Meth. Eng. 1999;46:409–431. doi: 10.1002/(SICI)1097-0207(19990930)46:3<409::AID-NME682>3.0.CO;2-N. DOI

Bathe K., Almeida C. A simple and effective pipe elbow element-linear analysis. J. Appl. Mech. 1980;47:93–100. doi: 10.1115/1.3153645. DOI

Qi X., Jiang S. Design and analysis of a filament wound composite tube under general loadings with assistance of computer; Proceedings of the 2nd International Conference on Education Technology and Computer (ICETC); Shanghai, China. 22–24 June 2010.

Xu D., Derisi B., Hoa S. Stress distributions of thermoplastic composite tubes subjected to four-point loading; Proceedings of the 1st Joint Canadian-American International Conference; Delaware, DE, USA. 15–17 September 2009.

[(accessed on 19 July 2021)]; Available online: https://www.shimaseiki.com/product/design/virtual_sampling/

Almeida J., Jr., Ribeiro M.L., Tita V., Amico S.C. Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression. Compos. Struct. 2017;160:204–210. doi: 10.1016/j.compstruct.2016.10.036. DOI

Mishra R., Behera B.K., Mukherjee S., Petru M., Muller M. Axial and radial compression behavior of composite rocket launcher developed by robotized filament winding: Simulation and experimental validation. Polymers. 2021;13:517. doi: 10.3390/polym13040517. PubMed DOI PMC

Hassan T., Jamshaid H., Mishra R., Khan M.Q., Petru M., Novak J., Choteborsky R., Hromasova M. Acoustic, mechanical and thermal properties of green composites reinforced with natural fibers waste. Polymers. 2020;12:654. doi: 10.3390/polym12030654. PubMed DOI PMC

Sarr M.M., Inoue H., Kosaka T. Study on the improvement of interfacial strength between glass fiber and matrix resin by grafting cellulose nanofibers. Compos. Sci. Technol. 2021;211:108853. doi: 10.1016/j.compscitech.2021.108853. DOI

Halpin A.J.C., Kardos J.L. The halpin-tsai equations: A review. Polym. Eng. Sci. 1976;16:344–352.

Liu Q., Xu X., Ma J. Lateral crushing and bending responses of CFRP square tube filled with aluminum honeycomb. Compos. Part B Eng. 2017;118:104–115. doi: 10.1016/j.compositesb.2017.03.021. DOI

Hamidon M., Sultan M., Ariffin A. Failure Analysis in Biocomposites, Fiber-Reinforced Composites and Hybrid Composites. Elsevier; Amsterdam, The Netherlands: 2019. Investigation of Mechanical Testing on Hybrid Composite Materials; pp. 133–156.

Lu Z., Jing X., Sun B., Gu B. Compressive behaviors of warp-knitted spacer fabrics impregnated with shear thickening fluid. Compos. Sci. Technol. 2013;88:184–189. doi: 10.1016/j.compscitech.2013.09.004. DOI

Asayesh A., Amini M. The effect of fabric structure on the compression behavior of weft-knitted spacer fabrics for cushioning applications. J. Text. Inst. 2020:1–12. doi: 10.1080/00405000.2020.1829330. Online First. DOI

Liu Y., Hu H., Zhao L., Long H. Compression behavior of warp-knitted spacer fabrics for cushioning applications. Text. Res. J. 2012;82:11–20. doi: 10.1177/0040517511416283. DOI

Arumugam V., Mishra R., Tunak M. In-plane shear behavior of 3D knitted spacer fabrics. J. Ind. Text. 2016;46:868–886. doi: 10.1177/1528083715601509. DOI

Arumugam V., Mishra R., Tunak M. In plane shear behavior of 3D warp-knitted spacer fabrics: Part-II: Effect of structural parameters. J. Ind. Text. 2018;48:772–801. doi: 10.1177/1528083717747332. DOI

Arumugam V., Mishra R., Salacova J. Investigation on thermo-physiological and compression characteristics of weft knitted 3D spacer fabrics. J. Text. Inst. 2017;108:1095–1105. doi: 10.1080/00405000.2016.1220035. DOI

Ahmed M.M., Dhakal H.N., Zhang Z.Y., Barouni A., Zahari R. Enhancement of impact toughness and damage behaviour of natural fibre reinforced composites and their hybrids through novel improvement techniques: A critical review. Compos. Struct. 2021;259:113496. doi: 10.1016/j.compstruct.2020.113496. DOI

Li F.S., Gao Y.B., Jiang W. Design of high impact thermal plastic polymer composites with balanced toughness and rigidity: Toughening with one phase modifier. Polymer. 2019;170:101–106. doi: 10.1016/j.polymer.2019.03.004. DOI

Liu W., Zhang J.Q., Hong M., Li P., Xue Y.H., Chen Q., Ji X.L. Chain microstructure of two highly impact polypropylene resins with good balance between stiffness and toughness. Polymer. 2020;188:122146. doi: 10.1016/j.polymer.2019.122146. DOI

Han S., Zhang T., Guo Y., Li C., Wu H., Guo S. Brittle-ductile transition behavior of the polypropylene/ultra-high molecular weight polyethylene/olefin block copolymers ternary blends: Dispersion and interface design. Polymer. 2019;182:121819. doi: 10.1016/j.polymer.2019.121819. DOI

Hajjari M., Nedoushan R.J., Dastan T., Sheikhzadeh M., Yu W.R. Lightweight weft-knitted tubular lattice composite for energy absorption applications: An experimental and numerical study. Int. J. Solid Struct. 2021;213:77–92. doi: 10.1016/j.ijsolstr.2020.12.017. DOI

Khondker O.A., Leong K.H., Herszberg I., Hamada H. Impact and compression-after-impact performance of weft-knitted glass textile composites. Compos. Part A Appl. Sci. Manuf. 2005;36:638–648. doi: 10.1016/j.compositesa.2004.07.006. DOI

Advances in Textile Structural Composites