The combination of two dissimilar materials has always been a serious problem in dentistry. In order to meet this challenge, it is necessary to combine both chemical methods (treatment with silanes, (meth)acrylic functional monomers) and the development of the surface of the joined material in a physical way, e.g., by sandblasting with alumina, alumina with silica, acid etching, the use of lasers and other means. The purpose of this literature review is to present all methods of joining dental composites with other materials such as ceramics, metal, another composite material. This review covers articles published within the period 2012-2022 in journals indexed in the PubMed database, written in English and describing joining different dental materials to each other. All the critical steps of new joint preparation have been addressed, including proper cleaning of the joint surface, the application of appropriate primers capable of forming a chemical bond between ceramics, zirconium oxide or metals and alloys, and finally, the application of new composite materials.

Centre for Advanced Technologies Adam Mickiewicz University in Poznan Uniwersytetu Poznańskiego 10 61 614 Poznan Poland

Faculty of Chemistry Adam Mickiewicz University in Poznan Uniwersytetu Poznańskiego 8 61 614 Poznan Poland

Faculty of Mechanical Engineering Bialystok University of Technology Wiejska 45 C 15 351 Bialystok Poland

R and D SpofaDental Markova 238 506 01 Jicin Czech Republic

Zobrazit více v PubMed

Zarone F., Di Mauro M.I., Ausiello P., Ruggiero G., Sorrentino R. Current status on lithium disilicate and zirconia: A narrative review. BMC Oral Health. 2019;19:134. doi: 10.1186/s12903-019-0838-x. PubMed DOI PMC

Hazem A.S. Dental Composite Properties Evaluation: From Experimental Approaches to the Prerequisite of a Chewing Bench, Human Health and Pathology. Université de Lyon; Lyon, France: 2017.

Iftikhar S., Jahanzeb N., Saleem M., Ur R.S., Matinlinna J.P., Khan A.S. The trends of dental biomaterials research and future directions: A mapping review. Saudi Dent. J. 2021;33:229–238. doi: 10.1016/j.sdentj.2021.01.002. PubMed DOI PMC

John K.R.S. Biocompatibility of Dental Materials. Dent. Clin. N. Am. 2007;51:747–760. doi: 10.1016/j.cden.2007.03.003. PubMed DOI

Zhou Z.R., Zheng J. Tribology of dental materials: A review. J. Phys. D Appl. Phys. 2008;41:113001. doi: 10.1088/0022-3727/41/11/113001. DOI

Vaderhobli R.M. Advances in Dental Materials. Dent. Clin. N. Am. 2011;55:619–625. doi: 10.1016/j.cden.2011.02.015. PubMed DOI

Rezaie H.R., Rizi H.B., Khamseh M.M.R., Öchsner A. A Review on Dental Materials. Springer; Cham, Switzerland: 2020.

Condò R., Mampieri G., Cioffi A., Cataldi M.E., Frustaci I., Giancotti A., Campanella V., Mussi V., Convertino A., Maiolo L., et al. Physical and chemical mechanisms involved in adhesion of orthodontic bonding composites: In vitro evaluations. BMC Oral Health. 2021;16:350. doi: 10.1186/s12903-021-01715-9. PubMed DOI PMC

Yan Y., Zhang H., Yang J., Chen C. Evaluating the Bonding Performance of a Novel Dual-curing Composite Cement to Zirconia. J. Adhes. Dent. 2021;23:569–578. doi: 10.3290/j.jad.b2288181. PubMed DOI

Deprá M.B., De Almeida J.X., da Cunha Tde M., Lon L.F., Retamoso L.B., Tanaka O.M. Effect of saliva contamination on bond strength with a hydrophilic composite resin. Dent. Press J. Orthod. 2013;18:63–68. doi: 10.1590/S2176-94512013000100015. PubMed DOI

Piest C., Wille S., Strunskus T., Polonskyi O., Kern M. Efficacy of Plasma Treatment for Decontaminating Zirconia. J. Adhes. Dent. 2018;20:289–297. doi: 10.3290/j.jad.a40986. PubMed DOI

Güers P., Wille S., Strunskus T., Polonskyi O., Kern M. Durability of resin bonding to zirconia ceramic after contamination and the use of various cleaning methods. Dent. Mater. 2019;35:1388–1396. doi: 10.1016/j.dental.2019.07.027. PubMed DOI

Uno M., Kawaki H., Ishigami H., Yokogawa Y., Doi Y. Effects of silica sputtering on adhesion between zirconia and composite resin cores. Dent. Mater. J. 2021;40:1014–1019. doi: 10.4012/dmj.2020-363. PubMed DOI

Hammad S.M., El Banna M.S. Effects of cyclic loading on the shear bond strength of metal orthodontic brackets bonded to resin composite veneer surface using different conditioning protocols. Prog. Orthod. 2013;14:14. doi: 10.1186/2196-1042-14-14. PubMed DOI PMC

Alovisi M., Scotti N., Comba A., Manzon E., Farina E., Pasqualini D., Michelotto Tempesta R., Breschi L., Cadenaro M. Influence of polymerization time on properties of dual-curing cements in combination with high translucency monolithic zirconia. J. Prosthodont. Res. 2018;62:468–472. doi: 10.1016/j.jpor.2018.06.003. PubMed DOI

Sabatini C., Patel M., D’Silva E. In vitro shear bond strength of three self-adhesive resin cements and a resin-modified glass ionomer cement to various prosthodontic substrates. Oper. Dent. 2013;38:186–196. doi: 10.2341/11-317-L. PubMed DOI

Ona M., Wakabayashi N., Yamazaki T., Takaichi A., Igarashi Y. The influence of elastic modulus mismatch between tooth and post and core restorations on root fracture. Int. Endod. J. 2013;46:47–52. doi: 10.1111/j.1365-2591.2012.02092.x. PubMed DOI

Costa A.R., Vedovello-Filho M., Correr A.B., Vedovello S.A., Puppin-Rontani R.M., Ogliari F.A., Moraes R.R., Correr-Sobrinho L. Bonding orthodontics brackets to enamel using experimental composites with an iodonium salt. Eur. J. Orthod. 2014;36:297–302. doi: 10.1093/ejo/cjt051. PubMed DOI

Magne P., Malta D.A., Enciso R., Monteiro-Junior S. Heat Treatment Influences Monomer Conversion and Bond Strength of Indirect Composite Resin Restorations. J. Adhes. Dent. 2015;17:559–566. doi: 10.3290/j.jad.a35258. PubMed DOI

Carrilho E., Cardoso M., Ferreira M.M., Marto C.M., Paula A., Coelho A.S. 10-MDP Based Dental Adhesives: Adhesive Interface Characterization and Adhesive Stability—A Systematic Review. Materials. 2019;12:790. doi: 10.3390/ma12050790. PubMed DOI PMC

Wang R., Shi Y., Li T., Pan Y., Cui Y., Xia W. Adhesive interfacial characteristics and the related bonding performance of four self-etching adhesives with different functional monomers applied to dentin. J. Dent. 2017;62:72–80. doi: 10.1016/j.jdent.2017.05.010. PubMed DOI

Eliades A., Birpou E., Eliades T., Eliades G. Self-adhesive restoratives as pit and fissure sealants: A comparative laboratory study. Dent. Mater. 2013;29:752–762. doi: 10.1016/j.dental.2013.04.005. PubMed DOI

Papadogiannis D., Dimitriadi M., Zafiropoulou M. Universal Adhesives: Setting Characteristics and Reactivity with Dentin. Materials. 2019;12:1720. doi: 10.3390/ma12101720. PubMed DOI PMC

Rahul M., Kumar P.A., Nair A.S., Mathew S., Amaladas A.S., Ommen A. Effects of at-home and in-office bleaching agents on the shear bond strength of metal, ceramic, and composite brackets to enamel. Indian J. Dent Res. 2017;28:566–573. PubMed

Fatemeh K., Mohammad Javad M., Samaneh K. The effect of silver nanoparticles on composite shear bond strength to dentin with different adhesion protocols. J. Appl. Oral Sci. 2017;25:367–373. doi: 10.1590/1678-7757-2016-0391. PubMed DOI PMC

Melo M.A., Cheng L., Zhang K., Weir M.D., Rodrigues L.K., Xu H.H. Novel dental adhesives containing nanoparticles of silver and amorphous calcium phosphate. Dent. Mater. 2013;29:199–210. doi: 10.1016/j.dental.2012.10.005. PubMed DOI PMC

Behnaz M., Dalaie K., Mirmohammadsadeghi H., Salehi H., Rakhshan V., Aslani F. Shear bond strength and adhesive remnant index of orthodontic brackets bonded to enamel using adhesive systems mixed with TiO2 nanoparticles. Dent. Press J. Orthod. 2018;23:43.e1–43.e7. doi: 10.1590/2177-6709.23.4.43.e1-7.onl. PubMed DOI PMC

Kotta M., Gorantla S., Muddada V., Lenka R.R., Karri T., Kumar S., Tivanani M. Antibacterial activity and debonding force of different lingual retainers bonded with conventional composite and nanoparticle containing composite: An in vitro study. J. World Fed. Orthod. 2020;9:80–85. doi: 10.1016/j.ejwf.2020.03.001. PubMed DOI

Abbatepaulo G.L., Gangana T.M.M.C., Martinez E.F., Turssi C.P., França F.M.G., Amaral F.L.B., Basting R.T. TiF4 Incorporated into a Self-etching Primer in Different Concentrations: Antimicrobial Properties and Effects on Demineralisation Inhibition Around the Restoration/Enamel-Dentin Interface. Oral Health Prev. Dent. 2019;17:57–67. doi: 10.3290/j.ohpd.a41978. PubMed DOI

Jowkar Z., Farpour N., Koohpeima F., Mokhtari M.J., Shafiei F. Effect of Silver Nanoparticles, Zinc Oxide Nanoparticles and Titanium Dioxide Nanoparticles on Microshear Bond Strength to Enamel and Dentin. J. Contemp. Dent. Pract. 2018;19:1404–1411. PubMed

Rubin Cocco A., de Oliveira da Rosa W.L., Luque Peralta S., Timm Maske T., da Silva A.F., Andrade Hartwig C., Foster Mesko M., Piva E., Guerra Lund R. New adhesive system based in metals cross-linking methacrylate. J. Mech. Behav. Biomed. Mater. 2018;77:519–526. doi: 10.1016/j.jmbbm.2017.10.010. PubMed DOI

Li R., Wang C., Ma S.Q., Liu Z.H., Zang C.C., Zhang W.Y., Sun Y.C. High bonding strength between zirconia and composite resin based on combined surface treatment for dental restorations. J. Appl. Biomater. Funct. Mater. 2020;18:8655. doi: 10.1177/2280800020928655. PubMed DOI

Mehari K., Parke A.S., Gallardo F.F., Vandewalle K.S. Assessing the Effects of Air Abrasion with Aluminum Oxide or Glass Beads to Zirconia on the Bond Strength of Cement. J. Contemp. Dent. Pract. 2020;21:713–717. PubMed

Tanış M.C., Akay C., Şen M. Effect of selective infiltration etching on the bond strength between zirconia and resin luting agents. J. Esthet. Restor. Dent. 2019;31:257–262. doi: 10.1111/jerd.12441. PubMed DOI

Al-Akhali M., Al-Dobaei E., Wille S., Mourshed B., Kern M. Influence of elapsed time between airborne-particle abrasion and bonding to zirconia bond strength. Dent. Mater. 2021;37:516–522. doi: 10.1016/j.dental.2020.12.010. PubMed DOI

Shimoe S., Peng T., Otaku M., Tsumura N., Satoda S.I.T. Influence of various airborne-particle abrasion conditions on bonding between zirconia ceramics and an indirect composite resin material. J. Prosthet. Dent. 2019;122:491.e1–491.e9. doi: 10.1016/j.prosdent.2019.08.016. PubMed DOI

Grasel R., Santos M.J., Hm Rêgo H.C.h., Rippe M.P., Valandro L.F. Effect of Resin Luting Systems and Alumina Particle Air Abrasion on Bond Strength to Zirconia. Oper. Dent. 2018;43:282–290. doi: 10.2341/15-352-L. PubMed DOI

Altan B., Cinar S., Tuncelli B. Evaluation of shear bond strength of zirconia-based monolithic CAD-CAM materials to resin cement after different surface treatments. Niger. J. Clin. Pract. 2019;22:1475–1482. doi: 10.4103/njcp.njcp_157_19. PubMed DOI

Ruales-Carrera E., Cesar P.F., Henriques B., Fredel M.C., Özcan M., Volpato C.A.M. Adhesion behavior of conventional and high-translucent zirconia: Effect of surface conditioning methods and aging using an experimental methodology. J. Esthet. Restor. Dent. 2019;31:388–397. doi: 10.1111/jerd.12490. PubMed DOI

Chen B., Yan Y., Xie H., Meng H., Zhang H., Chen C.H. Effects of Tribochemical Silica Coating and Alumina-Particle Air Abrasion on 3Y-TZP and 5Y-TZP: Evaluation of Surface Hardness, Roughness, Bonding, and Phase Transformation. J. Adhes. Dent. 2020;22:373–382. doi: 10.3290/j.jad.a44868. PubMed DOI

Iwasaki T., Komine F., Fushiki R., Kubochi K., Shinohara M., Matsumura H. Shear bond strengths of an indirect composite layering material to a tribochemically silica-coated zirconia framework material. Dent. Mater. J. 2016;35:461–469. doi: 10.4012/dmj.2015-311. PubMed DOI

Otani A.S., Amaral M., May L.G., Cesar P.F., Valandro L.F. A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP. Dent Mater. 2015;31:648–656. doi: 10.1016/j.dental.2015.03.002. PubMed DOI

Cadore-Rodrigues A.C., Prochnow C., Burgo T.A.L., Oliveira J.S., Jahn S.L., Foletto E.L., Rippe M.P., Pereira G.K.R., Valandro L.F. Stable Resin Bonding to Y-TZP Ceramic with Air Abrasion by Alumina Particles Containing 7% Silica. J. Adhes. Dent. 2020;22:149–159. doi: 10.3290/j.jad.a44151. PubMed DOI

Libecki W., Elsayed A., Lehmann F., Kern M. Efficacy of Different Surface Treatments for Intraoral Repair of Veneered Zirconia Frameworks. J. Adhes. Dent. 2017;19:323–329. doi: 10.3290/j.jad.a38891. PubMed DOI

Aboushelib M.N., Ragab H., Arnaot M. Ultrastructural Analysis and Long-term Evaluation of Composite-Zirconia Bond Strength. J. Adhes. Dent. 2018;20:33–39. doi: 10.3290/j.jad.a39962. PubMed DOI

Fushiki R., Komine F., Blatz M.B., Koizuka M., Taguchi K., Matsumura H. Shear bond strength between an indirect composite layering material and feldspathic porcelain-coated zirconia ceramics. Clin. Oral Investig. 2012;16:1401–1411. doi: 10.1007/s00784-011-0641-9. PubMed DOI

Noro A., Kameyama A., Haruyama A., Takahashi T. Influence of hydrophilic pre-treatment on resin bonding to zirconia ceramics. Bull. Tokyo Dent. Coll. 2015;56:33–39. doi: 10.2209/tdcpublication.56.33. PubMed DOI

Egoshi T., Taira Y., Sakihara M., Kamada K., Sawase T., Murata H. Effects of air abrasion and glow-discharge plasma treatment on bonding resin cement to ceria-stabilized zirconia/alumina nanocomposite. Dent. Mater. J. 2019;38:437–443. doi: 10.4012/dmj.2018-029. PubMed DOI

Lümkemann N., Eichberger M., Stawarczyk B. Different surface modifications combined with universal adhesives: The impact on the bonding properties of zirconia to composite resin cement. Clin. Oral Investig. 2019;23:3941–3950. doi: 10.1007/s00784-019-02825-z. PubMed DOI

Elias A.B., Simão R.A., Prado M., Cesar P.F., Botelho Dos Santos G., Moreira da Silva E. Effect of different times of nonthermal argon plasma treatment on the microtensile bond strength of self-adhesive resin cement to yttria-stabilized tetragonal zirconia polycrystal ceramic. J. Prosthet. Dent. 2019;121:485–491. doi: 10.1016/j.prosdent.2018.03.025. PubMed DOI

Barquete C.G., Simão R.A., Almeida Fonseca S.S., Elias A.B., Antunes Guimarães J.G., Herrera E.Z., Mello A., Moreira da Silva E. Effect of cementation delay on bonding of self-adhesive resin cement to yttria-stabilized tetragonal zirconia polycrystal ceramic treated with nonthermal argon plasma. J. Prosthet. Dent. 2021;125:693.e1–693.e7. doi: 10.1016/j.prosdent.2020.11.032. PubMed DOI

Piascik J.R., Swift E.J., Braswell K., Stoner B.R. Surface fluorination of zirconia: Adhesive bond strength comparison to commercial primers. Dent. Mater. 2012;28:604–608. doi: 10.1016/j.dental.2012.01.008. PubMed DOI

Su Z., Li M., Zhang L., Wang C., Zhang L., Xu J., Fu B. A novel porous silica-zirconia coating for improving bond performance of dental zirconia. J. Zhejiang Univ. Sci. B. 2021;22:214–222. doi: 10.1631/jzus.B2000448. PubMed DOI PMC

Kim G.H., Park S.W., Lee K., Oh G.J., Lim H.P. Shear bond strength between resin cement and colored zirconia made with metal chlorides. J. Prosthet. Dent. 2015;113:603–608. doi: 10.1016/j.prosdent.2014.12.013. PubMed DOI

Chen Y., Lu Z., Qian M., Zhang H., Xie H., Chen C. Effect of 10-Methacryloxydecyl Dihydrogen Phosphate Concentration on Chemical Coupling of Methacrylate Resin to Yttria-stabilized Zirconia. J. Adhes. Dent. 2017;19:349–355. doi: 10.3290/j.jad.a38893. PubMed DOI

Ye S., Lin J.C., Kang L.L., Li C.L., Hou S.S., Lee T.L., Chuang S.F. Investigations of silane-MDP interaction in universal adhesives: A ToF-SIMS analysis. Dent. Mater. 2022;38:183–193. doi: 10.1016/j.dental.2021.12.002. PubMed DOI

Zarif N.H., Mousavi M., Nouri N., Torkan S. Evaluation of the effect of different surface conditioning methods on shear bond strength of metal brackets bonded to aged composite restorations. Int. Orthod. 2019;17:80–88. doi: 10.1016/j.ortho.2019.01.009. PubMed DOI

Espinar-Escalona E., Barrera-Mora J.M., Llamas-Carreras J.M., Solano-Reina E., Rodríguez D., Gil F.J. Improvement in adhesion of the brackets to the tooth by sandblasting treatment. J. Mater. Sci. Mater. Med. 2012;23:605–611. doi: 10.1007/s10856-011-4509-y. PubMed DOI

Sobouti F., Dadgar S., Sanikhaatam Z., Nateghian N., Saravi M.G. Effects of two erbium-doped yttrium aluminum garnet lasers and conventional treatments as composite surface abrasives on the shear bond strength of metal brackets bonded to composite resins. J. Orthodont. Sci. 2016;5:18–24. PubMed PMC

Shaymaa E.E. Influence of surface treatments on bond strength of metal and ceramic brackets to a novel CAD/CAM hybrid ceramic material. Odontology. 2016;104:68–76. doi: 10.1007/s10266-014-0188-8. PubMed DOI

Park H., Cho J.H., Jung J.H., Duy P.P. A Review of Wet Chemical Etching of Glasses in Hydrofluoric Acid based Solution for Thin Film Silicon Solar Cell Application. Curr. Photovolt. Res. 2017;5:75–82. doi: 10.21218/CPR.2017.5.3.075. DOI

Pompeo D.D., Rosário H.D., Lopes B.M., Cesar P.F., Paranhos L.R. Can 10% hydrofluoric acid be used for reconditioning of orthodontic brackets? Indian J. Dent. Res. 2016;27:383–387. doi: 10.4103/0970-9290.191886. PubMed DOI

Komine F., Kubochi K., Kimura F., Kusaba K., Takano R., Matsumura H. Shear bond strength between gingival composite resin and glazed gingival porcelain for implant-supported prostheses. Eur. J. Oral. Sci. 2021;129:e12762. doi: 10.1111/eos.12762. PubMed DOI

Leyva Del Rio D., Sandoval-Sanchez E., Campos-Villegas N.E., Azpiazu-Flores F.X., Zavala-Alonso N.V. Influence of Heated Hydrofluoric Acid Surface Treatment on Surface Roughness and Bond Strength to Feldspathic Ceramics and Lithium-Disilicate Glass-Ceramics. J. Adhes. Dent. 2021;23:549–555. doi: 10.3290/j.jad.b2288275. PubMed DOI

Koko M., Takagaki T., Abdou A., Inokoshi M., Ikeda M., Wada T., Uo M., Nikaido T., Tagami J. Effects of the ratio of silane to 10-methacryloyloxydecyl dihydrogenphosphate (MDP) in primer on bonding performance of silica-based and zirconia ceramics. J. Mech. Behav. Biomed. Mater. 2020;112:104026. doi: 10.1016/j.jmbbm.2020.104026. PubMed DOI

Patil S.S., Kontham U.R., Kamath A., Kontham R. Shear bond strength of composite resin bonded to preformed metal crowns for primary molars using a universal adhesive and two different surface treatments: An in vitro study. Eur. Arch. Paediatr. Dent. 2016;17:377–380. doi: 10.1007/s40368-016-0240-1. PubMed DOI

Madani A.S., Astaneh P.A., Nakhaei M., Bagheri H.G., Moosavi H., Alavi S., Najjaran N.T. Effectiveness of silica-lasing method on the bond strength of composite resin repair to Ni-Cr alloy. J. Prosthodont. 2015;24:225–232. doi: 10.1111/jopr.12200. PubMed DOI

Kamada K., Taira Y., Sumi T., Sawase T. Retention strength between veneering resin composites and laser-sintered cobalt-chromium alloy. Odontology. 2017;105:23–28. doi: 10.1007/s10266-016-0257-2. PubMed DOI

Kawashima S., Nagai Y., Shinkai K. Effect of silane coupling treatment and airborne-particle abrasion on shear bond strength between photo-cured bulk-fill flowable composite resin and silverpalladium-copper-gold alloy using self-adhesive resin cement. Dent. Mater. J. 2019;38:418–423. doi: 10.4012/dmj.2018-121. PubMed DOI

Hattan M.A., Pani S.C., Alomari M. Composite bonding to stainless steel crowns using a new universal bonding and single-bottle systems. Int. J. Dent. 2013;2013:607405. doi: 10.1155/2013/607405. PubMed DOI PMC

Almilhatti H.J., Neppelenbroek K.H., Vergani C.E., Machado A.L., Pavarina A.C., Giampaolo E.T. Adhesive bonding of resin composite to various titanium surfaces using different metal conditioners and a surface modification system. J. Appl. Oral. Sci. 2013;21:590–596. doi: 10.1590/1679-775720130255. PubMed DOI PMC

Taira Y., Egoshi T., Kamada K., Sawase T. Surface modification with alumina blasting and H2SO4-HCl etching for bonding two resin-composite veneers to titanium. Eur. J. Oral. Sci. 2014;122:84–88. doi: 10.1111/eos.12109. PubMed DOI

Lung C.Y., Liu D., Matinlinna J.P. Surface treatment of titanium by a polydimethylsiloxane coating on bond strength of resin to titanium. J. Mech. Behav. Biomed. Mater. 2015;41:168–176. doi: 10.1016/j.jmbbm.2014.10.001. PubMed DOI

Nakamura K., Kawaguchi T., Ikeda H., Karntiang P., Kakura K., Taniguchi Y., Toyoda K., Shimizu H., Kido H. Bond durability and surface states of titanium, Ti-6Al-4V alloy, and zirconia for implant materials. J. Prosthodont. Res. 2022;66:296–302. doi: 10.2186/jpr.JPR_D_20_00297. PubMed DOI

Sung H.G., Ko K.H., Park C.J., Cho L.R., Huh Y.H. Composite Cement Components Stabilize the Bond between a Lithium-Disilicate Glass-Ceramic and the Titanium Abutment. J. Adhes. Dent. 2021;23:469–475. doi: 10.3290/j.jad.b2000265. PubMed DOI

Oweis Y., Alageel O., Kozak P., Abdallah M.N., Retrouvey J.M., Cerruti M., Tamimi F. Metal-composite adhesion based on diazonium chemistry. Dent. Mater. 2017;33:e393–e404. doi: 10.1016/j.dental.2017.07.017. PubMed DOI

Baeza-Robleto S.J., Villa-Negrete D.M., García-Contreras R., Scougall-Vílchis R.J., Guadarrama-Quiroz L.J., Robles-Bermeo N.L. Effects of ultraviolet irradiation on the bond strength of a composite resin adhered to stainless steel crowns. Pediatr. Dent. 2013;35:23–26. PubMed

Kiatsirirote K., Northeast S.E., van Noort R. Bonding procedures for intraoral repair of exposed metal with resin composite. J. Adhes. Dent. 2012;4:315–321. PubMed

Lee Y., Kim K.H., Kim Y.K., Son J.S., Lee E., Kwon T.Y. The Effect of Novel Mercapto Silane Systems on Resin Bond Strength to Dental Noble Metal Alloys. J. Nanosci. Nanotechnol. 2015;15:4851–4854. doi: 10.1166/jnn.2015.10402. PubMed DOI

Pilo R., Brosh T., Geron V., Levartovsky S., Eliades G. Effect of Silane Reaction Time on the Repair of a Nanofilled Composite Using Tribochemical Treatment. J. Adhes. Dent. 2016;18:125–134. doi: 10.3290/j.jad.a35907. PubMed DOI

Lung C.Y., Kukk E., Matinlinna J.P. Shear bond strength between resin and zirconia with two different silane blends. Acta Odontol. Scand. 2012;70:405–413. doi: 10.3109/00016357.2011.630014. PubMed DOI

Zhou J., Wurihan Shibata Y., Tanaka R., Zhang Z., Zheng K., Li Q., Ikeda S., Gao P., Miyazaki T. Quantitative/qualitative analysis of adhesive-dentin interface in the presence of 10-methacryloyloxydecyl dihydrogen phosphate. J. Mech. Behav. Biomed. Mater. 2019;92:71–78. doi: 10.1016/j.jmbbm.2018.12.038. PubMed DOI

Komura I., Yamauchi J., Nagase Y., Uemura F. Production of Phosphoric Monoester. JPS59139392A. 1984 August 10;

Llerena-Icochea A.E., Costa R.M., Borges A., Bombonatti J., Furuse A.Y. Bonding Polycrystalline Zirconia With 10-MDP-containing Adhesives. Oper. Dent. 2017;42:335–341. doi: 10.2341/16-156-L. PubMed DOI

Tsuchimoto Y., Yoshida Y., Mine A., Nakamura M., Nishiyama N., Van Meerbeek B., Suzuki K., Kuboki T. Effect of 4-MET- and 10-MDP-based primers on resin bonding to titanium. Dent. Mater. J. 2016;25:120–124. doi: 10.4012/dmj.25.120. PubMed DOI