PURPOSE: Discrepancy between the morphology of the acetabular margin and the design of hemispheric acetabular cups used in total hip arthroplasty may produce postoperative hip pain due to an iliopsoas impingement at the iliopsoas notch. This study aimed to determine the anatomical features of the iliopsoas notch in the Central European sample, and to test whether the morphology of the proximal femur affects the size of the iliopsoas notch. METHODS: The sample was composed of 40 matched pairs of dry hip bones and corresponding femora. The depth and length of the iliopsoas notch were measured and correlated with the available demographic data. The anthropometric parameters of the proximal femur were calculated using image-analysis software, and their association with the measurements of the iliopsoas notch was tested. RESULTS: The iliopsoas notch was present in all specimens and featured four morphological configurations: curved (61.3%), angular (16.2%), irregular (16.2%), and straight (6.3%). Its size was found to be larger in males (P = 0.014 for depth, P < 0.001 for length). No significant difference existed between the sides. The height and age of the specimens did not correlate with the size of the iliopsoas notch. Furthermore, neither the femoral neck version, the lesser trochanteric version, nor the angle between the neck of the femur and the lesser trochanter influenced the dimensions of the iliopsoas notch. CONCLUSION: The iliopsoas notch is a consistent landmark of the acetabulum, although its anatomical appearance is widely variable. The iliopsoas notch arrangement cannot be predicted perioperatively based on the morphology of the proximal femur. The various shapes and sex-related differences detected in this study could be used for designing new hip implants or could be utilized during cup positioning in total hip arthroplasty.
- MeSH
- acetabulum * anatomie a histologie MeSH
- dolní končetina MeSH
- femur chirurgie MeSH
- kosterní svaly chirurgie MeSH
- lidé MeSH
- náhrada kyčelního kloubu * škodlivé účinky MeSH
- Check Tag
- lidé MeSH
- mužské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
Diamond-like carbon (DLC) layers are known for their high corrosion and wear resistance, low friction, and high biocompatibility. However, it is often necessary to dope DLC layers with additional chemical elements to strengthen their adhesion to the substrate. Ti-DLC layers (doped with 0.4, 2.1, 3.7, 6.6, and 12.8 at.% of Ti) were prepared by dual pulsed laser deposition, and pure DLC, glass, and polystyrene (PS) were used as controls. In vitro cell-material interactions were investigated with an emphasis on cell adhesion, proliferation, and osteogenic differentiation. We observed slightly increasing roughness and contact angle and decreasing surface free energy on Ti-DLC layers with increasing Ti content. Three-week biological experiments were performed using adipose tissue-derived stem cells (ADSCs) and bone marrow mesenchymal stem cells (bmMSCs) in vitro. The cell proliferation activity was similar or slightly higher on the Ti-doped materials than on glass and PS. Osteogenic cell differentiation on all materials was proved by collagen and osteocalcin production, ALP activity, and Ca deposition. The bmMSCs exhibited greater initial proliferation potential and an earlier onset of osteogenic differentiation than the ADSCs. The ADSCs showed a slightly higher formation of focal adhesions, higher metabolic activity, and Ca deposition with increasing Ti content.
BACKGROUND: Total knee arthroplasty (TKA) with all-polyethylene tibial (APT) components has shown comparable survivorship and clinical outcomes to that with metal-backed tibial (MBT). Although MBT is more frequently implanted, APT equivalents are considered a low-cost variant for elderly patients. A biomechanical analysis was assumed to be suitable to compare the response of the periprosthetic tibia after implantation of TKA NexGen APT and MBT equivalent. METHODS: A standardised load model was used representing the highest load achieved during level walking. The geometry and material models were created using computed tomography data. In the analysis, a material model was created that represents a patient with osteopenia. RESULTS: The equivalent strain distribution in the models of cancellous bone with an APT component showed values above 1000 με in the area below the medial tibial section, with MBT component were primarily localised in the stem tip area. For APT variants, the microstrain values in more than 80% of the volume were in the range from 300 to 1500 με, MBT only in less than 64% of the volume. CONCLUSION: The effect of APT implantation on the periprosthetic tibia was shown as equal or even superior to that of MBT despite maximum strain values occurring in different locations. On the basis of the strain distribution, the state of the bone tissue was analysed to determine whether bone tissue remodelling or remodelling would occur. Following clinical validation, outcomes could eventually modify the implant selection criteria and lead to more frequent implantation of APT components.
Background: Objective criteria to accurately evaluate the ability of a patient to make a risk-free return to their previous level of activity after anterior cruciate ligament reconstruction (ACLR) and to progress through stages of the rehabilitation process are still widely discussed. Objective: The goal of the study was to investigate the functional status of non-elite football players 6 months after ACLR based on the Functional Movement Screen test (FMS) and side-to-side differences of isokinetic quadriceps and hamstring peak torque between the operated (OP) and non-operated (NOP) extremities. Methods: A total of 35 football players (male:female ratio 31:4, mean age 24.7 ± 2.8 years) who had undergone primary and isolated ACLR were assessed 6 months (mean 6.1 ± 2.6) after surgery. Functional performance evaluation included the FMS test and isokinetic quadriceps/hamstring peak torque values examined using the Biodex Testing System at angular velocities of 60 deg/s and 180 deg/s. In addition, side-to-side differences for flexion and extension at both angular velocities were calculated by the limb symmetry index. Results: In the functional assessment, the overall score of the FMS test was 15.34 ± 2.60. Moreover, inter-extremity differences in all isokinetic strength tests were statistically significant. Isokinetic strength peak torques of quadriceps and hamstring of NOP were significantly higher than those of OP at both angular velocities (p < .001). The limb symmetry index results for recorded peak torques at 60 deg/s were 75% in extension and 88% in flexion and at 180 deg/s were 79% in extension and 86% in flexion. Conclusion: The presented data indicate explicit inter-extremity muscles strength differences and disturbances in global movement patterns after ACLR. Delayed recovery of muscle strength and disparities between the OP and NOP limbs 6 months after ACLR may undermine the patient's readiness to return to preoperative activity.
- MeSH
- čtyřhlavý sval stehenní MeSH
- dospělí MeSH
- fotbal zranění MeSH
- lidé MeSH
- návrat ke sportu MeSH
- posouzení stavu pacienta MeSH
- rekonstrukce předního zkříženého vazu * metody rehabilitace MeSH
- výsledek terapie MeSH
- zadní stehenní svaly MeSH
- Check Tag
- dospělí MeSH
- lidé MeSH
- mužské pohlaví MeSH
- ženské pohlaví MeSH
- Publikační typ
- klinická studie MeSH
PURPOSE OF THE STUDY The study aimed to propose an optimal based fl ap creation with the view to ensure long-term survival of the interposition arthroplasty. MATERIAL AND METHODS A total of 28 dorsal wrist capsules were collected from 16 cadavers (with age range at death 18 to 80 years, with no visible wrist pathology). Altogether 112 histological specimens were obtained from these 28 samples. Post-hoc Dunn's tests were used to analyse the percentage of vascularisation of individual sides of the dorsal capsule (circumference and area) at the 0.05 level of signifi cance. Spearmann's correlation analysis was used to assess the effect of age on vascularization of the dorsal wrist capsule. In cadavers in whom both capsules were collected, the limbs were compared. For the sake of comparison, the Wilcoxon matched pairs test was used. RESULTS Regarding statistical signifi cance, the largest share of the total circumference and area of the measured vessels of the dorsal capsule is constituted by the distal side (35.2% of the circumference and 30.9% of the area). The blood supply of the dorsal capsule received on the ulnar side is the lowest (12.9% of the circumference and 17.6% of the area). There was no signifi cant effect of age on vascularization of the dorsal wrist capsule confi rmed. Also, the comparison of vascularization of both limbs from a single cadaver did not yield any statistically signifi cant results. DISCUSSION Proximal row carpectomy is a long-established surgical technique used to manage the degenerative changes in the wrist. Our results showed the best vascularization on the distal and radial sides of the dorsal wrist capsule. In this light, the distally-based fl ap or the fl ap described by Berger, which respects the clinically important ligaments, appear to be the least invasive and help maintain the future stability of the wrist. CONCLUSIONS In clinical practice, we advise that a radially-based fl ap according to Berger is created and the distal side of the dorsal capsule, the most vascularized portion based on our results, is preserved as much as possible. The fl ap created in this manner also preserves the important carpal ligaments and appears to the authors of this study to be the most benefi cial, also with respect to the presence of the largest arteries, contrary to the distal side. Another option is to use a distally-based fl ap for interposition arthroplasty. Key words: interposition arthroplasty, proximal row carpectomy, vascularization, degenerative changes, wrist.
- MeSH
- artroplastika metody MeSH
- dospělí MeSH
- karpální klouby * chirurgie MeSH
- kosti zápěstní * chirurgie MeSH
- lidé středního věku MeSH
- lidé MeSH
- mladiství MeSH
- mladý dospělý MeSH
- mrtvola MeSH
- rozsah kloubních pohybů MeSH
- senioři nad 80 let MeSH
- senioři MeSH
- zápěstní kloub chirurgie MeSH
- Check Tag
- dospělí MeSH
- lidé středního věku MeSH
- lidé MeSH
- mladiství MeSH
- mladý dospělý MeSH
- senioři nad 80 let MeSH
- senioři MeSH
- Publikační typ
- anglický abstrakt MeSH
- časopisecké články MeSH
PURPOSE OF THE STUDY The purpose of this study was to minimize tourniquet-induced ischemia-reperfusion injury (IRI) in total knee arthroplasty (TKA) surgery using the remote ischemic preconditioning (RIPC) model, as well as to assess antioxidant balance with thioldisulfi de homeostasis (TDH). The secondary goal is to evaluate the impact of RIPC on TKA clinical outcomes. MATERIAL AND METHODS Patients in the ASA I-III group who underwent elective TKA were enrolled in this prospective, randomized, double-blind clinical research. TDH parameters were measured individually in groups with (Group I) and without (Group K) RIPC at the following times: preoperative (T0), right before the pneumatic tourniquet was opened (T1), 1 (T2), 6 (T3), and 24 (T4) hours after it was opened. In addition, at 3-hour intervals, the postoperative pain level was assessed using a visual analog scale (VAS). RESULTS This study included 60 cases (Group K; n=30, Group I; n=30). Both groups had equal native thiol, total thiol, disulfi de levels, disulfi de/native thiol, disulfi de/total thiol, and native thiol/total thiol ratios (p>0.05 for each). The change in native thiol, total thiol, and disulfi de values at T0 and T4 periods, however, was not statistically signifi cant for Group K (p=0.049, p=0.047, p=0.037, and p=0.217, p=0.191, p=0.220, respectively). At the 15th hour, VAS values in group I were considerably lower than in Group K (p=0.002). DISCUSSION This prospective, randomized, controlled trial examined how RIPC affected tourniquet-induced IRI-induced oxidative stress in TKA surgery. Lower native, total, and disulfi de levels at each postoperative time point were signifi cant. RIPC may reduce tourniquet-induced IRI-induced oxidative stress and TDH in TKA surgery. RIPC also reduced postoperative discomfort. CONCLUSIONS Our fi ndings suggest that RIPC may protect against the oxidative stress caused by IRI during limb surgery with a tourniquet and improve postoperative clinical outcomes. Key words: remote ischemic preconditioning, ischemia-reperfusion injury, thiol-disulfi de balance, oxidative stress, total knee arthroplasty.
- MeSH
- dvojitá slepá metoda MeSH
- lidé MeSH
- přivykání k ischémii * metody MeSH
- prospektivní studie MeSH
- reperfuzní poškození * etiologie prevence a kontrola MeSH
- totální endoprotéza kolene * škodlivé účinky MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- randomizované kontrolované studie MeSH
PURPOSE OF THE STUDY Different techniques have been reported to reconstruct the defi cient acetabulum during total hip arthroplasty (THA). The purpose of this study was to compare the biomechanical features of the bulk bone graft (BBG) technique (Harris acetabular plasty) and the Roof Step Cut (RSC) technique using fi nite element analysis. MATERIAL AND METHODS Based on a female patient's dysplastic hip CT scan, 3D models were assembled according to the two techniques. For the Harris technique, an irregular BBG was sculpted from a solid sphere, while for the RSC technique, the graft was sculpted into a step-cut shape with a similar size. Each graft was fi xed with two compression screws at two different angles (0° and 45°). Four fi nite element models were used to compare the von Mises stress distribution and total deformation of the grafts and the screws. The pressure and sliding distances of the contacts between the bone graft, metal cup and acetabular host bone were also analyzed. RESULTS For both of the bone grafts and the screws, compared to the Harris models, the maximum stress of the RSC models was signifi cantly lower (16.56 MPa, 25.50 MPa vs 97.13 MPa, 112.72 MPa) and the total deformation was signifi cantly smaller (0.0096 mm, 0.0089 mm vs 0.022 mm, 0.018 mm). 45° inserted screws generated higher stress at the end of the screws and on the outside of the bone graft. In case of 0° inserted screws, the maximum value was mainly located in the middle of the screws, inside the screw channel as well as at the contact area between the graft and the host bone. At all analyzed contacts, the RSC technique shows signifi cantly lower pressure and sliding distances, irrelevant to the screw's insertion angle. In comparison, the model of BBG with 45° screws showed a signifi cant sliding effect and higher contact pressure. CONCLUSIONS Compared with the BBG technique, the step-shaped graft of the RSC technique could signifi cantly reduce the maximum stress and deformation of the graft and the screws, and decrease the pressure and sliding distance between the bone graft, metal cup and the acetabular host bone. The angle of screw placement affects the location of stress and deformation. Key words: developmental dysplasia of the hip, total hip arthroplasty, acetabular reconstruction, bone graft, fi nite element analysis.
PURPOSE OF THE STUDY Dislocation is one of the most common early complications of total hip arthroplasty (THA). In this manuscript, 20 years of experience with the management of this complication are presented, particularly in relation to the type of instability. MATERIAL AND METHODS In the period between January 1999 and December 2020, at least one dislocation occurred in 157 of 8 286 (1.9%) THA patients, of which 117 dislocations (1.6%) in primary and 40 (3.4%) in revision THAs. Almost all patients were operated on from the anterolateral approach during the follow-up period. The type of dislocation was evaluated using the modified Dorr classification. In the first dislocations, conservative approach was usually opted for, except for cases with a clear malposition, irreducible or unstable hips after the reduction. The minimum follow-up period was 18 months (18-240). The success rate of the chosen treatment approach was assessed by means of standard statistical methods. RESULTS The total dislocation rate in the follow-up period was 1.6% for primary THAs and 3.4% for revision THAs. The dislocation rate was slightly higher between 1999 and 2009 compared to the following decade (2.1% versus 1.3% for primary THAs; p=0.009). The most common type of dislocation was the positional dislocation (62%), followed by dislocations due to a combination of causes (17%) and component malposition (11%). Treatment of dislocation was successful in a total of 130 patients (130/157; 83%). Even though a stable hip was achieved in 21 patients (13%), the functional outcome was unsatisfactory, and in 6 patients (4%) we failed to achieve a stable hip. In the positional type of dislocation, the success rate of closed reduction following the first-time dislocation was 86.4% and a similar success rate was reported for reoperations in the first-time dislocations due to the malpositioned components (85.7%). In the second-time dislocation, the surgical therapy was significantly more reliable compared to closed reduction regardless of the type of dislocation (78.6% versus 46%). The treatment of dislocations following primary THAs showed comparable outcomes to those of the treatment of dislocations following revision THAs. Overall, the worst outcomes were achieved in patients with a combined type of dislocation. In total, the THA had to be removed in 11.5% of hips (18/157). The probability of final THA removal increased with the increasing order of dislocation. DISCUSSION In our group of patients, the dislocation rate in THA was comparable or lower than the published data. With the use of preventive measures, i.e. dual mobility cup or larger head diameters in high-risk patients, we managed to reduce the dislocation rate over time. The positional type of dislocation prevails in our group of patients just as in the previously published series, followed by instability from malposition of components. The modified Dorr classification is used to guide the treatment since it allows us not only to make good decision about the treatment modality but to some extent also to estimate the final outcome, particularly with respect to restoring a functional and stable hip. CONCLUSIONS The total dislocation rate was 1.6% for primary THAs and 3.4% for revision THAs. The first-time dislocation of the positional type shall be treated conservatively. Conversely, in the other types of dislocations and in recurrent dislocations, surgical treatment is more likely to achieve a good clinical outcome. The worst outcomes are to be expected in an instability due to combination of multiple causes, which leads to the removal of THA more often than in other types of dislocations. Also, the benefit of preventive measures in high-risk patients over time has been confirmed. Key words: total hip arthroplasty, dislocation, Dorr's classification, treatment strategy, outcomes, complications.
- MeSH
- dislokace kloubu * MeSH
- lidé MeSH
- náhrada kyčelního kloubu * škodlivé účinky MeSH
- reoperace MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- anglický abstrakt MeSH
- časopisecké články MeSH
Článek se zabývá porovnáním intenzivní rehabilitace s telerehabilitací prováděnou v domácím prostředí pomocí běžných počítačových komunikačních technologií. Pro zhodnocení efektu telerehabilitace byl natočen instruktážní film, podle kterého pacienti po operaci artroplastiky kyčelního kloubu cvičili samostatně ve svém sociálním prostředí. Celkem 92 pacientů, kteří podstoupili operaci artroplastiky kyčelního kloubu, bylo rozděleno na dvě skupiny. Skupina 1 (kontrolní) byla složená z klientů, kteří nastoupili na lůžkové oddělení zdravotnického zařízení k intenzivní čtrnáctidenní rehabilitaci. Skupina 2 (telerehabilitační) využila rehabilitaci v domácím prostředí a cvičila samostatně s možným dohledem fyzioterapeuta přes komunikační technologie. Sledování probíhalo 6 týdnů, kdy vstupní vyšetření bylo provedeno v prvním týdnu po operaci, kontrolní ve 3 týdnech a výstupní po 6 týdnech od operace totální endoprotézy kyčelního kloubu. U obou skupin byly porovnány hodnoty rozsahu pohybu (ROM) v kyčelním kloubu a obvodové míry operované končetiny. Funkční vyšetření bylo doplněno chůzí a zhodnoceno dle 10 Meter Walk Test (10 MWT). Výsledky studie poukazují na plnohodnotný terapeutický vliv telerehabilitace u pacientů po artroplastice kyčelního kloubu.
The article focuses on comparing intensive rehabilitation with telerehabilitation carried out in the home environment using common computer communication technologies. To assess the effect of telerehabilitation, an instructional video was recorded, according to which patients after hip joint arthroplasty performed exercises independently in their social environment. A total of 92 patients who underwent hip joint arthroplasty surgery were divided into two groups. Group C (control) consisted of clients who were admitted to the inpatient department of a medical facility for intensive 14-day rehabilitation. Group T (telerehabilitation) performed rehabilitation in their home environment and exercised independently with the possible supervision of a physiotherapist via communication technologies. The monitoring took place for 6 weeks, with the initial examination carried out in the first week after the surgery, a follow-up examination in the third week, and a final (exit) examination after 6 weeks of the total hip joint arthroplasty surgery. The range of motion (ROM) in the hip joint and the circumferential of the operated limb were compared for both groups. The functional examination was supplemented by walking and evaluated using the 10-Meter Walk Test (10MWT). The results of the study indicate a comprehensive therapeutic effect of telerehabilitation in patients after hip joint arthroplasty.