• Je něco špatně v tomto záznamu ?

Composite Scaffolds Based on Bacterial Cellulose for Wound Dressing Application

M. Das, O. Zandraa, C. Mudenur, N. Saha, P. Sáha, B. Mandal, V. Katiyar

. 2022 ; 5 (8) : 3722-3733. [pub] 20220719

Jazyk angličtina Země Spojené státy americké

Typ dokumentu časopisecké články, práce podpořená grantem

Perzistentní odkaz   https://www.medvik.cz/link/bmc22024827

Wound dressing materials fabricated using biocompatible polymers have become quite relevant in medical applications, and one such material is bacterial cellulose (BC) with exceptional properties in terms of biocompatibility, high purity, crystallinity (∼88%), and high water holding capacity. However, the lack of antibacterial activity slightly restricts its application as a wound dressing material. In this work, polycaprolactone (PCL) was first impregnated into the BC matrix to fabricate flexible bacterial cellulose-based PCL membranes (BCP), which was further functionalized with antibiotics gentamicin (GEN) and streptomycin (SM) separately, to form wound dressing composite scaffolds to aid infectious wound healing. Fourier transform infrared spectroscopy (FT-IR) results confirmed the presence of characteristic PCL and cellulose peaks in the composite scaffolds at 1720 cm-1, 3400 cm-1, and 2895 cm-1, respectively, explaining the successful interaction of PCL with the BC matrix, which is further corroborated by scanning electron microscopy (SEM) images. X-ray diffraction (XRD) studies revealed the formation of highly crystalline BCP films (∼86%). In vitro studies of the BC and BCP scaffolds against baby hamster kidney (BHK-21) cells revealed their cytocompatible nature; also the wettability studies indicated the hydrophilicity of the developed scaffolds, qualifying the main criterion in wound dressing applications. Energy dispersive X-ray analysis (EDX) of the drug loaded scaffolds showed the presence of sulfur in the composites. The prepared scaffolds also exhibited excellent antimicrobial activity against Escherichia coli and Staphylococcus aureus. The release profiles initially indicated a burst release (6 h) followed by controlled release of GEN (∼42%) and SM (∼58%) from the prepared scaffolds within 48 h. Hence, these results interpret that the prepared drug-functionalized cellulosic scaffolds have great potential as a wound dressing material in biomedical applications.

Citace poskytuje Crossref.org

000      
00000naa a2200000 a 4500
001      
bmc22024827
003      
CZ-PrNML
005      
20221031101119.0
007      
ta
008      
221017s2022 xxu f 000 0|eng||
009      
AR
024    7_
$a 10.1021/acsabm.2c00226 $2 doi
035    __
$a (PubMed)35853242
040    __
$a ABA008 $b cze $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a xxu
100    1_
$a Das, Munmi $u Department of Chemical Engineering, Indian Institute of Technology, Guwahati, Assam 781039, India $1 https://orcid.org/0000000343888815
245    10
$a Composite Scaffolds Based on Bacterial Cellulose for Wound Dressing Application / $c M. Das, O. Zandraa, C. Mudenur, N. Saha, P. Sáha, B. Mandal, V. Katiyar
520    9_
$a Wound dressing materials fabricated using biocompatible polymers have become quite relevant in medical applications, and one such material is bacterial cellulose (BC) with exceptional properties in terms of biocompatibility, high purity, crystallinity (∼88%), and high water holding capacity. However, the lack of antibacterial activity slightly restricts its application as a wound dressing material. In this work, polycaprolactone (PCL) was first impregnated into the BC matrix to fabricate flexible bacterial cellulose-based PCL membranes (BCP), which was further functionalized with antibiotics gentamicin (GEN) and streptomycin (SM) separately, to form wound dressing composite scaffolds to aid infectious wound healing. Fourier transform infrared spectroscopy (FT-IR) results confirmed the presence of characteristic PCL and cellulose peaks in the composite scaffolds at 1720 cm-1, 3400 cm-1, and 2895 cm-1, respectively, explaining the successful interaction of PCL with the BC matrix, which is further corroborated by scanning electron microscopy (SEM) images. X-ray diffraction (XRD) studies revealed the formation of highly crystalline BCP films (∼86%). In vitro studies of the BC and BCP scaffolds against baby hamster kidney (BHK-21) cells revealed their cytocompatible nature; also the wettability studies indicated the hydrophilicity of the developed scaffolds, qualifying the main criterion in wound dressing applications. Energy dispersive X-ray analysis (EDX) of the drug loaded scaffolds showed the presence of sulfur in the composites. The prepared scaffolds also exhibited excellent antimicrobial activity against Escherichia coli and Staphylococcus aureus. The release profiles initially indicated a burst release (6 h) followed by controlled release of GEN (∼42%) and SM (∼58%) from the prepared scaffolds within 48 h. Hence, these results interpret that the prepared drug-functionalized cellulosic scaffolds have great potential as a wound dressing material in biomedical applications.
650    _2
$a antibakteriální látky $x farmakologie $7 D000900
650    _2
$a Bacteria $7 D001419
650    12
$a obvazy $7 D001458
650    12
$a celulosa $x farmakologie $7 D002482
650    _2
$a Escherichia coli $7 D004926
650    _2
$a mikrobiální testy citlivosti $7 D008826
650    _2
$a spektroskopie infračervená s Fourierovou transformací $7 D017550
650    _2
$a hojení ran $7 D014945
655    _2
$a časopisecké články $7 D016428
655    _2
$a práce podpořená grantem $7 D013485
700    1_
$a Zandraa, Oyunchimeg $u Centre of Polymer Systems, University Institute, Tomas Bata University in Zlín, Tř. T. Bati 5678, 760 01 Zlín, Czech Republic
700    1_
$a Mudenur, Chethana $u Department of Chemical Engineering, Indian Institute of Technology, Guwahati, Assam 781039, India $1 https://orcid.org/0000000211494742
700    1_
$a Saha, Nabanita $u Centre of Polymer Systems, University Institute, Tomas Bata University in Zlín, Tř. T. Bati 5678, 760 01 Zlín, Czech Republic
700    1_
$a Sáha, Petr $u Centre of Polymer Systems, University Institute, Tomas Bata University in Zlín, Tř. T. Bati 5678, 760 01 Zlín, Czech Republic
700    1_
$a Mandal, Bishnupada $u Department of Chemical Engineering, Indian Institute of Technology, Guwahati, Assam 781039, India
700    1_
$a Katiyar, Vimal $u Department of Chemical Engineering, Indian Institute of Technology, Guwahati, Assam 781039, India $1 https://orcid.org/0000000347507653
773    0_
$w MED00209782 $t ACS applied bio materials $x 2576-6422 $g Roč. 5, č. 8 (2022), s. 3722-3733
856    41
$u https://pubmed.ncbi.nlm.nih.gov/35853242 $y Pubmed
910    __
$a ABA008 $b sig $c sign $y p $z 0
990    __
$a 20221017 $b ABA008
991    __
$a 20221031101116 $b ABA008
999    __
$a ok $b bmc $g 1854510 $s 1176117
BAS    __
$a 3
BAS    __
$a PreBMC
BMC    __
$a 2022 $b 5 $c 8 $d 3722-3733 $e 20220719 $i 2576-6422 $m ACS applied bio materials $n ACS Appl Bio Mater $x MED00209782
LZP    __
$a Pubmed-20221017

Najít záznam

Citační ukazatele

Možnosti archivace