-
Je něco špatně v tomto záznamu ?
Addition of metal chlorides to a HOCl conditioner can enhance bond strength to smear layer deproteinized dentin
K. Sanon, A. Tichy, T. Hatayama, O. Thanatvarakorn, T. Prasansuttiporn, T. Wada, Y. Shimada, K. Hosaka, M. Nakajima
Jazyk angličtina Země Anglie, Velká Británie
Typ dokumentu časopisecké články, práce podpořená grantem
- MeSH
- amidy analýza farmakologie MeSH
- chloridy analýza farmakologie MeSH
- dentin chemie MeSH
- dentinová adheziva chemie MeSH
- fosfáty farmakologie MeSH
- kyselina chlorná analýza farmakologie MeSH
- lidé MeSH
- pevnost v tahu MeSH
- pryskyřičné cementy chemie MeSH
- smear layer * MeSH
- testování materiálů MeSH
- vazba zubní * MeSH
- zubní cementy farmakologie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
OBJECTIVES: To evaluate the effect of smear layer deproteinization using hypochlorous acid (HOCl) with/without metal chlorides (SrCl2 and ZnCl2) on the microtensile bond strength (μTBS) of two simplified adhesives to dentin. METHODS: Human dentin surfaces with a standardized smear layer were pretreated using a 105 ppm HOCl solution with/without SrCl2 (0.05 M, 0.1 M, 0.2 M, 0.4 M) or ZnCl2 (0.05 M, 0.1 M, 0.2 M) for 5 s, 15 s, or 30 s. After the deproteinizing solution was washed out with water for 5 s, 15 s, or 30 s, pretreated surfaces were bonded with one-step self-etch adhesive Bond Force II or universal adhesive Clearfil Universal Bond Quick, and μTBS was measured after 24 h. Additionally, the deproteinizing effects of HOCl solutions with/without the metal chlorides were compared by measuring changes in the amide:phosphate ratio using attenuated total reflection Fourier transform infrared spectroscopy. Statistical analysis was performed using multifactor ANOVA, Tukey's post hoc tests and t-tests (p < 0.05). RESULTS: Pretreatment with pure HOCl for 15 s and 30 s significantly decreased the amide:phosphate ratio (p < 0.05), indicating effective deproteinization, but the μTBS of both adhesives increased significantly only if HOCl was washed out for 30 s (p < 0.05). Increasing the concentrations of metal chlorides enabled shortening of the wash-out time down to 5 s while maintaining the improved μTBS (p < 0.05). The deproteinizing effect of HOCl was not significantly altered by the addition of metal chlorides (p > 0.05). SIGNIFICANCE: The effectiveness of smear layer deproteinization using HOCl can be improved by the addition of metal chlorides, as their increasing concentration allowed to shorten the wash-out time from 30 s down to 5 s.
Citace poskytuje Crossref.org
- 000
- 00000naa a2200000 a 4500
- 001
- bmc22024994
- 003
- CZ-PrNML
- 005
- 20221031100210.0
- 007
- ta
- 008
- 221017s2022 enk f 000 0|eng||
- 009
- AR
- 024 7_
- $a 10.1016/j.dental.2022.06.006 $2 doi
- 035 __
- $a (PubMed)35715250
- 040 __
- $a ABA008 $b cze $d ABA008 $e AACR2
- 041 0_
- $a eng
- 044 __
- $a enk
- 100 1_
- $a Sanon, Kittisak $u Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, 1-5-45, Yushima, Bunkyo-ku, Tokyo 113-8549, Japan; Department of Operative Dentistry, Faculty of Dentistry, Chulalongkorn University, 34 Henri Dunant Road, Pathumwan, Bangkok 10330, Thailand
- 245 10
- $a Addition of metal chlorides to a HOCl conditioner can enhance bond strength to smear layer deproteinized dentin / $c K. Sanon, A. Tichy, T. Hatayama, O. Thanatvarakorn, T. Prasansuttiporn, T. Wada, Y. Shimada, K. Hosaka, M. Nakajima
- 520 9_
- $a OBJECTIVES: To evaluate the effect of smear layer deproteinization using hypochlorous acid (HOCl) with/without metal chlorides (SrCl2 and ZnCl2) on the microtensile bond strength (μTBS) of two simplified adhesives to dentin. METHODS: Human dentin surfaces with a standardized smear layer were pretreated using a 105 ppm HOCl solution with/without SrCl2 (0.05 M, 0.1 M, 0.2 M, 0.4 M) or ZnCl2 (0.05 M, 0.1 M, 0.2 M) for 5 s, 15 s, or 30 s. After the deproteinizing solution was washed out with water for 5 s, 15 s, or 30 s, pretreated surfaces were bonded with one-step self-etch adhesive Bond Force II or universal adhesive Clearfil Universal Bond Quick, and μTBS was measured after 24 h. Additionally, the deproteinizing effects of HOCl solutions with/without the metal chlorides were compared by measuring changes in the amide:phosphate ratio using attenuated total reflection Fourier transform infrared spectroscopy. Statistical analysis was performed using multifactor ANOVA, Tukey's post hoc tests and t-tests (p < 0.05). RESULTS: Pretreatment with pure HOCl for 15 s and 30 s significantly decreased the amide:phosphate ratio (p < 0.05), indicating effective deproteinization, but the μTBS of both adhesives increased significantly only if HOCl was washed out for 30 s (p < 0.05). Increasing the concentrations of metal chlorides enabled shortening of the wash-out time down to 5 s while maintaining the improved μTBS (p < 0.05). The deproteinizing effect of HOCl was not significantly altered by the addition of metal chlorides (p > 0.05). SIGNIFICANCE: The effectiveness of smear layer deproteinization using HOCl can be improved by the addition of metal chlorides, as their increasing concentration allowed to shorten the wash-out time from 30 s down to 5 s.
- 650 _2
- $a amidy $x analýza $x farmakologie $7 D000577
- 650 _2
- $a chloridy $x analýza $x farmakologie $7 D002712
- 650 12
- $a vazba zubní $7 D001840
- 650 _2
- $a zubní cementy $x farmakologie $7 D003738
- 650 _2
- $a dentin $x chemie $7 D003804
- 650 _2
- $a dentinová adheziva $x chemie $7 D017220
- 650 _2
- $a lidé $7 D006801
- 650 _2
- $a kyselina chlorná $x analýza $x farmakologie $7 D006997
- 650 _2
- $a testování materiálů $7 D008422
- 650 _2
- $a fosfáty $x farmakologie $7 D010710
- 650 _2
- $a pryskyřičné cementy $x chemie $7 D019279
- 650 12
- $a smear layer $7 D016369
- 650 _2
- $a pevnost v tahu $7 D013718
- 655 _2
- $a časopisecké články $7 D016428
- 655 _2
- $a práce podpořená grantem $7 D013485
- 700 1_
- $a Tichy, Antonin $u Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, 1-5-45, Yushima, Bunkyo-ku, Tokyo 113-8549, Japan; Institute of Dental Medicine, First Faculty of Medicine of the Charles University and General University Hospital in Prague, Karlovo namesti 32, Prague 121 11, Czech Republic
- 700 1_
- $a Hatayama, Takashi $u Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, 1-5-45, Yushima, Bunkyo-ku, Tokyo 113-8549, Japan
- 700 1_
- $a Thanatvarakorn, Ornnicha $u Faculty of Dentistry, Bangkokthonburi University, 16/10 Leab Klong Taweewatana Rd., Taweewatana, Bangkok 10170, Thailand
- 700 1_
- $a Prasansuttiporn, Taweesak $u Department of Restorative Dentistry and Periodontology, Faculty of Dentistry, Chiang Mai University, Suthep, Muang Chiang Mai, Chiang Mai 50200, Thailand; Center of Excellence in Materials Science and Technology, Chiang Mai University, Suthep, Muang Chiang Mai, Chiang Mai 50200, Thailand
- 700 1_
- $a Wada, Takahiro $u Department of Advanced Biomaterials, Graduate School of Medical and Dental Sciences, Medical and Dental Science and Technology, Tokyo Medical and Dental University, 1-5-45, Yushima, Bunkyo-ku, Tokyo 113-8549, Japan
- 700 1_
- $a Shimada, Yasushi $u Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, 1-5-45, Yushima, Bunkyo-ku, Tokyo 113-8549, Japan
- 700 1_
- $a Hosaka, Keiichi $u Department of Regenerative Dental Medicine, Tokushima University Graduate School of Biomedical Sciences, 3-18-15 Kuramotocho, Tokushima 770-8504, Japan
- 700 1_
- $a Nakajima, Masatoshi $u Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, 1-5-45, Yushima, Bunkyo-ku, Tokyo 113-8549, Japan; Department of Regenerative Dental Medicine, Tokushima University Graduate School of Biomedical Sciences, 3-18-15 Kuramotocho, Tokushima 770-8504, Japan. Electronic address: nakajima.ope@tmd.ac.jp
- 773 0_
- $w MED00001334 $t Dental materials $x 1879-0097 $g Roč. 38, č. 8 (2022), s. 1235-1247
- 856 41
- $u https://pubmed.ncbi.nlm.nih.gov/35715250 $y Pubmed
- 910 __
- $a ABA008 $b sig $c sign $y p $z 0
- 990 __
- $a 20221017 $b ABA008
- 991 __
- $a 20221031100208 $b ABA008
- 999 __
- $a ok $b bmc $g 1854608 $s 1176284
- BAS __
- $a 3
- BAS __
- $a PreBMC
- BMC __
- $a 2022 $b 38 $c 8 $d 1235-1247 $e 20220615 $i 1879-0097 $m Dental materials $n Dent Mater $x MED00001334
- LZP __
- $a Pubmed-20221017