-
Je něco špatně v tomto záznamu ?
Technical note: MR-compatible pedal ergometer with electromechanical pedal resistance and exercise triggering enhanced by visual feedback via video display
P. Sedivy, M. Dezortova, J. Rydlo, P. Moravec, I. Krizek, B. Setinova, D. Pajuelo, M. Burian, M. Hajek
Jazyk angličtina Země Spojené státy americké
Typ dokumentu časopisecké články
Grantová podpora
Ministry of Health, Czech Republic-DRO "Institute for Clinical and Experimental Medicine - IKEM, IN 00023001"
LX22NPO5104
National Institute for Research of Metabolic and Cardiovascular Diseases. Funded by the European Union - Next Generation EU, Programme EXCELES
PubMed
37665757
DOI
10.1002/mp.16682
Knihovny.cz E-zdroje
- MeSH
- cvičení MeSH
- lidé MeSH
- magnetická rezonanční spektroskopie metody MeSH
- magnetická rezonanční tomografie * MeSH
- reprodukovatelnost výsledků MeSH
- senzorická zpětná vazba * MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
BACKGROUND: During and after exercise, dynamic 31 P MR parameters are typically measured using an MR-compatible ergometer. Self-built equipment for local condition can be constructed where possible. PURPOSE: To develop a pedal resistance ergometer with rocker arm based on a system that combines electric weight displacement, visual self-monitoring, and exercise triggering. The repeatability and reproducibility were tested. METHODS: The hardware and software for the ergometer were constructed from commercial components in a home laboratory. Twelve volunteers participated in the testing of the ergometer. RESULTS: A fully automated ergometer system was developed, allowing the pedal resistance to be adjusted during the examination. The system includes a self-monitoring and triggering mechanism that enables both the operator and subject to monitor pedal frequency and force. The operator can modify the pedal resistance as desired during the exercise. This self-monitoring solution is simple and cost-effective, requiring only a commercial potentiometer, an Arduino converter, and a conventional video projector with a personal computer (PC). Additionally, all system components are located outside the magnetic resonance (MR) room, avoiding interference with the MR system. Results of several test of the reproducibility/repeatability of power at three pedal resistance values (15%, 24%, 25% maximal voluntary force) were expressed both as a coefficient of variation ranging from 6% to 3.1% and as an intraclass correlation of coefficient ranging from 0.96 to 0.99. Similar values were also found for other dynamic parameters of 31 P MR spectroscopy. These findings are similar to published data obtained on different types of ergometers. CONCLUSIONS: Based on more than 1 year of usage, the ergometer proved successful in handling stationary and variable loads, and can be easily operated by a single user.
Citace poskytuje Crossref.org
- 000
- 00000naa a2200000 a 4500
- 001
- bmc24000500
- 003
- CZ-PrNML
- 005
- 20240213093223.0
- 007
- ta
- 008
- 240109s2023 xxu f 000 0|eng||
- 009
- AR
- 024 7_
- $a 10.1002/mp.16682 $2 doi
- 035 __
- $a (PubMed)37665757
- 040 __
- $a ABA008 $b cze $d ABA008 $e AACR2
- 041 0_
- $a eng
- 044 __
- $a xxu
- 100 1_
- $a Sedivy, Petr $u MR Unit, Department of Diagnostic and Interventional Radiology, Institute for Clinical and Experimental Medicine, Prague, Czech Republic
- 245 10
- $a Technical note: MR-compatible pedal ergometer with electromechanical pedal resistance and exercise triggering enhanced by visual feedback via video display / $c P. Sedivy, M. Dezortova, J. Rydlo, P. Moravec, I. Krizek, B. Setinova, D. Pajuelo, M. Burian, M. Hajek
- 520 9_
- $a BACKGROUND: During and after exercise, dynamic 31 P MR parameters are typically measured using an MR-compatible ergometer. Self-built equipment for local condition can be constructed where possible. PURPOSE: To develop a pedal resistance ergometer with rocker arm based on a system that combines electric weight displacement, visual self-monitoring, and exercise triggering. The repeatability and reproducibility were tested. METHODS: The hardware and software for the ergometer were constructed from commercial components in a home laboratory. Twelve volunteers participated in the testing of the ergometer. RESULTS: A fully automated ergometer system was developed, allowing the pedal resistance to be adjusted during the examination. The system includes a self-monitoring and triggering mechanism that enables both the operator and subject to monitor pedal frequency and force. The operator can modify the pedal resistance as desired during the exercise. This self-monitoring solution is simple and cost-effective, requiring only a commercial potentiometer, an Arduino converter, and a conventional video projector with a personal computer (PC). Additionally, all system components are located outside the magnetic resonance (MR) room, avoiding interference with the MR system. Results of several test of the reproducibility/repeatability of power at three pedal resistance values (15%, 24%, 25% maximal voluntary force) were expressed both as a coefficient of variation ranging from 6% to 3.1% and as an intraclass correlation of coefficient ranging from 0.96 to 0.99. Similar values were also found for other dynamic parameters of 31 P MR spectroscopy. These findings are similar to published data obtained on different types of ergometers. CONCLUSIONS: Based on more than 1 year of usage, the ergometer proved successful in handling stationary and variable loads, and can be easily operated by a single user.
- 650 _2
- $a lidé $7 D006801
- 650 _2
- $a reprodukovatelnost výsledků $7 D015203
- 650 12
- $a senzorická zpětná vazba $7 D056228
- 650 _2
- $a magnetická rezonanční spektroskopie $x metody $7 D009682
- 650 12
- $a magnetická rezonanční tomografie $7 D008279
- 650 _2
- $a cvičení $7 D015444
- 655 _2
- $a časopisecké články $7 D016428
- 700 1_
- $a Dezortova, Monika $u MR Unit, Department of Diagnostic and Interventional Radiology, Institute for Clinical and Experimental Medicine, Prague, Czech Republic
- 700 1_
- $a Rydlo, Jan $u Information Technology Division, Institute for Clinical and Experimental Medicine, Prague, Czech Republic
- 700 1_
- $a Moravec, Petr $u Department of Medical Technology and Investments, Institute for Clinical and Experimental Medicine, Prague, Czech Republic
- 700 1_
- $a Krizek, Ivan $u ICAR, Prague, Czech Republic
- 700 1_
- $a Setinova, Bara $u MR Unit, Department of Diagnostic and Interventional Radiology, Institute for Clinical and Experimental Medicine, Prague, Czech Republic
- 700 1_
- $a Pajuelo, Dita $u MR Unit, Department of Diagnostic and Interventional Radiology, Institute for Clinical and Experimental Medicine, Prague, Czech Republic
- 700 1_
- $a Burian, Martin $u MR Unit, Department of Diagnostic and Interventional Radiology, Institute for Clinical and Experimental Medicine, Prague, Czech Republic
- 700 1_
- $a Hajek, Milan $u MR Unit, Department of Diagnostic and Interventional Radiology, Institute for Clinical and Experimental Medicine, Prague, Czech Republic
- 773 0_
- $w MED00003245 $t Medical physics $x 2473-4209 $g Roč. 50, č. 12 (2023), s. 8063-8068
- 856 41
- $u https://pubmed.ncbi.nlm.nih.gov/37665757 $y Pubmed
- 910 __
- $a ABA008 $b sig $c sign $y - $z 0
- 990 __
- $a 20240109 $b ABA008
- 991 __
- $a 20240213093220 $b ABA008
- 999 __
- $a ok $b bmc $g 2049263 $s 1210194
- BAS __
- $a 3
- BAS __
- $a PreBMC-MEDLINE
- BMC __
- $a 2023 $b 50 $c 12 $d 8063-8068 $e 20230904 $i 2473-4209 $m Medical physics $n Med Phys $x MED00003245
- GRA __
- $p Ministry of Health, Czech Republic-DRO "Institute for Clinical and Experimental Medicine - IKEM, IN 00023001"
- GRA __
- $a LX22NPO5104 $p National Institute for Research of Metabolic and Cardiovascular Diseases. Funded by the European Union - Next Generation EU, Programme EXCELES
- LZP __
- $a Pubmed-20240109
