The present study deals with modal work that is a type of framework for structural dynamic testing of linear structures. Modal analysis is a powerful tool that works on the modal parameters to ensure the safety of materials and eliminate the failure possibilities. The concept of classification through this study is validated for isotropic and orthotropic materials, reaching up to a 100% accuracy when deploying the machine learning approach between the mode number and the associated frequency of the interrelated variables that were extracted from modal analysis performed by ANSYS. This study shows a new classification method dependent only on the knowledge of resonance frequency of a specific material and opens new directions for future developments to create a single device that can identify and classify different engineering materials.

Department of Advanced Materials Institute for Nanomaterials Advanced Technologies and Innovation Technical University of Liberec 461 17 Liberec Czech Republic

Department of Machinery Construction Institute for Nanomaterials Advanced Technologies and Innovation Technical University of Liberec 461 17 Liberec Czech Republic

Department of Material Engineering Faculty of Textile Engineering Technical University of Liberec 461 17 Liberec Czech Republic

Department of Mechanical and Materials Engineering Vilnius Gediminas Technical University 10221 Vilnius Lithuania

Department of Nanoengineering Center for Physical Sciences and Technology 02300 Vilnius Lithuania

See more in PubMed

Noman M.T., Amor N., Petru M. Synthesis and applications of ZnO nanostructures (ZONSs): A review. Crit. Rev. Solid State Mater. Sci. 2021:1–43. doi: 10.1080/10408436.2021.1886041. DOI

Schmitz T.L., Smith K.S. Machining Dynamics. Springer; Berlin/Heidelberg, Germany: 2014.

Van Woensel G., Verdonck E., De Baerdemaeker J. Measuring the mechanical properties of apple tissue using modal analysis. J. Food Process Eng. 1988;10:151–163. doi: 10.1111/j.1745-4530.1988.tb00010.x. DOI

Amor N., Rasool G., Bouaynaya N.C., Shterenberg R. Constrained particle filtering for movement identification in forearm prosthesis. Signal Process. 2019;161:25–35. doi: 10.1016/j.sigpro.2019.03.012. DOI

Meddeb A., Amor N., Abbes M., Chebbi S. A novel approach based on crow search algorithm for solving reactive power dispatch problem. Energies. 2018;11:3321. doi: 10.3390/en11123321. DOI

Noman M.T., Petrů M. Functional properties of sonochemically synthesized zinc oxide nanoparticles and cotton composites. Nanomaterials. 2020;10:1661. doi: 10.3390/nano10091661. PubMed DOI PMC

Noman M.T., Petru M., Amor N., Louda P. Thermophysiological comfort of zinc oxide nanoparticles coated woven fabrics. Sci. Rep. 2020;10:21080. PubMed PMC

Noman M.T., Petru M., Militký J., Azeem M., Ashraf M.A. One-Pot Sonochemical Synthesis of ZnO Nanoparticles for Photocatalytic Applications, Modelling and Optimization. Materials. 2020;13:14. doi: 10.3390/ma13010014. PubMed DOI PMC

Islam K.T., Wijewickrema S., O’Leary S. A deep learning based framework for the registration of three dimensional multi-modal medical images of the head. Sci. Rep. 2021;11:1860. doi: 10.1038/s41598-021-81044-7. PubMed DOI PMC

Zhao Y., Chang C., Hannum M., Lee J., Shen R. Bayesian network-driven clustering analysis with feature selection for high-dimensional multi-modal molecular data. Sci. Rep. 2021;11:5146. PubMed PMC

Noman M.T., Militky J., Wiener J., Saskova J., Ashraf M.A., Jamshaid H., Azeem M. Sonochemical synthesis of highly crystalline photocatalyst for industrial applications. Ultrasonics. 2018;83:203–213. doi: 10.1016/j.ultras.2017.06.012. PubMed DOI

Noman M.T., Petru M. Effect of Sonication and Nano TiO2 on Thermophysiological Comfort Properties of Woven Fabrics. ACS Omega. 2020;5:11481–11490. doi: 10.1021/acsomega.0c00572. PubMed DOI PMC

Noman M.T., Petru M., Amor N., Yang T., Mansoor T. Thermophysiological comfort of sonochemically synthesized nano TiO2 coated woven fabrics. Sci. Rep. 2020;10:17204. doi: 10.1038/s41598-020-74357-6. PubMed DOI PMC

Noman M.T., Wiener J., Saskova J., Ashraf M.A., Vikova M., Jamshaid H., Kejzlar P. In-situ development of highly photocatalytic multifunctional nanocomposites by ultrasonic acoustic method. Ultrason. Sonochem. 2018;40:41–56. doi: 10.1016/j.ultsonch.2017.06.026. PubMed DOI

Mahmood A., Noman M.T., Pechočiaková M., Amor N., Petrů M., Abdelkader M., Militký J., Sozcu S., Hassan S.Z.U. Geopolymers and Fiber-Reinforced Concrete Composites in Civil Engineering. Polymers. 2021;13:2099. doi: 10.3390/polym13132099. PubMed DOI PMC

Anastasopoulos D., De Roeck G., Reynders E.P. One-year operational modal analysis of a steel bridge from high-resolution macrostrain monitoring: Influence of temperature vs. retrofitting. Mech. Syst. Signal Process. 2021;161:107951. doi: 10.1016/j.ymssp.2021.107951. DOI

Carpine R., Ientile S., Vacca N., Boscato G., Rospars C., Cecchi A., Argoul P. Modal identification in the case of complex modes–Use of the wavelet analysis applied to the after-shock responses of a masonry wall during shear compression tests. Mech. Syst. Signal Process. 2021;160:107753. doi: 10.1016/j.ymssp.2021.107753. DOI

Fang C., Zhang Y. An improved hybrid FE-SEA model using modal analysis for the mid-frequency vibro-acoustic problems. Mech. Syst. Signal Process. 2021;161:107957. doi: 10.1016/j.ymssp.2021.107957. DOI

Abo-Elkhier M., Hamada A., El-Deen A.B. Prediction of fatigue life of glass fiber reinforced polyester composites using modal testing. Int. J. Fatigue. 2014;69:28–35. doi: 10.1016/j.ijfatigue.2012.10.002. DOI

El-Labban H.F., AbdelAziz M., Yakout M., Elkhatib A. Prediction of mechanical properties of nano-composites using vibration modal analysis: Application to aluminum piston alloys. Mater. Perform. Charact. 2013;2:454–467. doi: 10.1520/MPC20130006. DOI

Yakout M., Elkhatib A., Nassef M. Rolling element bearings absolute life prediction using modal analysis. J. Mech. Sci. Technol. 2018;32:91–99. doi: 10.1007/s12206-017-1210-1. DOI

Chang K.-C., Kim C.-W. Modal-parameter identification and vibration-based damage detection of a damaged steel truss bridge. Eng. Struct. 2016;122:156–173. doi: 10.1016/j.engstruct.2016.04.057. DOI

Guan C., Zhang H., Wang X., Miao H., Zhou L., Liu F. Experimental and theoretical modal analysis of full-sized wood composite panels supported on four nodes. Materials. 2017;10:683. doi: 10.3390/ma10060683. PubMed DOI PMC

Noman M.T., Amor N., Petru M., Mahmood A., Kejzlar P. Photocatalytic Behaviour of Zinc Oxide Nanostructures on Surface Activation of Polymeric Fibres. Polymers. 2021;13:1227. doi: 10.3390/polym13081227. PubMed DOI PMC

LeCun Y., Bengio Y., Hinton G. Deep learning. Nature. 2015;521:436–444. doi: 10.1038/nature14539. PubMed DOI

Noman M.T., Petru M., Louda P. Woven textiles coated with zinc oxide nanoparticles and their thermophysiological comfort properties. J. Nat. Fibers. 2021:1–13. doi: 10.1080/15440478.2020.1870621. DOI

Sathya R., Abraham A. Comparison of supervised and unsupervised learning algorithms for pattern classification. Int. J. Adv. Res. Artif. Intell. 2013;2:34–38. doi: 10.14569/IJARAI.2013.020206. DOI

Li Y., Anderson-Sprecher R. Facies identification from well logs: A comparison of discriminant analysis and naïve Bayes classifier. J. Pet. Sci. Eng. 2006;53:149–157. doi: 10.1016/j.petrol.2006.06.001. DOI

Noman M.T., Ashraf M.A., Ali A. Synthesis and applications of nano-TiO2: A review. Environ. Sci. Pollut. Res. 2019;26:3262–3291. doi: 10.1007/s11356-018-3884-z. PubMed DOI

Noman M.T., Ashraf M.A., Jamshaid H., Ali A. A novel green stabilization of TiO2 nanoparticles onto cotton. Fibers Polym. 2018;19:2268–2277. doi: 10.1007/s12221-018-8693-y. DOI

Isobe T., Feigelson E.D., Akritas M.G., Babu G.J. Linear regression in astronomy. Astrophys. J. 1990;364:104–113. doi: 10.1086/169390. DOI

Amor N., Noman M.T., Petru M. Prediction of functional properties of nano TiO2 coated cotton composites by artificial neural network. Sci. Rep. 2021;11:12235. doi: 10.1038/s41598-021-91733-y. PubMed DOI PMC

Amor N., Noman M.T., Petru M., Mahmood A., Ismail A. Neural network-crow search model for the prediction of functional properties of nano TiO2 coated cotton composites. Sci. Rep. 2021;11:13649. PubMed PMC