The purpose of this work was to evaluate the selected physicochemical, rheological, and sensory properties of a new whey-enriched carrot juice beverage (carrot juice: whey ratios of 100:0; 95:5; 85:15; 75:25; 65:35) fermented with milk or water kefir starter cultures over a storage period of 21 days (at 4 ± 1 °C). In general, for all tested samples, the values of total soluble solids, pH, and density decreased with increasing storage time. In contrast, the values of ethanol, degree of fermentation, and total dissolved solids increased with the prolongation of the storage time. Furthermore, it was found that all the model samples exhibited pseudoplastic behavior. Based on the sensory analysis performed, samples containing 25% (w/w) whey were evaluated as the most acceptable. Last but not least, the present study can serve as a basis for optimizing the manufacturing technology of a novel fermented vegetable beverage enriched with whey.
- Klíčová slova
- carrot juice, fermented beverage, milk kefir starter culture, physicochemical properties, sensory analysis, water kefir starter culture, whey,
- Publikační typ
- časopisecké články MeSH
The novelty of this study is the investigation of the effect of different heat treatments and, simultaneously, the effect of different fat levels on the quality of pork liver pâtés. Hence, this study aimed to evaluate the effect of heat treatment and fat content on selected properties of pork liver pâté. For this purpose, four batches of pâtés with two different fat contents (30 and 40% (w/w)) and two different heat treatments (pasteurisation: target temperature 70 °C, holding time of 10 min; sterilisation: target temperature 122 °C, holding time of 10 min) were manufactured. Chemical (pH, dry matter, crude protein, total lipid, ammonia, and thiobarbituric acid reactive substances (TBARS)), microbiological, colour, textural, rheological, and sensory analyses were performed. Both different heat treatment and fat content affected most of the parameters observed. Sterilisation ensured the commercial sterility of the manufactured pâtés, resulting in elevated TBARS values, hardness, cohesiveness, gumminess and springiness, and increased rheological parameters (G', G″, G*, and η*), as well as colour changes (decrease in L* and increase in a*, b*, and C* values) and deterioration of appearance, consistency, and flavour also being detected (p < 0.05). Higher fat content caused similar variations in the textural and viscoelastic properties, i.e., the increase in hardness, cohesiveness, gumminess and springiness, and also in G', G″, G*, and η* (p < 0.05). However, the colour and sensorial parameters changed in different ways compared to the changes induced by the sterilisation effect. Overall, the observed changes might not be desirable for some consumers and further research would be appropriate to improve especially the sensorial attributes of sterilised pork liver pâtés.
- Klíčová slova
- fat level, lipid oxidation, pasteurisation, pork liver pâté, sterilisation, texture, viscoelastic properties,
- Publikační typ
- časopisecké články MeSH
This thorough study analyses the amounts of 43 minerals and trace elements in non-traditional wheat grains, flakes, and undigested flake portions using ICP-MS and establishes declines in their respective contents after the flake production. It also identifies appropriate dietary intakes, in vitro digestibility values, retention factors, and metal pollution indexes. The element contents in wheat flakes are lower than in wheat grains after the hydrothermal treatment process, and their declines are: Na (48-72%), Ce (47-72%), Sr (43-55%), Tl (33-43%), Ti (32-41%), U (31-44%), Ho (29-69%), Cr (26-64%), Zr (26-58%), Ag (25-52%), and Ca (25-46%). The flakes significantly contributed to the recommended dietary intake or adequate intake of particular elements for men of all categories as follows: Mn (143%) > Mo > Cu > Mg ≥ Cr > Fe (16%); for women: Mn (up to 183%) > Mo > Cu > Cr ≥ Mg > Fe (7-16%); for pregnant women aged 19-30: Mn (165%) > Mo > Cu > Mg > Cr (25%); and finally, for lactating women: Mn (127%) > Mo > Cu > Mg > Cr (17%). The contributions to the provisional tolerable weekly or monthly intakes of all toxic elements were established as being within the official limits. The daily intakes for non-essential elements were also calculated. The retention factors were calculated to assess the element concentrations in the undigested part using the digestibility values (87.4-90.5%). The highest retention factors were obtained for V (63-92%), Y (57-96%), Ce (43-76%), Pb (34-58%), Tl (32-70%), Ta (31-66%), and Ge (30-49%). K, Mg, P, Zn, Ba, Bi, Ga, Sb, Cu, Ni, and As appear to be released easily from flake matrices during digestion. The metal pollution index has been confirmed as being lower for non-traditional wheat flakes when compared with grains. Importantly, 15-25% of the metal pollution index assessed for native flakes remains in the undigested flake portion after in vitro digestion.
- Klíčová slova
- dietary intake evaluation, disease prevention, essential trace element, in vitro digestion, life stage group, metal pollution index, mineral, retention factor, toxic trace element, wheat flake,
- MeSH
- kovy analýza MeSH
- laktace MeSH
- lidé MeSH
- minerály analýza MeSH
- přijímání potravy MeSH
- pšenice MeSH
- stopové prvky * analýza MeSH
- těhotenství MeSH
- trávení MeSH
- Check Tag
- lidé MeSH
- mužské pohlaví MeSH
- těhotenství MeSH
- ženské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- kovy MeSH
- minerály MeSH
- stopové prvky * MeSH
The decarboxylation of the corresponding amino acids by microorganisms leads to the formation of biogenic amines (BAs). From a toxicological point of view, BAs can cause undesirable physiological effects in sensitive individuals, particularly if their metabolism is blocked or genetically altered. The current study aimed to monitor and evaluate the content of eight biogenic amines (BAs) in 232 samples of wines (white, rosé, red) produced in the Central European region (Zone B). White wines (180 samples), rosé wines (17 samples), and red wines (35 samples) were analyzed. High-performance liquid chromatography equipped with a ultraviolet-visible diode array detector (UV/VIS DAD) was applied to identify and quantify the BAs present in wines. In general, histamine (HIS), tyramine (TYM), putrescine (PUT), cadaverine (CAD), phenylethylamine (PEA), spermine (SPN) and spermidine (SPD) were detected in all tested wine samples. Tryptamine (TRM) was not present in any of the samples examined. In white and red wines, SPD, TYM, and PUT were most often detected. Regarding rosé wines, the three major BAs were SPN, TYM, and CAD. The BA content in red wines was generally higher than in rosé and white wines. However, HIS concentrations above the recommended limit of 10 mg/L were detected in 9% of the red wine samples. In addition, alarming levels of PUT, HIS, TYM, and PEA, with serious potential impact on consumer health, were recorded in two red wine samples. On the whole, the presence and concentrations of BAs in wine should be constantly evaluated, primarily because alcohol intensifies the hazardous effects of BAs.
- Klíčová slova
- Central Europe, HPLC, biogenic amines, food safety, wine,
- Publikační typ
- časopisecké články MeSH
The aim of the current study was to evaluate the addition of different algal hydrocolloids (κ-carrageenan, ι-carrageenan, furcellaran, and sodium alginate) at three different concentrations (0.50, 0.75, and 1.00% w/w) on the physicochemical, viscoelastic, textural, and organoleptic properties of model cream cheese (CC) samples. On the whole, the highest viscoelastic moduli and hardness values of the CC samples were reported when κ-carrageenan was used. Furthermore, increasing the concentrations of the tested hydrocolloids led to increases in the viscoelastic moduli and hardness values of CC. Recommendations for softer-consistency CC production include the application of κ-carrageenan at a concentration of 0.50-0.75% (w/w) or the use of furcellaran and sodium alginate at a concentration of 1.00% (w/w). For the production of CC with a more rigid consistency, it is recommended to apply κ-carrageenan at a concentration higher than 0.75% (w/w).
- Klíčová slova
- cream cheese, furcellaran, hydrocolloids, sodium alginate, viscoelastic properties, ι-carrageenan, κ-carrageenan,
- Publikační typ
- časopisecké články MeSH
The current study was conducted to evaluate the effect of the addition of selected hydrocolloids [agar (AG), κ-carrageenan (KC), or gelatin (PG); as a total replacement for emulsifying salts] on the viscoelastic properties and microstructure of processed cheese (PC) samples during a storage period of 60 days (at 6 ± 2 °C). In general, PC viscoelastic properties and microstructure were affected by the addition of hydrocolloids and the length of storage time. The evaluated PC reported a more elastic behavior (G′ > G″) over the viscous one. The highest values of viscoelastic moduli (G′; G″; G*) were recorded for PC samples manufactured with KC addition, followed by those prepared with AG and PG. The control sample presented values of viscoelastic moduli similar to those of the PG sample. All PC samples tested had fat globule size values lower than 1 μm. Moreover, PC with AG and KG addition presented similar microstructures and sizes of fat globules.
- Klíčová slova
- hydrocolloids, microstructure, processed cheese, rheology, storage time,
- Publikační typ
- časopisecké články MeSH
The scope of the study was the evaluation of the selected physicochemical (O2 and CO2 contents, bitterness, color, total polyphenol content (TPC), turbidity, foaming stability) and sensory properties of Czech lager beer with different original wort extract (OWE) values (OWE of 10.0; 11.0; 11.5; 12.0% w/w) during a cold storage period of 6 months (4 ± 2 °C). The length of the cold storage period did not influence the values of dissolved O2 and CO2, bitterness, color and foam stability of the samples. Contrarily, the TPC, turbidity, and sensory attributes of the samples were affected by the course of cold storage. The OWE values did not affect the development of the parameters tested. All beer samples stored until the 5th month presented "very good" sensory characteristics. Cold storage of beer is advantageous in order to maintain its freshness and sensory attributes at the highest level for the final consumer.
- Klíčová slova
- Czech beer, original wort extract, physicochemical properties, sensory attributes, storage,
- Publikační typ
- časopisecké články MeSH
This study reports the development of selected indicators affecting changes in food quality and safety of selected long-life canned (Szeged goulash, canned chicken meat, pork pâté, canned tuna fish) and dehydrated (instant goulash soup) food during a two-year storage experiment at four different temperatures. The storage temperatures were selected to represent Arctic (−18 °C), temperate (5 °C), subtropical (25 °C) and tropical (40 °C) climatic zones where such food is likely to be stored during, for example, humanitarian and military missions. Microorganism amounts below the detection limit (p < 0.05), regardless of the storage temperature (p ≥ 0.05), were monitored in canned samples. The contents of dry matter, fat and proteins did not change during storage, regardless of the storage temperature (p ≥ 0.05). During the 24-month storage, all food showed an increase in the level of ammonia (p < 0.05) and the TBARS-value (p < 0.05), whereas the rate of increase in both parameters was significantly higher at higher storage temperatures (p < 0.05). The losses of individual amino acids during storage ranged from 5% rel. calculated on the amino acid contents in Month “0” up to 15% rel. (p < 0.05). With storage temperatures above the freezing point, the hardness values decreased with the increase in the storage temperature (p < 0.05) and prolongation of the storage period (p < 0.05). Moreover, with temperatures of −18 °C, the development of hardness, measured as the “decrease rate”, was significantly higher compared to the absolute values.
- Klíčová slova
- food quality, food safety, long-life food, long-term storage, temperature regimens,
- Publikační typ
- časopisecké články MeSH
