The current study investigates and compares the biological effects of ultrathin conformal coatings of zirconium dioxide (ZrO2) and vanadium pentoxide (V2O5) on osteoblastic MG-63 cells grown on TiO2 nanotube layers (TNTs). Coatings were achieved by the atomic layer deposition (ALD) technique. TNTs with average tube diameters of 15, 30, and 100 nm were fabricated on Ti substrates (via electrochemical anodization) and were used as primary substrates for the study. The MG-63 cell growth and proliferation after 48 h of incubation on hybrid TNTs/ZrO2 and TNTs/V2O5 surfaces was evaluated in comparison to the uncoated TNTs of each diameter. The density of viable MG-63 cells was assessed for all the TNT surfaces, along with the cell morphology and the spreading behavior (i.e., the cell length). The ultrathin coatings retained the original morphology of the TNTs but changed the surface chemical composition, wettability, and cell behavior, whose interplay is the subject of the present investigation. These findings offer interesting views on the influence of the composition of biomedical implant surfaces, triggered by ALD ultrathin coatings on them. The outcomes of this work shed light on the assessment of the biocompatibility of the two different ALD coatings.

• Keywords
• MG-63, TiO2 nanotube layers, ZrO2, V2O5, atomic layer deposition, cell viability.,
• MeSH
• Coated Materials, Biocompatible * chemistry   pharmacology   MeSH
• Cell Line MeSH
• Electrodes MeSH
• Humans MeSH
• Nanotubes * chemistry   MeSH
• Osteoblasts * drug effects   cytology   MeSH
• Surface Properties MeSH
• Cell Proliferation * drug effects   MeSH
• Vanadium Compounds chemistry   pharmacology   MeSH
• Titanium * chemistry   pharmacology   MeSH
• Zirconium * chemistry   pharmacology   MeSH
• Check Tag
• Humans MeSH
• Publication type
• Journal Article MeSH
• Comparative Study MeSH
• Names of Substances
• Coated Materials, Biocompatible * MeSH
• Vanadium Compounds MeSH
• Titanium * MeSH
• titanium dioxide MeSH Browser
• vanadium pentoxide MeSH Browser
• zirconium oxide MeSH Browser
• Zirconium * MeSH

This work aims to describe the effect of the surface modification of TiO2 nanotube (TNT) layers on Ti-6Al-4V (TiAlV) alloy by ultrathin TiO2 coatings prepared via Atomic Layer Deposition (ALD) on the growth of MG-63 osteoblastic cells. The TNT layers with two distinctly different inner diameters, namely ∼15 nm and ∼50 nm, were prepared via anodic oxidation of the TiAlV alloy. Flat, i.e., non-anodized, TiAlV alloy foils were used as reference substrates. Additionally, a part of the TNT layers and alloy foils was coated with ultrathin coatings of TiO2 by ALD. The number of TiO2 ALD cycles used was 1 and 5 leading to a nominal TiO2 thickness of ∼0.055 and ∼0.3 nm, respectively. The ultrathin TiO2 coating by ALD enabled to optimize the surface hydrophilicity for optimal cell growth. In addition, coatings shaded impurities of V- and F-based species (stemming from the alloy and the anodization electrolyte) that affect the biocompatibility of the tested materials while preserving the original structure and morphology. The evaluation of the biocompatibility before and after TiO2 ALD coating on TiAlV flat surfaces and TNT layers was carried out using MG-63 osteoblastic cells and compared after incubation for up to 96 h. The cell growth, adhesion, and proliferation of the MG-63 on TiAlV foils and TNT layers showed significant enhancement after the surface modification by TiO2 ALD.

• Keywords
• MG-63 cells, Ti-6Al-4V alloy, TiO2 nanotube layers, atomic layer deposition, cell growth, cell proliferation,
• Publication type
• Journal Article MeSH

This work aims to investigate the chemical and/or structural modification of Ti and Ti-6Al-4V (TiAlV) alloy surfaces to possess even more favorable properties toward cell growth. These modifications were achieved by (i) growing TiO2 nanotube layers on these substrates by anodization, (ii) surface coating by ultrathin TiO2 atomic layer deposition (ALD), or (iii) by the combination of both. In particular, an ultrathin TiO2 coating, achieved by 1 cycle of TiO2 ALD, was intended to shade the impurities of F- and V-based species in tested materials while preserving the original structure and morphology. The cell growth on TiO2-coated and uncoated TiO2 nanotube layers, Ti foils, and TiAlV alloy foils were compared after incubation for up to 72 h. For evaluation of the biocompatibility of tested materials, cell lines of different tissue origin, including predominantly MG-63 osteoblastic cells, were used. For all tested nanomaterials, adding an ultrathin TiO2 coating improved the growth of MG-63 cells and other cell lines compared with the non-TiO2-coated counterparts. Here, the presented approach of ultrathin TiO2 coating could be used potentially for improving implants, especially in terms of shading problematic F- and V-based species in TiO2 nanotube layers.

• Keywords
• MG-63 cells, Ti foils, Ti-6Al-4V alloy, TiO2 nanotube layers, atomic layer deposition, cell proliferation,
• MeSH
• Nanostructures * chemistry   MeSH
• Alloys pharmacology   chemistry   MeSH
• Materials Testing MeSH
• Titanium * pharmacology   chemistry   MeSH
• Publication type
• Journal Article MeSH
• Names of Substances
• Alloys MeSH
• Titanium * MeSH
• titanium alloy (TiAl6V4) MeSH Browser

The combination of titania nanofilms and silver nanoparticles (NPs) is a very promising material, with antibacterial and osseointegration-induced properties for titanium implant coatings. In this work, we successfully prepared TiO2 nanolayer/Ag NP structures on titanium disks using atomic layer deposition (ALD). The samples were studied by scanning electron microscopy (SEM), X-ray diffraction, X-ray photoelectron spectroscopy (XPS), contact angle measurements, and SEM-EDS. Antibacterial activity was tested against Staphylococcus aureus. The in vitro cytological response of MG-63 osteosarcoma and human fetal mesenchymal stem cells (FetMSCs) was examined using SEM study of their morphology, MTT test of viability and differentiation using alkaline phosphatase and osteopontin with and without medium-induced differentiation in the osteogenic direction. The samples with TiO2 nanolayers, Ag NPs, and a TiO2/Ag combination showed high antibacterial activity, differentiation in the osteogenic direction, and non-cytotoxicity. The medium for differentiation significantly improved osteogenic differentiation, but the ALD coatings also stimulated differentiation in the absence of the medium. The TiO2/Ag samples showed the best antibacterial ability and differentiation in the osteogenic direction, indicating the success of the combining of TiO2 and Ag to produce a multifunctional biocompatible and bactericidal material.

• Keywords
• antibacterial properties, atomic layer deposition, cell differentiation, cell viability, mesenchymal stromal cells, nanoparticles, silver, thin films, titania,
• Publication type
• Journal Article MeSH