The most challenging task in the preparation of magnetic poly(N-isopropylacrylamide) (Fe3O4-PNIPAAm) nanocomposites for bio-applications is to maximise their reactivity and stability. Emulsion polymerisation, in situ precipitation and physical addition were used to produce Fe3O4-PNIPAAm-1, Fe3O4-PNIPAAm-2 and Fe3O4-PNIPAAm-3, respectively. Their properties were characterised using scanning electron microscopy (morphology), zeta-potential (surface charge), thermogravimetric analysis (stability), vibrating sample magnetometry (magnetisation) and dynamic light scattering. Moreover, we investigated the antibacterial effect of each nanocomposite against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. Both Fe3O4-PNIPAAm-1 and Fe3O4-PNIPAAm-2 nanocomposites displayed high thermal stability, zeta potential and magnetisation values, suggesting stable colloidal systems. Overall, the presence of Fe3O4-PNIPAAm nanocomposites, even at lower concentrations, caused significant damage to both E. coli and S. aureus DNA and led to a decrease in cell viability. Fe3O4-PNIPAAm-1 displayed a stronger antimicrobial effect against both bacterial strains than Fe3O4-PNIPAAm-2 and Fe3O4-PNIPAAm-3. Staphylococcus aureus was more sensitive than E. coli to all three magnetic PNIPAAm nanocomposites.

• Klíčová slova
• Bio-application, Escherichia coli, Magnetic poly(N-isopropylacrylamide), PNIPAAm, Staphylococcus aureus,
• Publikační typ
• časopisecké články MeSH

Nanofibers are an attractive option in drug release, especially as antibacterial materials. However, there is no universal antibacterial material and little attention has been devoted to bacteria-nanofiber attachment. Poly(N-isopropylacrylamide-co-acrylamide) is particularly interesting due to its dual thermo- and pH-responsive nature. Here, we prepared stimuli-responsive antibacterial nanofibers by the blend electrospinning of polycaprolactone (PCL), various concentrations of PNIPAm-co-AAm and ciprofloxacin (CIP). The lower critical solution temperature (LCST) of PNIPAm-co-AAm was determined by refractometry in distilled water and buffer solutions at pH 4 and 7.4. Based on the results obtained, we performed release tests, which indicated that the amount of released CIP and its release kinetics were dependent on nanofiber composition. Moreover, the nanofibers showed enhanced release at temperatures below LCST and, in turn, this led to enhanced antibacterial activity, as demonstrated by disk diffusion tests on Staphylococcus epidermidis and Escherichia coli. In addition, both bacterial strains demonstrated much lower attachment to CIP-loaded PCL/PNIPAm-co-AAm compared with CIP-loaded PCL nanofibers. Furthermore, cytocompatibility tests, performed using primary human dermal fibroblasts, produced similar good cell spreading regardless of PNIPAm-co-AAm concentration. Collectively, our results show that the proposed nanofibers have considerable potential as materials, which promote wound healing and significantly decrease the probability of bacterial infection.

• Klíčová slova
• bacterial adhesion, electrospun nanofibers, poly(N-isopropylacrylamide-co-acrylamide), polycaprolactone, responsive release,
• MeSH
• akrylamid MeSH
• akrylové pryskyřice MeSH
• antibakteriální látky farmakologie   MeSH
• ciprofloxacin farmakologie   MeSH
• Escherichia coli MeSH
• koncentrace vodíkových iontů MeSH
• lidé MeSH
• nanovlákna * chemie   MeSH
• polyestery MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH
• Názvy látek
• akrylamid MeSH
• akrylové pryskyřice MeSH
• antibakteriální látky MeSH
• ciprofloxacin MeSH
• poly(N-isopropylacrylamide-co-acrylamide) MeSH Prohlížeč
• polycaprolactone MeSH Prohlížeč
• polyestery MeSH

Exceptionally fast temperature-responsive, mechanically strong, tough and extensible monolithic non-porous hydrogels were synthesized. They are based on divinyl-crosslinked poly(N-isopropyl-acrylamide) (PNIPAm) intercalated by hydroxypropyl methylcellulose (HPMC). HPMC was largely extracted after polymerization, thus yielding a 'template-modified' PNIPAm network intercalated with a modest residue of HPMC. High contents of divinyl crosslinker and of HPMC caused a varying degree of micro-phase-separation in some products, but without detriment to mechanical or tensile properties. After extraction of non-fixed HPMC, the micro-phase-separated products combine superior mechanical properties with ultra-fast T-response (in 30 s). Their PNIPAm network was highly regular and extensible (intercalation effect), toughened by hydrogen bonds to HPMC, and interpenetrated by a network of nano-channels (left behind by extracted HPMC), which ensured the water transport rates needed for ultra-fast deswelling. Moreover, the T-response rate could be widely tuned by the degree of heterogeneity during synthesis. The fastest-responsive among our hydrogels could be of practical interest as soft actuators with very good mechanical properties (soft robotics), while the slower ones offer applications in drug delivery systems (as tested on the example of Theophylline), or in related biomedical engineering applications.

• Klíčová slova
• cellulose, drug release, hydrogels, poly(N-isopropylacrylamide), semi-interpenetrating networks, smart materials,
• Publikační typ
• časopisecké články MeSH

The cryopolymerization and formation of a macroporous poly(N-isopropylacrylamide) (PNIPA)/clay cryogel were investigated. The mechanism of the cryopolymerization and cryogel formation was elucidated. Two processes, cryostructuration and cryopolymerization, proceed simultaneously and their relative rates determine the structure evolution and the cryogel morphology - porosity. The cryostructuration in the PNIPA/clay system during freezing, controlled by the freezing temperature and the rate of cooling, includes both water and NIPA crystallization, formation of a highly concentrated non-frozen liquid phase (NFLP) and clay aggregation. The rate of cryopolymerization and gelation is governed by the following effects: by a low polymerization temperature and after freezing, by the high cryoconcentration and a steric confinement, manifested by a reduced reagent mobility. Moreover, it depends on the cooling rate and the evolution of cryostructuration. The progress of cryostructuration and cryopolymerization during freezing was described and experimentally proved step by step. Both the phase development during freezing and the progress of cryopolymerization including gelation were monitored in situ by NMR, DSC, chemorheology and SAXS. The morphology and porosity of the cryogels were characterized by SEM and TEM.

• Publikační typ
• časopisecké články MeSH

The formation of the hydrogel poly(N-isopropylacrylamide)-clay (LAPONITE®) by redox polymerization was investigated, and the main factors governing the gel build-up were determined. The significant effect of the redox initiating system ammonium peroxodisulfate (APS) and tetramethylethylenediamine (TEMED) on gel formation and structure was established, making it possible to control the structure of the gel. Moreover, the pre-reaction stage involving the quality of the clay exfoliation in an aqueous suspension and the interaction of reaction components with the clay play a role in controlling the polymerization and gel structure. The molecular and phase structure evolution during polymerization was followed in situ by the following independent techniques: Fourier transform infrared spectroscopy (FTIR), chemorheology, small-angle X-ray scattering (SAXS) and ultraviolet-visible spectroscopy (UV/Vis). The combination of these methods enabled us to describe in detail particular progress stages during the gel formation and determine the correlation of the corresponding processes on a time and conversion scale. The mechanism of gel formation was refined based on these experimental results.

• Publikační typ
• časopisecké články MeSH

Poly(N-isopropylacrylamide) (PNIPAM) is an important polymer with stimuli-responsive properties, making it suitable for various uses. Phase behavior of the temperature-sensitive PNIPAM polymer in the presence of four low-molecular weight additives tert-butylamine (t-BuAM), tert-butyl alcohol (t-BuOH), tert-butyl methyl ether (t-BuME), and tert-butyl methyl ketone (t-BuMK) was studied in water (D2O) using high-resolution nuclear magnetic resonance (NMR) spectroscopy and dynamic light scattering. Phase separation was thermodynamically modeled as a two-state process which resulted in a simple curve which can be used for fitting of NMR data and obtaining all important thermodynamic parameters using simple formulas presented in this paper. The model is based on a modified van't Hoff equation. Phase separation temperatures T p and thermodynamic parameters (enthalpy and entropy change) connected with the phase separation of PNIPAM were obtained using this method. It was determined that T p is dependent on additives in the following order: T p(t-BuAM) > T p(t-BuOH) > T p(t-BuME) > T p(t-BuMK). Also, either increasing the additive concentration or increasing pK a of the additive leads to depression of T p. Time-resolved 1H NMR spin-spin relaxation experiments (T 2) performed above the phase separation temperature of PNIPAM revealed high colloidal stability of the phase-separated polymer induced by the additives (relative to the neat PNIPAM/D2O system). Small quantities of selected suitable additives can be used to optimize the properties of PNIPAM preparations including their phase separation temperatures, colloidal stabilities, and morphologies, thus improving the prospects for the application.

• Publikační typ
• časopisecké články MeSH

We present a method for creating ordered 2D structures with material anisotropy from self-assembling micro-sized hydrogel particles (microgels). Microgel platelets of polygonal shapes (hexagon, square, and rhombus), obtained by a continuous scalable lithographic process, are suspended in an aqueous environment and sediment on an inclined plane. As a consequence of gravitational pull, they slide over the plane. Each half of the microgel is composed of a different type of hydrogel [poly(N-isopropylacrylamide) (PNIPAM), and poly(ethylene glycol) diacrylate (PEGDA), respectively] which exhibit different frictional coefficients when sheared over a substrate. Hence the microgels self-orientate as they slide, and the side with the lower frictional coefficient positions in the direction of sliding. The self-oriented microgels concentrate at the bottom of the tilted plane. Here they form densely packed structures with translational as well as orientational order.

• MeSH
• akrylové pryskyřice chemie   MeSH
• mikrogely chemie   MeSH
• molekulární struktura MeSH
• polyethylenglykoly chemie   MeSH
• testování materiálů MeSH
• tření * MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH
• Názvy látek
• akrylové pryskyřice MeSH
• mikrogely MeSH
• poly-N-isopropylacrylamide MeSH Prohlížeč
• poly(ethylene glycol)diacrylate MeSH Prohlížeč
• polyethylenglykoly MeSH

The behavior of thermoresponsive polymer poly(N-isopropylacrylamide) (PNiPAM), an essential building block in the design of smart soft materials, in aqueous solutions has attracted much interest, which contrasts with our knowledge of N-isopropylacrylamide (NiPAM) monomer. Strikingly, the physicochemical properties of aqueous NiPAM are similarly rich, and their understanding is far from being complete. This stems from the lack of accurate thermodynamic data and quantitative model for atomistic simulations. In this joint study, we have probed the thermodynamic behavior of aqueous NiPAM by experimental methods, molecular dynamics (MD) simulations, and Kirkwood-Buff (KB) analysis at ambient conditions. From the partial molar volumes and simultaneously correlated osmotic coefficients, with excess partial molar enthalpies of NiPAM in water, the concentration and temperature dependence of KB integrals was determined. For the purpose of this work, we have developed and employed a novel NiPAM force field, which not only reproduces KB integrals (Gij) and adequately captures macroscopic thermodynamic quantities but also provides more accurate structural insight than the original force fields. We revealed in the vicinity of NiPAM the competing effect of amide hydration with interaction between nonpolar regions. This microscopic picture is reflected in the experimentally observed NiPAM-NiPAM association, which is present from highly dilute conditions up to the solubility limit and is evidenced by G22. From intermediate concentrations, it is accompanied by the existence of apparent dense-water regions, as indicated by positive G11 values. The here-employed KB-based framework provided a mutually consistent thermodynamic and microscopic insight into the NiPAM solution and may be further extended for ion-specific effects. Moreover, our findings contribute to the understanding of thermodynamic grounds behind PNiPAM collapse transition.

• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

The adsorption behavior of proteins on thermo-responsible resins based on poly(N-isopropylacrylamide) and its copolymer containing an anionic co-monomer has been investigated. The influence of the polymer composition, i.e., the content of the co-monomer and crosslinker on the thermo-sensitivity of the protein adsorption has been quantified. The properties of ungrafted polymer as well grafted onto the agarose matrix have been analyzed and compared. Batch and dynamic (column) experiments have been performed to measure the adsorption equilibrium of proteins and to quantify the phase transition process. As model proteins lysozyme, lactoferrin, α-chymotrypsinogen A and ovalbumin have been used. The adsorption process was found to be governed by ionic interactions between the negatively charged surface of resin and the protein, which enabled separation of proteins differing in electrostatic charge. The interactions enhanced with increase of temperature. Decrease of temperature facilitated desorption of proteins and reduced the salt usage in the desorption buffer. Grafted polymers exhibited markedly higher mechanical stability and, however, weaker temperature response compared to the ungrafted ones.

• Klíčová slova
• Bioseparations, N-Isopropylacrylamide, Thermo-responsible resins,
• MeSH
• adsorpce MeSH
• akrylové pryskyřice chemie   MeSH
• kur domácí MeSH
• poréznost MeSH
• proteiny chemie   MeSH
• skot MeSH
• spektroskopie infračervená s Fourierovou transformací MeSH
• teplota MeSH
• vysokoúčinná kapalinová chromatografie MeSH
• změna skupenství MeSH
• zvířata MeSH
• Check Tag
• skot MeSH
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH
• Názvy látek
• akrylové pryskyřice MeSH
• poly-N-isopropylacrylamide MeSH Prohlížeč
• proteiny MeSH

The phase separation and its thermohysteresis in dilute aqueous solutions of polymeric components of potential drug release systems (homopolymers and copolymers of N-isopropylacrylamide, N-isopropylmethacrylamide, N-propylmethacrylamide, N-sec-butylmethacrylamide, and N-(2-hydroxypropyl)methacrylamide) was studied, both on heating and cooling. Plots of light transmittance vs temperature were constructed and the parameters characterizing them were correlated with polymer structures. Qualitative information was obtained on the rate of formation of the concentrated phase on heating and its disappearance on cooling. Attention has been drawn to the improper identification of the cloud-point temperature, measured at an arbitrary concentration, with the lower critical solution temperature (LCST) as is frequently found in papers dealing with biomedical applications of thermosensitive polymers.

• MeSH
• akrylamidy chemie   MeSH
• akrylové pryskyřice chemie   MeSH
• kostní cementy chemie   MeSH
• methakryláty chemie   MeSH
• molekulová hmotnost MeSH
• nízká teplota MeSH
• nosiče léků chemie   MeSH
• polymery chemie   MeSH
• vysoká teplota MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH
• Názvy látek
• akrylamidy MeSH
• akrylové pryskyřice MeSH
• hydroxypropyl methacrylate MeSH Prohlížeč
• kostní cementy MeSH
• methakryláty MeSH
• nosiče léků MeSH
• poly-N-isopropylacrylamide MeSH Prohlížeč
• polymery MeSH