The contemporary way of living brings about increasing demands on materials used in our everyday lives [...].

Faculty of Mechanical Engineering VŠB Technical University of Ostrava 70800 Ostrava Czech Republic

Institute of Physics of Materials Czech Academy of Sciences 61662 Brno Czech Republic

Zobrazit více v PubMed

Špirk S., Špička J., Vychytil J., Křížek M., Stehlík A. Utilization of the Validated Windshield Material Model in Simulation of Tram to Pedestrian Collision. Materials. 2021;14:265. doi: 10.3390/ma14020265. PubMed DOI PMC

Kocich R., Greger M., Macháčková A. Finite element investigation of influence of selected factors on ECAP process; Proceedings of the Metal 2010; Rožnov pod Radhoštěm, Czech Republic. 18–20 May 2010; pp. 166–171.

Kořínek M., Halama R., Fojtík F., Pagáč M., Krček J., Krzikalla D., Kocich R., Kunčická L. Monotonic Tension-Torsion Experiments and FE Modeling on Notched Specimens Produced by SLM Technology from SS316L. Materials. 2021;14:33. doi: 10.3390/ma14010033. PubMed DOI PMC

Kocich R., Kunčická L., Davis C.F., Lowe T.C., Szurman I., Macháčková A. Deformation behavior of multilayered Al-Cu clad composite during cold-swaging. Mater. Des. 2016;90:379–388. doi: 10.1016/j.matdes.2015.10.145. DOI

Kunčická L., Kocich R., Drápala J., Andreyachshenko V. FEM simulations and comparison of the ecap and ECAP-PBP influence on Ti6Al4V alloy’s deformation behaviour; Proceedings of the Metal 2013; Brno, Czech Republic. 15–17 May 2013; pp. 391–396.

Marsalek P., Sotola M., Rybansky D., Repa V., Halama R., Fusek M., Prokop J. Modeling and Testing of Flexible Structures with Selected Planar Patterns Used in Biomedical Applications. Materials. 2021;14:140. doi: 10.3390/ma14010140. PubMed DOI PMC

Zach L., Kunčická L., Růžička P., Kocich R. Design, analysis and verification of a knee joint oncological prosthesis finite element model. Comput. Biol. Med. 2014;54:53–60. doi: 10.1016/j.compbiomed.2014.08.021. PubMed DOI

Kocich R. Design and optimization of induction heating for tungsten heavy alloy prior to rotary swaging. Int. J. Refract. Met. Hard Mater. 2020;93:105353. doi: 10.1016/j.ijrmhm.2020.105353. DOI

Macháčková A., Kocich R., Bojko M., Kunčická L., Polko K. Numerical and experimental investigation of flue gases heat recovery via condensing heat exchanger. Int. J. Heat Mass Transf. 2018;124:1321–1333. doi: 10.1016/j.ijheatmasstransfer.2018.04.051. DOI

Čapek J., Trojan K., Kec J., Černý I., Ganev N., Němeček S. On the Weldability of Thick P355NL1 Pressure Vessel Steel Plates Using Laser Welding. Materials. 2021;14:131. doi: 10.3390/ma14010131. PubMed DOI PMC

Kunčická L., Kocich R., Král P., Pohludka M., Marek M. Effect of strain path on severely deformed aluminium. Mater. Lett. 2016;180:280–283. doi: 10.1016/j.matlet.2016.05.163. DOI

Kunčická L., Kocich R., Strunz P., Macháčková A. Texture and residual stress within rotary swaged Cu/Al clad composites. Mater. Lett. 2018;230:88–91. doi: 10.1016/j.matlet.2018.07.085. DOI

Kostroun T., Dvořák M. Application of the Pulse Infrared Thermography Method for Nondestructive Evaluation of Composite Aircraft Adhesive Joints. Materials. 2021;14:533. doi: 10.3390/ma14030533. PubMed DOI PMC

Hron R., Kadlec M., Růžek R. Effect of the Test Procedure and Thermoplastic Composite Resin Type on the Curved Beam Strength. Materials. 2021;14:352. doi: 10.3390/ma14020352. PubMed DOI PMC

Thomasová M., Seiner H., Sedlák P., Frost M., Ševčík M., Szurman I., Kocich R., Drahokoupil J., Šittner P., Landa M. Evolution of macroscopic elastic moduli of martensitic polycrystalline NiTi and NiTiCu shape memory alloys with pseudoplastic straining. Acta Mater. 2017;123:146–156. doi: 10.1016/j.actamat.2016.10.024. DOI

Khalaj O., Jirková H., Burdová K., Stehlík A., Kučerová L., Vrtáček J., Svoboda J. Hot Rolling vs. Forging: Newly Developed Fe-Al-O Based OPH Alloy. Metals. 2021;11:228. doi: 10.3390/met11020228. DOI

Kunčická L., Kocich R. IOP Conference Series: Materials Science and Engineering. Volume 369. IOP publishing; Bristol, UK: 2018. Deformation behaviour of Cu-Al clad composites produced by rotary swaging; p. 012029.

Kocich R., Kunčická L., Král P., Macháčková A. Sub-structure and mechanical properties of twist channel angular pressed aluminium. Mater. Charact. 2016;119:75–83. doi: 10.1016/j.matchar.2016.07.020. DOI

Pástor M., Hagara M., Virgala I., Kal’avský A., Sapietová A., Hagarová L. Design of a Unique Device for Residual Stresses Quantification by the Drilling Method Combining the PhotoStress and Digital Image Correlation. Materials. 2021;14:314. doi: 10.3390/ma14020314. PubMed DOI PMC

Šofer M., Cienciala J., Fusek M., Pavlíček P., Moravec R. Damage Analysis of Composite CFRP Tubes Using Acoustic Emission Monitoring and Pattern Recognition Approach. Materials. 2021;14:786. doi: 10.3390/ma14040786. PubMed DOI PMC

Wang Z., Chen J., Besnard C., Kunčická L., Kocich R., Korsunsky A.M. In situ neutron diffraction investigation of texture-dependent Shape Memory Effect in a near equiatomic NiTi alloy. Acta Mater. 2021;202:135–148. doi: 10.1016/j.actamat.2020.10.049. DOI

Mikula P., Ryukhtin V., Šaroun J., Strunz P. High-Resolution Strain/Stress Measurements by Three-Axis Neutron Diffractometer. Materials. 2020;13:5449. doi: 10.3390/ma13235449. PubMed DOI PMC