This study focuses on an applicability of the device designed for monitoring dough fermentation. The device combines a complex system of thermodynamic sensors (TDSs) with an electronic nose (E-nose). The device's behavior was tested in experiments with dough samples. The configuration of the sensors in the thermodynamic system was explored and their response to various positions of the heat source was investigated. When the distance of the heat source and its intensity from two thermodynamic sensors changes, the output signal of the thermodynamic system changes as well. Thus, as the distance of the heat source decreases or the intensity increases, there is a higher change in the output signal of the system. The linear trend of this change reaches an R2 value of 0.936. Characteristics of the doughs prepared from traditional and non-traditional flours were successfully detected using the electronic nose. To validate findings, the results of the measurements were compared with signals from the rheofermentometer Rheo F4, and the correlation between the output signals was closely monitored. The data after statistical evaluation show that the measurements using thermodynamic sensors and electronic nose directly correlate the most with the measured values of the fermenting dough volume. Pearson's correlation coefficient for TDSs and rheofermentometer reaches up to 0.932. The E-nose signals also correlate well with dough volume development, up to 0.973. The data and their analysis provided by this study declare that the used system configuration and methods are fully usable for this type of food analysis and also could be usable in other types of food based on the controlled fermentation. The system configuration, based on the result, will be also used in future studies.

• Klíčová slova
• dough fermentation, electronic nose, mealworm flour, monitoring, rheofermentometer, rice flour, thermodynamic sensors,
• Publikační typ
• časopisecké články MeSH

Dough fermentation in gluten-free bakery products is problematic due to the absence of gluten, which provides advantageous rheological properties. A thermodynamic sensor (TDS) system combined with an electronic nose was tested as an alternative to conventional methods monitoring dough development based on mechanical properties. In the first part, the configuration of the sensors in the thermodynamic system and their response to different heat-source positions, which significantly affect the output signal from the measurement system, were investigated. The practical contribution lies in the application of the measurements to the example of gluten-free doughs with and without edible insect enrichment. An optimized configuration of the thermodynamic system (one sensor on the inner wall of the container at the bottom and another in the middle of the container closer to the top of the dough) in combination with an experimental electronic nose was used for the aforementioned measurement. In some cases, up to 87% correlation between the signal from the TDS and the signals from a professional rheofermentometer Rheo F-4 (Chopin) was demonstrated. The differences between the results can be explained by the use of different techniques. Using a combination of sensor systems in one place, one time and one sample can lead to more comprehensive and robust results. Furthermore, it was shown that the fermentation activity increased in corn dough with the addition of insects compared to dough without the addition. In rice flour dough with the addition of edible insects, fermentation activity was similar to that of the flour without the addition.

• Klíčová slova
• dough, e-nose, edible insects, fermentation, gluten-free, optimization, rheofermentometer, the dough development, the production of gas, thermodynamic sensor,
• MeSH
• bezlepková dieta * MeSH
• fermentace MeSH
• mouka * MeSH
• reologie MeSH
• termodynamika MeSH
• Publikační typ
• časopisecké články MeSH

This study focuses on the use of thermodynamic sensors (TDS) in baking, brewing, and yogurt production at home. Using thermodynamic sensors, a change in the temperature flow between the two sensor elements during fermentation was observed for the final mixture (complete recipe for pizza dough production), showing the possibility of distinguishing some phases of the fermentation process. Even during the fermentation process in the preparation of wort and yogurt with non-traditional additives, the sensors were able to indicate significant parts of the process, including the end of the process. The research article also mentions as a new idea the use of trivial regulation at home in food production to determine the course of the fermentation process. The results presented in this article show the possibility of using TDS for more accurate characterization and adjustment of the production process of selected foods in the basic phase, which will be further applicable in the food industry, with the potential to reduce the cost of food production processes that involve a fermentation process.

• Klíčová slova
• fermentation, thermodynamic sensors, yeast,
• MeSH
• fermentace MeSH
• jogurt * MeSH
• manipulace s potravinami * MeSH
• teplota MeSH
• termodynamika MeSH
• Publikační typ
• časopisecké články MeSH