Adhesion and proliferation of cultured human aortic smooth muscle cells on polystyrene implanted with N+, F+ and Ar+ ions: correlation with polymer surface polarity and carbonization
Jazyk angličtina Země Nizozemsko Médium print
Typ dokumentu časopisecké články, práce podpořená grantem
PubMed
8718973
DOI
10.1016/0142-9612(96)85914-x
PII: 014296129685914X
Knihovny.cz E-zdroje
- MeSH
- argon chemie MeSH
- buněčná adheze fyziologie MeSH
- buněčné dělení fyziologie MeSH
- chemické jevy MeSH
- chemie fyzikální MeSH
- dusík chemie MeSH
- fluor chemie MeSH
- kationty chemie MeSH
- kultivované buňky MeSH
- kyslík chemie MeSH
- lidé MeSH
- oxidace-redukce MeSH
- polystyreny chemie MeSH
- povrchové vlastnosti MeSH
- spektrofotometrie ultrafialová MeSH
- svaly hladké cévní cytologie MeSH
- uhlík chemie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
- Názvy látek
- argon MeSH
- dusík MeSH
- fluor MeSH
- kationty MeSH
- kyslík MeSH
- polystyreny MeSH
- uhlík MeSH
Physicochemical surface properties and biocompatibility were studied in polystyrene (PS) implanted with 150 keV N+, F+ and Ar+ at doses ranging from 1 x 10(12) to 1 x 10(15) cm-2. Adhesion and proliferation of cultured human aortic smooth muscle cells (SMCs) on ion implanted PS were thoroughly examined for dependence on implanted dose and ion species and in close relation to polymer surface oxidation, surface polarity, concentration of conjugated double bonds and sheet resistivity. The surface polarity of PS was a smooth, increasing function of the implanted dose. However, the dependence of SMC population density on the implanted dose was found to be more complicated. After 18 h cultivation time (i.e. when only cell attachment and spreading took place), the number of adhered SMCs and their degree of spreading first increased with increasing ion dose, and after reaching a maximum at the dose of 5 x 10(12) cm-2, they decreased to original values. For doses above 5 x 10(14) cm-2, an increase in SMC population density and spreading was again observed. The first maximum in cell adhesion can be explained by slight increases in the surface polarity and wettability, optimal for cell adhesion, and the second maximum by progressive carbonization of the PS surface. After 96 h cultivation time (i.e. when the cells proliferated intensively), the dramatic dependence of the SMC population density on implanted dose is mostly smeared out. This observed dependence of SMC attachment, spreading and subsequent proliferation on the implanted dose was similar in all three ion species, but highest cell densities were achieved on PS implanted with F+ ions.
Citace poskytuje Crossref.org
Surface Modification of Polymer Substrates for Biomedical Applications
Adhesion and proliferation of keratinocytes on ion beam modified polyethylene
