The precise experimental estimation of mechanical properties of rubber blends can be a very costly and time-consuming process. The present work explores the possibilities of increasing its efficiency by using artificial neural networks to study the mechanical behavior of these widely used materials. A multilayer feed-forward back-propagation artificial neural network model, with a strain and the carbon black content as input parameters and stress as an output parameter, has been developed to predict the uniaxial tensile response of vulcanized natural rubber blends with different contents of carbon black in the form of engineering stress-strain curves. A novel procedure has been created for the simulation of the optimized artificial neural network model with input datasets generated by a regression model of an experimental dependence of tensile strain-at-break on the carbon black content in the investigated blends. Errors of the prediction of experimental stress-strain curves, as well as of tensile strain-at-break, tensile stress-at-break and M100 tensile modulus were estimated for all simulated stress-strain curves. The present study demonstrated that the performance of a developed neural network model to predict the stress-strain curves of rubber blends with different contents of carbon black is also exceptionally high in the case of a network that had never learned the input data, which makes it a suitable tool for extensive use in practice.

Department of Mechanical Engineering Faculty of Technology Institute of Technology and Business in České Budějovice Okružní 10 370 01 České Budějovice Czech Republic

Faculty of Engineering Slovak University of Agriculture in Nitra Trieda Andreja Hlinku 609 2 949 76 Nitra Slovakia

Faculty of Industrial Technologies in Púchov Alexander Dubček University of Trenčín Ivana Krasku 491 30 020 01 Púchov Slovakia

Zobrazit více v PubMed

Krmela J. Tire Casings and Their Material Characteristics for Computational Modelling. 1st ed. Printing House the Managers of Quality and Production Association; Czestochowa, Poland: 2017.

Ward I.M., Sweeney J. Mechanical Properties of Solid Polymers. 3rd ed. Wiley; Chichester, UK: 2013.

Drobny G.J. Handbook of Thermoplastic Elastomers. 2nd ed. Elsevier; Amsterdam, The Netherlands: 2014.

Pandian J.J., Govindan T. Comparative Studies on the Mechanical Properties of Natural Rubber and Natural Rubber Carbon Black Composites. IJETCSE. 2015;13:48–52.

Vineetkumat J. Carbon Black Filler Reinforcement of Elastomers. Queen Mary University of London; London, UK: 2008.

Rothert H., Kaliske M. Constitutive approach to rate-independent properties of filled elastomers. Int. J. Solids Struct. 1998;35:2057–2071.

Kucherskii A.M. Hysteresis losses in carbon-black-filled rubbers under small and large elongations. Polym. Test. 2005;24:733–738. doi: 10.1016/j.polymertesting.2005.04.005. DOI

Tomita Y., Azuma K., Naito M. Strain-rate-dependent deformation behavior of carbon-black-filled rubber under monotonic and cyclic straining. Int. J. Mech. Sci. 2008;340:856–868. doi: 10.1016/j.ijmecsci.2007.09.010. DOI

Xiang K.L., Xiang P.Y., Wu Y.P. Prediction of the fatigue life of natural rubber composites by artificial neural network approaches. Mater. Des. 2014;57:180–185. doi: 10.1016/j.matdes.2013.12.044. DOI

Kamal M.M., Clarke J., Ahmad M.A. Comparison of properties of natural rubber compounds with various fillers. J. Rubber Res. 2009;12:27–44.

Jha V., Hon A.A., Thomas A.G, Busfield T.J. Modelling of the effect of on the stiffness of rubbers. J. Appl. Polym. Sci. 2007;107:2572–2577. doi: 10.1002/app.27324. DOI

Gil-Negrete N., Alonso A. Constitutive Models for Rubber VIII. CRC Press; Boca Raton, FL, USA: 2013.

Boyce M.C., Arruda E.M. Constitutive models of rubber elasticity: A review. Rubber Chem. Technol. 2000;73:504–523. doi: 10.5254/1.3547602. DOI

El Kadi H. Modeling the mechanical behavior of fiber-reinforced polymeric composite materials using artificial neural networks—A review. Compos. Struct. 2006;73:1–23. doi: 10.1016/j.compstruct.2005.01.020. DOI

Lion A. A constitutive model for carbon black filled rubber: Experimental investigations and mathematical representation. Contin. Mech. Thermdyn. 1996;8:153–169. doi: 10.1007/BF01181853. DOI

Bergstorm J.S., Boyce M.C. Constitutive modelling of the large strain time dependemt behaviour of elastomers. J. Mech. Phys. Solids. 1998;46:931–954. doi: 10.1016/S0022-5096(97)00075-6. DOI

Guo Z., Sluys L.J. Constitutive modelling of hyperelastic rubber-like materials. Heron. 2008;43:109–132.

Zéhil G.P., Gavin H.P. Unified constitutive modeling of rubber-like materials under diverse loading conditions. Int. J. Eng. Sci. 2016;62:90–105. doi: 10.1016/j.ijengsci.2012.09.002. DOI

Ali A., Hosseini M., Sahari B.B. A Review of Constitutive Models for Rubber-Like Materials. Am. J. Eng. Appl. Sci. 2010;3:232–239. doi: 10.3844/ajeassp.2010.232.239. DOI

Dargazany R., Itskov M. A network evolution model for the anisotropic mullins effect in carbon black filled rubbers. Int. J. Solids Struct. 2009;46:2967–2977. doi: 10.1016/j.ijsolstr.2009.03.022. DOI

Liang G., Chandrashekhara K. Neural network based constitutive model for elastomeric foams. Eng. Struct. 2008;39:2002–2011. doi: 10.1016/j.engstruct.2007.12.021. DOI

Fausett N. Fundamentals of Neural Networks: Architectures, Algorithms and Applications. Prentice Hall; Upper Saddle River, NJ, USA: 1993.

Aliev R., Bonfig K., Aliew F. Soft Computing. Verlag Technic; Berlin, Germany: 2000.

Shanmuganathan S., Samarasinghe S. Artificial Neural Network Modelling. Springer; Berlin, Germany: 2016.

David J., Sally L. Advances in Computer Science, Intelligent System and Environment. Springer; Berlin, Germany: 2011.

Du K.L., Swamy M.N.S. Neural Networks and Statistical Learning. Springer; New York, NY, USA: 2013.

Auer P., Burgsteiner H., Maass W.A. A learning rule for very simple universal approximators consisting of a single layer of perceptrons. Neural Netw. 2008;21:786–795. doi: 10.1016/j.neunet.2007.12.036. PubMed DOI

Kotsiantis S.B. Supervised Machine Learning: A Review of Classification Techniques. Informatica. 2007;31:249–268.

Hagan M.T., Menhaj M. Training feed-forward networks with the Marquardt algorithm. IEEE Trans. Neural Netw. 1994;5:989–999. doi: 10.1109/72.329697. PubMed DOI

Mohri M., Rostamizadeh A., Talwalkar A. Foundations of Machine Learning. MIT Press; Cambridge, MA, USA: 2012.

Zhang Z., Friedrich K. Artificial neural networks applied to polymer composites: A review. Compos. Sci. Technol. 2003;63:2029–2044. doi: 10.1016/S0266-3538(03)00106-4. DOI

Freeman J.A., Skapura D.M. Neural Networks: Algorithms, Applications, and Programming Techniques. Addison-Wesley; Reading, MA, USA: 1991.

Lagaros N.D., Papadrakikis M. Learning improvement of neural networks used in structural optimization. Adv. Eng. Softw. 2004;35:9–25. doi: 10.1016/S0965-9978(03)00112-1. DOI

Rutkowski L. New Soft Computing Techniques for System Modeling, Pattern Classification and Image Processing. Studies in Fuzziness and Soft Computing. 1st ed. Volume 143. Springer; Berlin/Heidelberg, Germany: 2004. Generalized regression neural networks in time-varying environment; pp. 73–134.

Demirhan E., Kandemirli F., Kandemirli M., Kovalishyn V. Investigation of the physical and rheological properties of SBR-1712 rubber compounds by neural network approaches. Mater. Des. 2007;28:1737–1741. doi: 10.1016/j.matdes.2006.02.005. DOI

Kopal I., Harničárová M., Valíček J., Kušnerová M. Modelling the temperature dependence of dynamic mechanical properties and visco-elastic behavior of thermoplastic polyurethane using artificial neural network. Polymers. 2017;9:519. doi: 10.3390/polym9100519. PubMed DOI PMC

Fernandez-Martinez R., Hernandez R., Ibarretxe J., Jimbert P., Iturrondobeitia M., Guraya-Díez T. Modeling of the Mechanical Properties of Carbon Black Reinforced Rubber Blends by Machine Learning Techniques. Appl. Mech. Mater. 2014;627:97–100. doi: 10.4028/www.scientific.net/AMM.627.97. DOI

Wang B., Ma J.H., Wu J.P. Application of artificial neural network in prediction of abrasion of rubber composites. Mater. Des. 2013;49:802–807. doi: 10.1016/j.matdes.2013.01.047. DOI

Ružiak I., Koštial P., Jančíková Z., Gajtanska M., Krišťák Ľ., Kopal I., Polakovič P. Artificial Neural Networks Prediction of Rubber Mechanical Properties in Aged and Nonaged State. In: Öchsner A., Altenbach H., editors. Improved Performance of Materials. Volume 72. Springer; Berlin, Germany: 2018. pp. 27–35.

Karaağaç B., Inal M., Deniz V. Artificial neural network approach for predicting optimum cure time of rubber compounds. Mater. Des. 2009;30:1685–1690. doi: 10.1016/j.matdes.2008.07.010. DOI

Yang X., Behroozi M., Olatunbosun O.A. A Neural Network Approach to Predicting Car Tyre Micro-Scale and Macro-Scale Behaviour. J. Intell. Learn. Syst. Appl. 2014;6:11–20. doi: 10.4236/jilsa.2014.61002. DOI

Trebar M., Susteric Z., Lotric U. Predicting mechanical properties of elastomers with neural networks. Polymer. 2007;48:5340–5347. doi: 10.1016/j.polymer.2007.07.030. DOI

Zhang Z., Klein P., Friedrich K. Dynamic mechanical properties of PTFE based short carbon fibre reinforced composites: Experiment and artificial neural network prediction. Compos. Sci. Technol. 2002;62:1001–1009. doi: 10.1016/S0266-3538(02)00036-2. DOI

Nematollahi M., Jalali-Arani A., Golzar K. Organoclay maleated natural rubber nanocomposite. Prediction of abrasion and mechanical properties by artificial neural network and adaptive neuro-fuzzy inference. Appl. Clay Sci. 2014;97–98:187–199. doi: 10.1016/j.clay.2014.05.027. DOI

Beale M.H., Hagan M.T., Demuth H.B. Neural Network Toolbox™ User’s Guide. The MathWorks, Inc.; Natick, MA, USA: 2017.

Bowden G.J., Maier H.R., Dandy G.C. Optimal division of data for neural network models in water resources applications. Water Resour. Res. 2002;38:2-1–2-11. doi: 10.1029/2001WR000266. DOI

Bennett Ch., Stewart R.A., Beal C.D. ANN-based residential water end-use demand forecasting model. Expert Syst. Appl. 2013;40:1014–1023. doi: 10.1016/j.eswa.2012.08.012. DOI

Wackerly D.D., Mendenhall W., Scheaffer L.R. Mathematical Statistics with Applications. 7th ed. Thomson Brooks/Cole; Belmont, CA, USA: 2008.

Zhang T., Yu B. Boosting with Early Stopping: Convergence and Consistency. Ann. Stat. 2005;33:1538–1579. doi: 10.1214/009053605000000255. DOI

Sifaoui A., Abdelkrim A., Benrejeb M. On the Use of Neural Network as a Universal Approximator. Int. J. Sci. Tech. Control Comput. Eng. 2008;2:386–399.

Croeze A., Pittman L., Reynolds W. Nonlinear Least-Squares Problems with the Gauss-Newton and Levenberg-Marquardt Methods. University of Mississippi; Oxford, UK: 2012.

Menczel D.J., Prime B.R. Thermal Analysis of Polymers. John Wiley; Hoboken, NJ, USA: 2009.

Simon L. An Introduction to Multivariable Mathematics. Morgan & Claypool; St. Louis, CA, USA: 2008.

Shi F., Wang X.C., Yu L., Li Y. MATLAB 30 Case Analysis of MATLAB Neural Network. Beijing University Press; Beijing, China: 2009.

Ward I.M., Sweeney J. An Introduction to the Mechanical Properties of Solid Polymers. 2nd ed. Wiley; Chichester, UK: 2004.

Paliwal M., Kumar U.A. Neural networks and statistical techniques: A review of applications. Expert Syst. Appl. 2009;36:2–17. doi: 10.1016/j.eswa.2007.10.005. DOI

Bessa M.A., Bostanabad R., Liu Z., Hu A., Apley D.W., Brinson C., Chen W., Liu W.K. A framework for data-driven analysis of materials under uncertainty: Countering the curse of dimensionality. Comput. Methods Appl. Mech. Eng. 2017;320:633–667. doi: 10.1016/j.cma.2017.03.037. DOI

Basem F.J., Mourada A.I., Alnaqbia A.H. Prediction of the Mechanical Properties of PE/PP Blends Using Artificial Neural Networks. Procedia Eng. 2011;10:2713–2718.

Zhang Y., Ge S., Tang B., Koga T., Rafailovich M., Sokolov J., Peiffer D.G., Li Z., Dias A.J., McElrath K.O., et al. Effect of carbon black and silica fillers in elastomer blends. Macromolecules. 2001;34:7056–7065. doi: 10.1021/ma010183p. DOI

Le B.A., Yvonnet J., He Q.C. Computational homogenization of nonlinear elastic materials using neural networks. Int. J. Numer. Meth. Eng. 2015;104:1061–1084. doi: 10.1002/nme.4953. DOI

A Generalized Regression Neural Network Model for Predicting the Curing Characteristics of Carbon Black-Filled Rubber Blends

Radial Basis Function Neural Network-Based Modeling of the Dynamic Thermo-Mechanical Response and Damping Behavior of Thermoplastic Elastomer Systems