Cardiovascular disease is one of the leading causes of death and serious illness in Europe and worldwide. Conventional treatment-replacing the damaged blood vessel with an autologous graft-is not always affordable for the patient, so alternative approaches are being sought. One such approach is patient-specific tissue bioprinting, which allows for precise distribution of cells, material, and biochemical signals. With further developmental support, a functional replacement tissue or vessel can be created. This review provides an overview of the current state of bioprinting for vascular graft manufacturing and summarizes the hydrogels used as bioinks, the material of carriers, and the current methods of fabrication used, especially for vessels smaller than 6 mm, which are the most challenging for cardiovascular replacements. The fabrication methods are divided into several sections-self-supporting grafts based on simple 3D bioprinting and bioprinting of bioinks on scaffolds made of decellularized or nanofibrous material.
- Publikační typ
- časopisecké články MeSH
- přehledy MeSH
BACKGROUND: In recent years, there has been an increasing effort to take advantage of the potential use of low magnetic induction devices with less than 1 T, referred to as Low-Field MRI (LF MRI). LF MRI systems were used, especially in the early days of magnetic resonance technology. Over time, magnetic induction values of 1.5 and 3 T have become the standard for clinical devices, mainly because LF MRI systems were suffering from significantly lower quality of the images, e.g., signal-noise ratio. In recent years, due to advances in image processing with artificial intelligence, there has been an increasing effort to take advantage of the potential use of LF MRI with induction of less than 1 T. This overview article focuses on the analysis of the evidence concerning the diagnostic efficacy of modern LF MRI systems and the clinical comparison of LF MRI with 1.5 T systems in imaging the nervous system, musculoskeletal system, and organs of the chest, abdomen, and pelvis. METHODOLOGY: A systematic literature review of MEDLINE, PubMed, Scopus, Web of Science, and CENTRAL databases for the period 2018-2023 was performed according to the recommended PRISMA protocol. Data were analysed to identify studies comparing the accuracy, reliability and diagnostic performance of LF MRI technology compared to available 1.5 T MRI. RESULTS: A total of 1275 publications were retrieved from the selected databases. Only two articles meeting all predefined inclusion criteria were selected for detailed assessment. CONCLUSIONS: A limited number of robust studies on the accuracy and diagnostic performance of LF MRI compared with 1.5 T MRI was available. The current evidence is not sufficient to draw any definitive insights. More scientific research is needed to make informed conclusions regarding the effectiveness of LF MRI technology.
- Publikační typ
- časopisecké články MeSH
- přehledy MeSH
Managed Entry Agreements (MEAs) play a pivotal role in addressing the challenges arising from escalating prices of innovative medical technologies, especially in areas like oncology, immunology, and rare diseases. Among MEAs, Performance-Based MEAs (PB MEAs) and Outcome-Based MEAs (OB MEAs) stand out as innovative strategies. This study examines the adoption of PB MEAs in the Czech Republic post a 2022 legislative change. Interviews with key stakeholders, including the Ministry of Health, pharmaceutical companies, insurers, and patient groups, were conducted to explore perceptions and challenges. Stakeholders expressed concerns about legislation completeness, data quality, transparency, and methodology. Interestingly, pharmaceutical companies were less concerned about transparency and methodology, likely due to their multinational experience. Despite legislative progress, challenges persist, especially in data infrastructure, risk-sharing perceptions, and stakeholder readiness. Addressing these issues requires collaboration between pharmaceutical companies and payers. Patient involvement, though mandated, remains limited, potentially due to a lack of awareness. This study emphasizes the need for a comprehensive transformation beyond legislation for a successful PB MEA implementation. Trust, technical infrastructure, and data availability are crucial, necessitating a holistic approach. It contributes to the global discourse on PB MEAs, stressing the adjustment of financial frameworks, embracing value-based healthcare principles, and ensuring high-quality health data metrics. A more holistic, value-based MEA approach could reshape pharmaceutical reimbursement in the future.
- Publikační typ
- časopisecké články MeSH
The extreme toxicity of nerve agents and the broad spectrum of their physical and chemical properties, enabling the use of these agents in a variety of tactical situations, is a continuing challenge in maintaining the knowledge and capability to detect them, as well as in finding new effective methods. Despite significant advances in the instrumentation of the analysis of nerve agents, relatively simple methods based on the evaluation of colour signals (absorption and fluorescence), in particular those using the cholinesterase reaction, continue to be of importance. This review provides a brief presentation of the current status of these simple methods, with an emphasis on military applications, and illustrates the high interest of the professional community in their further development. At the same time, it also contains some peculiarities (high reliability and durability, resistance to extreme climatic conditions, work in deployed means of protection, low purchase prices, economic availability especially in a state of war, etc.) that the authors believe research and development of simple methods and means for the detection of nerve agents should respect.
- MeSH
- cholinesterasy MeSH
- nervová bojová látka * analýza MeSH
- reprodukovatelnost výsledků MeSH
- Publikační typ
- časopisecké články MeSH
- přehledy MeSH
Although smartwatches are not considered medical devices, experimental validation of their accuracy in detecting hypoxemia is necessary due to their potential use in monitoring conditions manifested by a prolonged decrease in peripheral blood oxygen saturation (SpO2), such as chronic obstructive pulmonary disease, sleep apnea syndrome, and COVID-19, or at high altitudes, e.g., during sport climbing, where the use of finger-sensor-based pulse oximeters may be limited. The aim of this study was to experimentally compare the accuracy of SpO2 measurement of popular smartwatches with a clinically used pulse oximeter according to the requirements of ISO 80601-2-61. Each of the 18 young and healthy participants underwent the experimental assessment three times in randomized order-wearing Apple Watch 8, Samsung Galaxy Watch 5, or Withings ScanWatch-resulting in 54 individual experimental assessments and complete datasets. The accuracy of the SpO2 measurements was compared to that of the Radical-7 (Masimo Corporation, Irvine, CA, USA) during short-term hypoxemia induced by consecutive inhalation of three prepared gas mixtures with reduced oxygen concentrations (14%, 12%, and 10%). All three smartwatch models met the maximum acceptable root-mean-square deviation (≤4%) from the reference measurement at both normal oxygen levels and induced desaturation with SpO2 less than 90%. Apple Watch 8 reached the highest reliability due to its lowest mean bias and root-mean-square deviation, highest Pearson correlation coefficient, and accuracy in detecting hypoxemia. Our findings support the use of smartwatches to reliably detect hypoxemia in situations where the use of standard finger pulse oximeters may be limited.
- MeSH
- chronická obstrukční plicní nemoc * MeSH
- hypoxie diagnóza MeSH
- kyslík MeSH
- lidé MeSH
- oxymetrie * metody MeSH
- reprodukovatelnost výsledků MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
Laparoscopic surgery with capnoperitoneum brings many advantages to patients, but also emphasizes the negative impact of anesthesia and mechanical ventilation on the lungs. Even though many studies use electrical impedance tomography (EIT) for lung monitoring during these surgeries, it is not clear what the best position of the electrode belt on the patient's thorax is, considering the cranial shift of the diaphragm. We monitored 16 patients undergoing a laparoscopic surgery with capnoperitoneum using EIT with two independent electrode belts at different tomographic levels: in the standard position of the 4th-6th intercostal space, as recommended by the manufacturer, and in a more cranial position at the level of the axilla. Functional residual capacity (FRC) was measured, and a recruitment maneuver was performed at the end of the procedure by raising the positive end-expiratory pressure (PEEP) by 5 cmH2O. The results based on the spectral analysis of the EIT signal show that the ventilation-related impedance changes are not detectable by the belt in the standard position. In general, the cranial belt position might be more suitable for the lung monitoring during the capnoperitoneum since the ventilation signal remains dominant in the obtained impedance waveform. FRC was significantly decreased by the capnoperitoneum and remained lower also after desufflation.
- MeSH
- elektrická impedance MeSH
- elektrody MeSH
- laparoskopie * MeSH
- lidé MeSH
- počítačová rentgenová tomografie * MeSH
- tomografie metody MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
The objective of this study was to compare the distribution of stress in the maxillary bone, dental implants, and prosthetic components supporting implant-supported maxillary overdentures with partial palatal coverage, in both splinted and unsplinted designs. Two models of maxillary overdentures were designed using the Exocad Dental CAD program, which included cancellous and cortical bone. The complete denture design and abutments (locator abutments in the unsplinted and Hader bar with Vertix attachments placed distally in the splinted variant) were also designed. The denture material was PEEK (Polyetheretherketone), and the method used to analyze patient-specific 3D X-ray scans was 3D QCT/FEA (three-dimensional quantitative computed tomography-based finite element analysis). Loading was divided into three load cases, in the frontal region (both incisors of the denture) and distal region (both molars and first premolar of the denture). The forces applied were 150 N with an oblique component with a buccal inclination of 35° in the frontal region, and 600 N with a buccal inclination of 5° (molars) or solely vertical (premolar) in the distal region. The model with locator abutments showed higher stresses in all load cases in both analyzed implant variants and in the maxilla. The differences in stress distribution between the splinted and unsplinted variants were more significant in the distal region. According to the results of the present study, the amount of stress in bone tissue and dental implant parts was smaller in the splinted, bar-retained variant. The findings of this study can be useful in selecting the appropriate prosthetic design for implant-supported maxillary overdentures with partial palatal coverage.
- Publikační typ
- časopisecké články MeSH
Microfabricated electroacoustic transducers with perforated moving plates used as microphones or acoustic sources have appeared in the literature in recent years. However, optimization of the parameters of such transducers for use in the audio frequency range requires high-precision theoretical modeling. The main objective of the paper is to provide such an analytical model of a miniature transducer with a moving electrode in the form of a perforated plate (rigid elastically supported or elastic clamped at all boundaries) loaded by an air gap surrounded by a small cavity. The formulation for the acoustic pressure field inside the air gap enables expression of the coupling of this field to the displacement field of the moving plate and to the incident acoustic pressure through the holes in the plate. The damping effects of the thermal and viscous boundary layers originating inside the air gap, the cavity, and the holes in the moving plate are also taken into account. The analytical results, namely, the acoustic pressure sensitivity of the transducer used as a microphone, are presented and compared to the numerical (FEM) results.
- Publikační typ
- časopisecké články MeSH
Slovakia has adopted an amendment to Act No. 363/2011, regulating, among other things, drug reimbursement and is undergoing a significant change in the availability of innovative treatments for patients. High expectations are associated with arrangements related to performance-based managed entry agreements. Opinions and positions towards this change appear to be inconsistent, and for the further application of the law in practice and when setting up the main implementation processes, it is necessary to understand the positions and opinions of the individual actors who are involved in the PB-MEA process. The interviews were conducted in the period from 20 May to 15 August 2022 around the same time as the finalisation of the amendment to Act No. 363/2011 and its adoption. A roughly one-hour open interview was conducted on a sample of 12 stakeholders in the following groups: representatives of the Ministry of Health, health-care providers, pharmaceutical companies and others, including a health insurance company. The main objective was to qualitatively describe the perception of this topic by key stakeholders in Slovakia. The responses were analysed using MAXQDATA 2022 software to obtain codes associated with key expressions. We identified three main strong top categories of expressions that strongly dominated the pro-management interviews with stakeholders: legislation, opportunities and threats. Ambiguity and insufficient coverage of the new law, improved availability of medicinal products and threats associated with data, IT systems and potentially unfavourable new reimbursement schemes were identified as key topics of each of the said top categories, respectively. Among individual sets of respondents, there is frequent consensus on both opportunities and threats in the area of implementing process changes in PB-MEA. For the successful implementation of the law in practice, some basic threats need to be removed, among which in particular is insufficient data infrastructure.
- Publikační typ
- časopisecké články MeSH
Targeted alpha therapy with radionuclides undergoing multiple alpha-particle decays is a promising method of nuclear medicine. To study the effectiveness of alpha versus beta emitters, survival of DU145 prostate cancer cells exposed to 223Ra or 177Lu was assessed. Per decay, the cells were much more sensitive to the alpha than beta emitter. However, per unit dose the sensitivities would be comparable, contrary to the well-known evidence, if the decay energy were deposited within the sample completely and homogeneously. Measurements by Timepix detectors showed about three times higher counts of alpha particles above than below the sample. After the first alpha decay of 223Ra to 219Rn, this gas likely moves upwards and its subsequent three alpha decays occur in the upper part of the sample. Correct estimation of absorbed dose is a critical issue when analysing in vitro data and when translating their results to clinical applications.
- MeSH
- alfa částice terapeutické užití MeSH
- lidé MeSH
- radiometrie metody MeSH
- radionuklidy terapeutické užití MeSH
- radium * MeSH
- Check Tag
- lidé MeSH
- mužské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
