Ultrathin electrospun poly (l-lactide-co-dl-lactide) nanofibrous membranes coated with fibronectin were explored as scaffolds for the ex vivo cultivation of limbal epithelial cells (LECs) for the treatment of limbal stem cell deficiency. The developed scaffolds were compared with the "gold-standard" fibrin gel. The resulting membranes composed of nanofibers possessed a very low thickness of 4 μm and allowed very good optical transparency in the wet state. The fibronectin-coated nanofibrous scaffolds demonstrated LEC expansion and successful cultivation similar to that on fibrin gel. Unlike the regular cobblestone epithelial cell morphology on the fibrin gel, the nanofibrous scaffold presented a mostly irregular epithelial morphology with a shift to a mesenchymal phenotype, as confirmed by the upregulation of profibroblastic genes: ACTA2 (p = 0.023), FBLN1 (p < 0.001), and THY1 (p < 0.001). Both culture conditions revealed comparable expression of stem cell markers, including KLF4, ΔNp63α and ABCG2, emphasizing the promise of polylactide-based nanofibrous membranes for further investigations.

• Keywords
• Biomaterial, Limbal epithelial stem cells, Ocular tissue engineering, PDLLA, Tissue sealant,
• Publication type
• Journal Article MeSH

Fibrin plays an important role during wound healing and skin regeneration. It is often applied in clinical practice for treatment of skin injuries or as a component of skin substitutes. We prepared electrospun nanofibrous membranes made from poly(l-lactide) modified with a thin fibrin nanocoating. Fibrin surrounded the individual fibers in the membrane and also formed a thin fibrous mesh on several places on the membrane surface. The cell-free fibrin nanocoating remained stable in the cell culture medium for 14 days and did not change its morphology. On membranes populated with human dermal fibroblasts, the rate of fibrin degradation correlated with the degree of cell proliferation. The cell spreading, mitochondrial activity, and cell population density were significantly higher on membranes coated with fibrin than on nonmodified membranes, and this cell performance was further improved by the addition of ascorbic acid in the cell culture medium. Similarly, fibrin stimulated the expression and synthesis of collagen I in human dermal fibroblasts, and this effect was further enhanced by ascorbic acid. The expression of beta1-integrins was also improved by fibrin, and on pure polylactide membranes, it was slightly enhanced by ascorbic acid. In addition, ascorbic acid promoted deposition of collagen I in the form of a fibrous extracellular matrix. Thus, the combination of nanofibrous membranes with a fibrin nanocoating and ascorbic acid seems to be particularly advantageous for skin tissue engineering.

• Keywords
• ascorbic acid, beta1-integrins, collagen I synthesis, electrospun nanofibers, fibrin, fibroblasts, nanocoating, nanomedicine, nanotechnology, skin tissue engineering,
• MeSH
• Cell Differentiation MeSH
• Electrochemistry methods   MeSH
• Extracellular Matrix metabolism   MeSH
• Fibrin chemistry   metabolism   MeSH
• Fibroblasts cytology   metabolism   MeSH
• Fluorescent Antibody Technique MeSH
• Immunoenzyme Techniques MeSH
• Collagen genetics   metabolism   MeSH
• Cells, Cultured MeSH
• Skin cytology   metabolism   MeSH
• Real-Time Polymerase Chain Reaction MeSH
• Humans MeSH
• RNA, Messenger genetics   MeSH
• Nanofibers chemistry   MeSH
• Polyesters chemistry   MeSH
• Reverse Transcriptase Polymerase Chain Reaction MeSH
• Cell Proliferation MeSH
• Regeneration physiology   MeSH
• Tissue Engineering methods   MeSH
• Check Tag
• Humans MeSH
• Publication type
• Journal Article MeSH
• Research Support, Non-U.S. Gov't MeSH
• Names of Substances
• Fibrin MeSH
• Collagen MeSH
• RNA, Messenger MeSH
• poly(lactide) MeSH Browser
• Polyesters MeSH

The porous polymer foams act as a template for neotissuegenesis in tissue engineering, and, as a reservoir for cell transplants such as pancreatic islets while simultaneously providing a functional interface with the host body. The fabrication of foams with the controlled shape, size and pore structure is of prime importance in various bioengineering applications. To this end, here we demonstrate a thermally induced phase separation (TIPS) based facile process for the fabrication of polymer foams with a controlled architecture. The setup comprises of a metallic template bar (T), a metallic conducting block (C) and a non-metallic reservoir tube (R), connected in sequence T-C-R. The process hereinafter termed as Dip TIPS, involves the dipping of the T-bar into a polymer solution, followed by filling of the R-tube with a freezing mixture to induce the phase separation of a polymer solution in the immediate vicinity of T-bar; Subsequent free-drying or freeze-extraction steps produced the polymer foams. An easy exchange of the T-bar of a spherical or rectangular shape allowed the fabrication of tubular, open- capsular and flat-sheet shaped foams. A mere change in the quenching time produced the foams with a thickness ranging from hundreds of microns to several millimeters. And, the pore size was conveniently controlled by varying either the polymer concentration or the quenching temperature. Subsequent in vivo studies in brown Norway rats for 4-weeks demonstrated the guided cell infiltration and homogenous cell distribution through the polymer matrix, without any fibrous capsule and necrotic core. In conclusion, the results show the "Dip TIPS" as a facile and adaptable process for the fabrication of anisotropic channeled porous polymer foams of various shapes and sizes for potential applications in tissue engineering, cell transplantation and other related fields.

• MeSH
• Bioengineering methods   MeSH
• Time Factors MeSH
• Calorimetry, Differential Scanning MeSH
• Microscopy, Electron, Scanning MeSH
• Molecular Weight MeSH
• Polymers chemistry   MeSH
• Porosity MeSH
• Rats, Inbred BN MeSH
• Surface Properties MeSH
• Mercury analysis   MeSH
• Temperature * MeSH
• Tissue Scaffolds chemistry   MeSH
• Phase Transition * MeSH
• Animals MeSH
• Check Tag
• Male MeSH
• Animals MeSH
• Publication type
• Journal Article MeSH
• Research Support, Non-U.S. Gov't MeSH
• Names of Substances
• Polymers MeSH
• Mercury MeSH

The technique for fabrication of soft porous hydrogels, in which both the size and the orientation of inner pores can be controlled, was developed. Three-dimensional hydrophilic gels based on poly[2-hydroxyethyl methacrylate] are designed as scaffolds for regeneration of soft tissues, e.g., nerve tissue. Anisotropic macropores of the size ranging from 10 to 50 microm were formed (1) by using a porogen-leaching method with a solid organic porogen, (2) by phase-separation during gelation in solvent-nonsolvent mixture, or (3) by combination of solid porogen elimination and phase-separation. As a porogen, poly(L-lactide) fibers were applied and consequently washed away under mild conditions to obtain desired spatial orientation of pores. Highly water-swollen polymer gels were characterized with high pressure (low vacuum) scanning electron microscopy (AquaSEM). The morphology of voids remaining after removing the solid PLLA porogen (the macropores) was clearly shown.

• MeSH
• Biocompatible Materials chemistry   MeSH
• Hydrogels chemistry   MeSH
• Microscopy, Electron, Scanning MeSH
• Polyamines chemistry   MeSH
• Polyhydroxyethyl Methacrylate analogs & derivatives   chemistry   MeSH
• Guided Tissue Regeneration * MeSH
• Publication type
• Journal Article MeSH
• Research Support, Non-U.S. Gov't MeSH
• Names of Substances
• Biocompatible Materials MeSH
• Hydrogels MeSH
• poly(2-hydroxyethyl methacrylate)-polyamine graft copolymer MeSH Browser
• Polyamines MeSH
• Polyhydroxyethyl Methacrylate MeSH

To modify the surface of poly(L-lactide) (PLA) supports, we have investigated the feasibility to deposit on the PLA surface Langmuir-Blodgett films of amphiphilic block copolymers based on poly(L-lactide). AB and ABA block copolymers were prepared with PLA as the A block and either poly(ethylene oxide), alpha-methoxy-omega-hydroxy poly(ethylene oxide), alpha-carboxy-omega-hydroxy poly(ethylene oxide) or poly(L-aspartic acid) as the B blocks. Films with phase-separated hydrophilic and hydrophobic blocks in a bilayer "brush" structure were prepared by compression of the copolymer Langmuir films on the water/air interface. The interfacial behavior of the monolayers and the effect of the copolymer composition on the phase separation was followed by measurements of the surface-pressure/area isotherms using a Langmuir trough and by contact angle measurement of deposited Langmuir-Blodgett (LB) films. The phase separation of the hydrophilic and PLA blocks is more effective in diblock AB copolymers compared with triblock ABA copolymers. The presence of ionic groups in the hydrophilic chains facilitates penetration of hydrophilic segments into the water subphase. Dynamic contact angle measurements were used to study the stability of the LB-films transferred on the PLA support and the changes in the surface properties upon incubation of surfaces in water.

• Publication type
• Journal Article MeSH