We focused on polydimethylsiloxane (PDMS) as a substrate for replication, micropatterning, and construction of biologically active surfaces. The novelty of this study is based on the combination of the argon plasma exposure of a micropatterned PDMS scaffold, where the plasma served as a strong tool for subsequent grafting of collagen coatings and their application as cell growth scaffolds, where the standard was significantly exceeded. As part of the scaffold design, templates with a patterned microstructure of different dimensions (50 × 50, 50 × 20, and 30 × 30 μm2) were created by photolithography followed by pattern replication on a PDMS polymer substrate. Subsequently, the prepared microstructured PDMS replicas were coated with a type I collagen layer. The sample preparation was followed by the characterization of material surface properties using various analytical techniques, including scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). To evaluate the biocompatibility of the produced samples, we conducted studies on the interactions between selected polymer replicas and micro- and nanostructures and mammalian cells. Specifically, we utilized mouse myoblasts (C2C12), and our results demonstrate that we achieved excellent cell alignment in conjunction with the development of a cytocompatible surface. Consequently, the outcomes of this research contribute to an enhanced comprehension of surface properties and interactions between structured polymers and mammalian cells. The use of periodic microstructures has the potential to advance the creation of novel materials and scaffolds in tissue engineering. These materials exhibit exceptional biocompatibility and possess the capacity to promote cell adhesion and growth.

• Keywords
• PDMS, coating, collagen type I, cytocompatibility, microstructure, myoblast cell, nanostructured pattern, replication, soft lithography,
• MeSH
• Cell Adhesion MeSH
• Dimethylpolysiloxanes chemistry   MeSH
• Collagen * chemistry   MeSH
• Myoblasts MeSH
• Mice MeSH
• Surface Properties MeSH
• Mammals MeSH
• Tissue Engineering * MeSH
• Animals MeSH
• Check Tag
• Mice MeSH
• Animals MeSH
• Publication type
• Journal Article MeSH
• Names of Substances
• Dimethylpolysiloxanes MeSH
• Collagen * MeSH

While polymers are widely utilized materials in the biomedical industry, they are rarely used in an unmodified state. Some kind of a surface treatment is often necessary to achieve properties suitable for specific applications. There are multiple methods of surface treatment, each with their own pros and cons, such as plasma and laser treatment, UV lamp modification, etching, grafting, metallization, ion sputtering and others. An appropriate treatment can change the physico-chemical properties of the surface of a polymer in a way that makes it attractive for a variety of biological compounds, or, on the contrary, makes the polymer exhibit antibacterial or cytotoxic properties, thus making the polymer usable in a variety of biomedical applications. This review examines four popular methods of polymer surface modification: laser treatment, ion implantation, plasma treatment and nanoparticle grafting. Surface treatment-induced changes of the physico-chemical properties, morphology, chemical composition and biocompatibility of a variety of polymer substrates are studied. Relevant biological methods are used to determine the influence of various surface treatments and grafting processes on the biocompatibility of the new surfaces-mammalian cell adhesion and proliferation is studied as well as other potential applications of the surface-treated polymer substrates in the biomedical industry.

• Keywords
• antimicrobial properties, laser treatment, nanoparticles, nanoscale design, plasma exposure, surface modification, tissue engineering,
• Publication type
• Journal Article MeSH
• Review MeSH

Cell colonization of synthetic polymers can be regulated by physical and chemical modifications of the polymer surface. High-density and low-density polyethylene (HDPE and LDPE) were therefore activated with Ar⁺ plasma and grafted with fibronectin (Fn) or bovine serum albumin (BSA). The water drop contact angle usually decreased on the plasma-treated samples, due to the formation of oxidized groups, and this decrease was inversely related to the plasma exposure time (50-300 s). The presence of nitrogen and sulfur on the polymer surface, revealed by X-ray photoelectron spectroscopy (XPS), and also by immunofluorescence staining, showed that Fn and BSA were bound to this surface, particularly to HDPE. Plasma modification and grafting with Fn and BSA increased the nanoscale surface roughness of the polymer. This was mainly manifested on HDPE. Plasma treatment and grafting with Fn or BSA improved the adhesion and growth of vascular smooth muscle cells in a serum-supplemented medium. The final cell population densities on day 6 after seeding were on an average higher on LDPE than on HDPE. In a serum-free medium, BSA grafted to the polymer surface hampered cell adhesion. Thus, the cell behavior on polyethylene can be modulated by its type, intensity of plasma modification, grafting with biomolecules, and composition of the culture medium.

• Keywords
• albumin, bioactivity, biocompatibility, cell spreading area, fibronectin, nanoscale surface roughness, plasma treatment, tissue engineering, wettability,
• Publication type
• Journal Article MeSH

The attractiveness of synthetic polymers for cell colonization can be affected by physical, chemical, and biological modification of the polymer surface. In this study, low-density polyethylene (LDPE) was treated by an Ar(+) plasma discharge and then grafted with biologically active substances, namely, glycine (Gly), polyethylene glycol (PEG), bovine serum albumin (BSA), colloidal carbon particles (C), or BSA+C. All modifications increased the oxygen content, the wettability, and the surface free energy of the materials compared to the pristine LDPE, but these changes were most pronounced in LDPE with Gly or PEG, where all the three values were higher than in the only plasma-treated samples. When seeded with vascular smooth muscle cells (VSMCs), the Gly- or PEG-grafted samples increased mainly the spreading and concentration of focal adhesion proteins talin and vinculin in these cells. LDPE grafted with BSA or BSA+C showed a similar oxygen content and similar wettability, as the samples only treated with plasma, but the nano- and submicron-scale irregularities on their surface were more pronounced and of a different shape. These samples promoted predominantly the growth, the formation of a confluent layer, and phenotypic maturation of VSMC, demonstrated by higher concentrations of contractile proteins alpha-actin and SM1 and SM2 myosins. Thus, the behavior of VSMC on LDPE can be regulated by the type of bioactive substances that are grafted.

• MeSH
• Aorta cytology   drug effects   MeSH
• Biocompatible Materials chemistry   pharmacology   MeSH
• Cell Adhesion drug effects   MeSH
• Glycine chemistry   pharmacology   MeSH
• Rats MeSH
• Cells, Cultured MeSH
• Myocytes, Smooth Muscle cytology   drug effects   MeSH
• Polyethylene chemistry   pharmacology   MeSH
• Polyethylene Glycols chemistry   pharmacology   MeSH
• Surface Properties MeSH
• Cell Proliferation drug effects   MeSH
• Serum Albumin, Bovine chemistry   pharmacology   MeSH
• Muscle, Smooth, Vascular cytology   drug effects   MeSH
• Animals MeSH
• Check Tag
• Rats MeSH
• Animals MeSH
• Publication type
• Journal Article MeSH
• Research Support, Non-U.S. Gov't MeSH
• Names of Substances
• Biocompatible Materials MeSH
• Glycine MeSH
• Polyethylene MeSH
• Polyethylene Glycols MeSH
• Serum Albumin, Bovine MeSH