The present study investigates the effect of an oxidized nanocrystalline diamond (O-NCD) coating functionalized with bone morphogenetic protein 7 (BMP-7) on human osteoblast maturation and extracellular matrix mineralization in vitro and on new bone formation in vivo. The chemical structure and the morphology of the NCD coating and the adhesion, thickness and morphology of the superimposed BMP-7 layer have also been assessed. The material analysis proved synthesis of a conformal diamond coating with a fine nanostructured morphology on the Ti6Al4V samples. The homogeneous nanostructured layer of BMP-7 on the NCD coating created by a physisorption method was confirmed by AFM. The osteogenic maturation of hFOB 1.19 cells in vitro was only slightly enhanced by the O-NCD coating alone without any increase in the mineralization of the matrix. Functionalization of the coating with BMP-7 resulted in more pronounced cell osteogenic maturation and increased extracellular matrix mineralization. Similar results were obtained in vivo from micro-CT and histological analyses of rabbit distal femurs with screws implanted for 4 or 12 weeks. While the O-NCD-coated implants alone promoted greater thickness of newly-formed bone in direct contact with the implant surface than the bare material, a further increase was induced by BMP-7. It can be therefore concluded that O-NCD coating functionalized with BMP-7 is a promising surface modification of metallic bone implants in order to improve their osseointegration.

• MeSH
• biokompatibilní potahované materiály chemie   farmakologie   MeSH
• diamant chemie   MeSH
• extracelulární matrix MeSH
• kostní morfogenetický protein 7 * farmakologie   MeSH
• králíci MeSH
• osteointegrace * MeSH
• slitiny MeSH
• titan MeSH
• zvířata MeSH
• Check Tag
• králíci MeSH
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH
• Názvy látek
• biokompatibilní potahované materiály MeSH
• diamant MeSH
• kostní morfogenetický protein 7 * MeSH
• slitiny MeSH
• titan MeSH
• titanium alloy (TiAl6V4) MeSH Prohlížeč

A silicalite-1 film (SF) deposited on Ti-6Al-4V alloy was investigated in this study as a promising coating for metallic implants. Two forms of SFs were prepared: as-synthesized SFs (SF-RT), and SFs heated up to 500 °C (SF-500) to remove the excess of template species from the SF surface. The SFs were characterized in detail by X-ray photoelectron spectroscopy (XPS), by Fourier transform infrared spectroscopy (FTIR), by scanning electron microscopy (SEM) and water contact angle measurements (WCA). Two types of bone-derived cells (hFOB 1.19 non-tumor fetal osteoblast cell line and U-2 OS osteosarcoma cell line) were used for a biocompatibility assessment. The initial adhesion of hFOB 1.19 cells, evaluated by cell numbers and cell spreading area, was better supported by SF-500 than by SF-RT. While no increase in cell membrane damage, in ROS generation and in TNF-alpha secretion of bone-derived cells grown on both SFs was found, gamma H2AX staining revealed an elevated DNA damage response of U-2 OS cells grown on heat-treated samples (SF-500). This study also discusses differences between osteosarcoma cell lines and non-tumor osteoblastic cells, stressing the importance of choosing the right cell type model.

• MeSH
• biokompatibilní materiály chemie   MeSH
• buněčná membrána účinky léků   MeSH
• buněčné linie MeSH
• cytotoxiny chemie   farmakologie   MeSH
• fotoelektronová spektroskopie metody   MeSH
• lidé MeSH
• mikroskopie elektronová rastrovací metody   MeSH
• nádorové buněčné linie MeSH
• osteoblasty účinky léků   MeSH
• osteocyty účinky léků   MeSH
• povrchové vlastnosti účinky léků   MeSH
• proliferace buněk účinky léků   MeSH
• slitiny MeSH
• testování materiálů metody   MeSH
• titan chemie   MeSH
• vysoká teplota MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH
• Názvy látek
• biokompatibilní materiály MeSH
• cytotoxiny MeSH
• slitiny MeSH
• titan MeSH
• titanium alloy (TiAl6V4) MeSH Prohlížeč

Nanocellulose/nanocarbon composites are newly emerging smart hybrid materials containing cellulose nanoparticles, such as nanofibrils and nanocrystals, and carbon nanoparticles, such as "classical" carbon allotropes (fullerenes, graphene, nanotubes and nanodiamonds), or other carbon nanostructures (carbon nanofibers, carbon quantum dots, activated carbon and carbon black). The nanocellulose component acts as a dispersing agent and homogeneously distributes the carbon nanoparticles in an aqueous environment. Nanocellulose/nanocarbon composites can be prepared with many advantageous properties, such as high mechanical strength, flexibility, stretchability, tunable thermal and electrical conductivity, tunable optical transparency, photodynamic and photothermal activity, nanoporous character and high adsorption capacity. They are therefore promising for a wide range of industrial applications, such as energy generation, storage and conversion, water purification, food packaging, construction of fire retardants and shape memory devices. They also hold great promise for biomedical applications, such as radical scavenging, photodynamic and photothermal therapy of tumors and microbial infections, drug delivery, biosensorics, isolation of various biomolecules, electrical stimulation of damaged tissues (e.g., cardiac, neural), neural and bone tissue engineering, engineering of blood vessels and advanced wound dressing, e.g., with antimicrobial and antitumor activity. However, the potential cytotoxicity and immunogenicity of the composites and their components must also be taken into account.

• Klíčová slova
• carbon nanotubes, cellulose nanocrystals, diamond nanoparticles, drug delivery, fullerenes, graphene, nanofibrillated cellulose, sensors, tissue engineering, wound dressing,
• Publikační typ
• časopisecké články MeSH
• přehledy MeSH