This study elaborates on the design, fabrication, and data analysis details of SPEED, a recently proposed smartphone-based digital polymerase chain reaction (dPCR) device. The dPCR chips incorporate partition diameters ranging from 50 μm to 5 μm, and these partitions are organized into six distinct blocks to facilitate image processing. Due to the superior thermal conductivity of Si and its potential for mass production, the dPCR chips were fabricated on a Si substrate. A temperature control system based on a high-power density Peltier element and a preheating/cooling PCR protocol user interface shortening the thermal cycle time. The optical design employs four 470 nm light-emitting diodes as light sources, with filters and mirrors effectively managing the light emitted during PCR. An algorithm is utilized for image processing and illumination nonuniformity correction including conversion to a monochromatic format, partition identification, skew correction, and the generation of an image correction mask. We validated the device using a range of deoxyribonucleic acid targets, demonstrating its potential applicability across multiple fields. Therefore, we provide guidance and verification of the design and testing of the recently proposed SPEED device.

• Klíčová slova
• Electrical and electronic engineering, Microfluidics,
• Publikační typ
• časopisecké články MeSH

Non-invasive prenatal tests for the detection of fetal aneuploidies are predominantly based on the analysis of cell-free DNA (cfDNA) from the plasma of pregnant women by next-generation sequencing. The development of alternative tests for routine genetic laboratories is therefore desirable. Multiplex digital droplet PCR was used to detect 16 amplicons from chromosome 21 and 16 amplicons from chromosome 18 as the reference. Two fluorescently labeled lock nucleic acid probes were used for the detection of reaction products. The required accuracy was achieved by examining 12 chips from each patient using Stilla technology. The plasma cfDNA of 26 pregnant women with euploid pregnancies and 16 plasma samples from pregnancies with trisomy 21 were analyzed to determine the cutoff value for sample classification. The test was validated in a blind study on 30 plasma samples from pregnant patients with a risk for trisomy 21 ranging from 1:4 to 1:801. The results were in complete agreement with the results of the invasive diagnostic procedure (sensitivity, specificity, PPV, and NPV of 100%). Low cost, and speed of analysis make it a potential screening method for implementation into the clinical workflow to support the combined biochemical and ultrasound results indicating a high risk for trisomy 21.

• MeSH
• aneuploidie MeSH
• Downův syndrom * diagnóza   genetika   MeSH
• lidé MeSH
• polymerázová řetězová reakce MeSH
• prenatální diagnóza metody   MeSH
• těhotenství MeSH
• trizomie MeSH
• volné cirkulující nukleové kyseliny * genetika   MeSH
• Check Tag
• lidé MeSH
• těhotenství MeSH
• ženské pohlaví MeSH
• Publikační typ
• časopisecké články MeSH
• Názvy látek
• volné cirkulující nukleové kyseliny * MeSH

Verification of clonal identity of hop (Humulus lupulus L.) cultivars within breeding programs and germplasm collections is vital to conserving genetic resources. Accurate and economic DNA-based tools are needed in dioecious hop to confirm identity and parentage, neither of which can be reliably determined from morphological observations. In this study, we developed two fingerprinting sets for hop: a 9-SSR fingerprinting set containing high-core repeats that can be run in a single PCR reaction and a kompetitive allele specific PCR (KASP) assay of 25 single nucleotide polymorphisms (SNPs). The SSR set contains a sex-linked primer pair, HI-AGA7, that was used to genotype 629 hop accessions from the US Department of Agriculture (USDA) National Clonal Germplasm Repository (NCGR), the USDA Forage Seed and Cereal Research (FSCR), and the University of Nebraska-Lincoln (UNL) collections. The SSR set identified unique genotypes except for 89 sets of synonymous samples. These synonyms included: cultivars with different designations, the same cultivars from different sources, heat-treated clones, and clonal variants. Population structure analysis clustered accessions into wild North American (WNA) and cultivated groups. Diversity was slightly higher in the cultivated samples due to larger sample size. Parentage and sib-ship analyses were used to identify true-to-type cultivars. The HI-AGA7 marker generated two male- and nine female-specific alleles among the cultivated and WNA samples. The SSR and KASP fingerprinting sets were compared in 190 samples consisting of cultivated and WNA accession for their ability to confirm identity and assess diversity and population structure. The SSR fingerprinting set distinguished cultivars, selections and WNA accessions while the KASP assays were unable to distinguish the WNA samples and had lower diversity estimates than the SSR set. Both fingerprinting sets are valuable tools for identity confirmation and parentage analysis in hop for different purposes. The 9-SSR assay is cost efficient when genotyping a small number of wild and cultivated hop samples (<96) while the KASP assay is easy to interpret and cost efficient for genotyping a large number of cultivated samples (multiples of 96).

• MeSH
• alely MeSH
• fylogeneze MeSH
• genetická variace MeSH
• genotyp MeSH
• Humulus * genetika   MeSH
• mikrosatelitní repetice genetika   MeSH
• polymerázová řetězová reakce MeSH
• šlechtění rostlin MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH
• Research Support, U.S. Gov't, Non-P.H.S. MeSH

• Klíčová slova
• COVID-19, RT-PCR, point of care, point of need, portable systems,
• MeSH
• COVID-19 diagnóza   virologie   MeSH
• design vybavení MeSH
• lidé MeSH
• point of care testing MeSH
• RNA virová analýza   genetika   MeSH
• SARS-CoV-2 genetika   izolace a purifikace   MeSH
• techniky amplifikace nukleových kyselin přístrojové vybavení   MeSH
• testování na COVID-19 průkazem nukleové kyseliny přístrojové vybavení   MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• úvodníky MeSH
• Názvy látek
• RNA virová MeSH

Real-time (quantitative) polymerase chain reaction (qPCR) has been widely applied in molecular diagnostics due to its immense sensitivity and specificity. qPCR multiplexing, based either on fluorescent probes or intercalating dyes, greatly expanded PCR capability due to the concurrent amplification of several deoxyribonucleic acid sequences. However, probe-based multiplexing requires multiple fluorescent channels, while intercalating dye-based multiplexing needs primers to be designed for amplicons having different melting temperatures. Here, we report a single fluorescent channel-based qPCR duplexing method on a model containing the sequence of chromosomes 21 (Chr21) and 18 (Chr18). We combined nonspecific intercalating dye EvaGreen with a 6-carboxyfluorescein (FAM) probe specific to either Chr21 or Chr18. The copy number (cn) of the target linked to the FAM probe could be determined in the entire tested range from the denaturation curve, while the cn of the other one was determined from the difference between the denaturation and elongation curves. We recorded the amplitude of fluorescence at the end of denaturation and elongation steps, thus getting statistical data set to determine the limit of the proposed method in detail in terms of detectable concentration ratios of both targets. The proposed method eliminated the fluorescence overspilling that happened in probe-based qPCR multiplexing and determined the specificity of the PCR product via melting curve analysis. Additionally, we performed and verified our method using a commercial thermal cycler instead of a self-developed system, making it more generally applicable for researchers. This quantitative single-channel duplexing method is an economical substitute for a conventional rather expensive probe-based qPCR requiring different color probes and hardware capable of processing these fluorescent signals.

• Publikační typ
• časopisecké články MeSH

Since its invention in 1986, the polymerase chain reaction (PCR), has become a well-established method for the detection and amplification of deoxyribonucleic acid (DNA) with a specific sequence. Incorporating fluorescent probes, known as TaqMan probes, or DNA intercalating dyes, such as SYBR Green, into the PCR mixture allows real-time monitoring of the reaction progress and extraction of quantitative information. Previously reported real-time PCR product detection using intercalating dyes required melting curve analysis (MCA) to be performed following thermal cycling. Here, we propose a technique to perform dynamic MCA during each thermal cycle, based on a continuous fluorescence monitoring method, providing qualitative and quantitative sample information. We applied the proposed method in multiplexing detection of hepatitis B virus DNA and complementary DNA of human immunodeficiency virus as well as glyceraldehyde 3-phosphate dehydrogenase in different concentration ratios. We extracted the DNA melting curve and its derivative from each PCR cycle during the transition from the elongation to the denaturation temperature with a set heating rate of 0.8 K·s-1and then used the data to construct individual PCR amplification curves for each gene to determine the initial concentration of DNA in the sample. Our proposed method allows researchers to look inside the PCR in each thermal cycle, determining the PCR product specificity in real time instead of waiting until the end of the PCR. Additionally, the slow transition rate from elongation to denaturation provides a dynamic multiplexing assay, allowing the detection of at least three genes in real time.

• Publikační typ
• časopisecké články MeSH