co-sputtering
Dotaz
Zobrazit nápovědu
The use of protective coatings in biomedical field is an ongoing scientific challenge. Among different materials, carbon-based coatings are considered a potential surface treatment for orthopaedic implants. In this study, the effect of Zr incorporation in amorphous carbon coatings on the wear behaviour under protein containing lubrication was investigated. The coatings were deposited by dc unbalanced magnetron sputtering in Ar (non-hydrogenated) and Ar+CH4 (hydrogenated) discharges onto Ti based biomedical substrate. To improve the adhesion between the film and substrate a functional gradient Ti based layer was deposited (~550 nm). The surface wettability was evaluated to assess the effect of the Zr and hydrogen content. The films with Zr were found to be hydrophobic enhancing the protein adsorption onto the surface; no significant differences were found when H was incorporated in the films. The adsorption layer characterized by X-ray photoelectron spectroscopy showed a well defined nitrogen peak originating from the organic layer. The tribological properties of the film were evaluated by unidirectional pin-on-disc testing with diluted bovine serum lubrication and physiological solution at 37 ± 3C°. The friction and the wear of the coatings were very low compared to uncoated substrates in both lubrication conditions. The ability of the surfaces to adsorb proteins was considered as the driving force for wear resistance acting as a protecting layer. In addition, the incorporation of Zr decreased the wear of the counterbody (Ti alloy) due to higher albumin adsorption.
- MeSH
- adsorpce MeSH
- biokompatibilní materiály MeSH
- biokompatibilní potahované materiály chemie MeSH
- fotoelektronová spektroskopie MeSH
- mechanický stres MeSH
- povrchové vlastnosti MeSH
- proteiny chemie MeSH
- protézy a implantáty MeSH
- sérový albumin hovězí chemie MeSH
- skot MeSH
- slitiny MeSH
- testování materiálů MeSH
- titan chemie MeSH
- tření MeSH
- uhlík chemie MeSH
- vodík chemie MeSH
- zirkonium chemie MeSH
- zvířata MeSH
- Check Tag
- skot MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
We have developed a novel simple method for effective preparing gold nanoparticles (AuNPs) intended for utilization in biomedicine. The method is based on gold sputtering into liquid poly(ethylene glycol) (PEG). The PEG was used as a basic biocompatible stabilizer of the AuNP colloid. In addition, two naturally occurring polysaccharides - Chitosan (Ch) and Methylcellulose (MC) - were separately diluted into the PEG base with the aims to enhance the yield of the sputtering without changing the sputtering parameters, and to further improve the stability and the biocompatibility of the colloid. The colloids were sterilized by steam, and their stability was measured before and after the sterilization process by dynamic light scattering and UV-Vis spectrophotometry. The results indicated a higher sputtering yield in the colloids containing the polysaccharides. The colloids were also characterized by atomic absorption spectroscopy (AAS) to reveal the composition of the prepared nanoparticles by transmission electron microscopy (TEM) to visualize the nanoparticles and to evaluate their size and clustering, and by rheometry to estimate the viscosity of the colloids. The zeta-potential of the AuNPs was also determined as an important parameter indicating the stability and the biocompatibility of the colloid. In addition, in vitro tests of antimicrobial activity and cytotoxicity were carried out to estimate the biological activity and the biocompatibility of the colloids. Antimicrobial tests were performed by a drip test on two bacterial strains - Gram-positive Staphylococcus epidermidis and Gram-negative Escherichia coli. AuNP with chitosan proved to possess the highest antibacterial activity, especially towards the Gram-positive S. epidermidis. In vitro tests on eukaryotic cells, i.e. human osteoblastic cell line SAOS-2 and primary normal human dermal fibroblasts (NHDF), were performed after a 7-day cultivation to determine the effect and the toxic dose of the colloids on human cells. The studied colloid concentrations were in the range from 0.6 μg/ml to 6 μg/ml. Toxicity of the colloids started to reappear at a concentration of 4.5 μg/ml, especially with chitosan in the colloid, where the colloid with a concentration of 6 μg/ml proved to be the most toxic, especially towards the SAOS-2 cell line. However, the PEG and PEG-MC containing colloids proved to be relatively non-toxic, even at the highest concentration, but with a slowly decreasing tendency of the cell metabolic activity.
- MeSH
- antibakteriální látky chemie farmakologie MeSH
- buněčné linie MeSH
- chitosan chemie MeSH
- dynamický rozptyl světla MeSH
- Escherichia coli účinky léků MeSH
- koloidy chemie MeSH
- kovové nanočástice chemie MeSH
- lidé MeSH
- methylcelulosa chemie MeSH
- polysacharidy chemie MeSH
- stabilita léku MeSH
- Staphylococcus epidermidis účinky léků MeSH
- sterilizace MeSH
- velikost částic MeSH
- zlato chemie farmakologie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
Platinum is the most widespread electrode material used for implantable biomedical and neuroelectronic devices, motivating exploring ways to improve its performance and understand its fundamental properties. Using reactive magnetron sputtering, PtOx is prepared, which upon partial reduction yields a porous thin-film form of platinum with favorable properties, notably record-low impedance values outcompeting other reports for platinum-based electrodes. It is established that its high electrochemical capacitance scales with thickness, in the way of volumetric capacitor materials like IrOx and poly(3,4-ethylenedioxythiophene), PEDOT. Unlike these two well-known analogs, however, it is found that PtOx capacitance is not caused by reversible pseudofaradaic reactions but rather due to high surface area. In contrast to IrOx, PtOx is not a reversible valence-change oxide, but rather a porous form of platinum. The findings show that this oxygen-containing form of Pt can place Pt electrodes on a level competitive with IrOx and PEDOT. Due to its relatively low cost and ease of preparation, PtOx can be a good choice for microfabricated bioelectronic devices.
Copper-coated nanofibrous materials are desirable for catalysis, electrochemistry, sensing, and biomedical use. The preparation of copper or copper-coated nanofibers can be pretty challenging, requiring many chemical steps that we eliminated in our robust approach, where for the first time, Cu was deposited by magnetron sputtering onto temperature-sensitive polymer nanofibers. For the first time, the large-scale modeling of PCL films irradiation by molecular dynamics simulation was performed and allowed to predict the ions penetration depth and tune the deposition conditions. The Cu-coated polycaprolactone (PCL) nanofibers were thoroughly characterized and tested as antibacterial agents for various Gram-positive and Gram-negative bacteria. Fast release of Cu2+ ions (concentration up to 3.4 µg/mL) led to significant suppression of E. coli and S. aureus colonies but was insufficient against S. typhimurium and Ps. aeruginosa. The effect of Cu layer oxidation upon contact with liquid media was investigated by X-ray photoelectron spectroscopy revealing that, after two hours, 55% of Cu atoms are in form of CuO or Cu(OH)2. The Cu-coated nanofibers will be great candidates for wound dressings thanks to an interesting synergistic effect: on the one hand, the rapid release of copper ions kills bacteria, while on the other hand, it stimulates the regeneration with the activation of immune cells. Indeed, copper ions are necessary for the bacteriostatic action of cells of the immune system. The reactive CO2/C2H4 plasma polymers deposited onto PCL-Cu nanofibers can be applied to grafting of viable proteins, peptides, or drugs, and it further explores the versatility of developed nanofibers for biomedical applications use.
- Publikační typ
- časopisecké články MeSH
Nanocomposite Ti/hydrocarbon plasma polymer (Ti/ppCH) films were deposited by DC magnetron sputtering of titanium target in n-hexane, argon, or a mixture of these two gases. The resultant films were heterogeneous, with inorganic regions of nanometer scale distributed within a plasma polymer matrix. The titanium content was controlled by adjusting the argon/n-hexane ratio in the working gas. In the pure n-hexane atmosphere, the Ti concentration was found to be below 1 at %, whereas in pure argon it reached 20 at %, as measured by Rutherford backscattering spectroscopy and elastic recoil detection analysis (RBS/ERDA). A high level of titanium oxidation is detected with TiO(2), substoichiometric titania, and titanium carbide, composing an inorganic phase of the composite films. In addition, high hydrogen content is detected in films rich with titanium. Ti-deficient and Ti-rich films proved equally good substrates for adhesion and growth of cultured human osteoblast-like MG 63 cells. In these cells, the population densities on days 1, 3, and 7 after seeding, spreading area on day 1, formation of talin-containing focal adhesion plaques as well as concentrations of talin and osteocalcin (per mg of protein) were comparable to the values obtained in cells on the reference cell culture materials, represented by microscopic glass coverslips or a polystyrene dish. An interesting finding was made when the Ti/ppCH films were seeded with calf pulmonary artery endothelial cells of the line CPAE. The cell population densities, the spreading area and also the concentration of von Willebrand factor, a marker of endothelial cell maturation, were significantly higher on Ti-rich than on Ti-deficient films. On Ti-rich films, these parameters were also higher or similar in comparison with the reference cell culture materials. Thus, both types of films could be used for coating bone implants, of which the Ti-rich film remains effective in enhancing the endothelialization of blood contacting artificial materials.
- MeSH
- biokompatibilní materiály chemie MeSH
- buněčná adheze MeSH
- buněčná diferenciace MeSH
- buněčné linie MeSH
- endoteliální buňky cytologie fyziologie MeSH
- financování organizované MeSH
- lidé MeSH
- magnetismus MeSH
- nanokompozity chemie MeSH
- osteoblasty cytologie fyziologie MeSH
- osteokalcin metabolismus MeSH
- povrchové vlastnosti MeSH
- skot MeSH
- talin metabolismus MeSH
- testování materiálů MeSH
- titan chemie MeSH
- uhlovodíky chemie MeSH
- von Willebrandův faktor metabolismus MeSH
- zvířata MeSH
- Check Tag
- lidé MeSH
- skot MeSH
- zvířata MeSH
... Antireflexní úprava 100 -- 6.2.3.1 Tepelné naparování 106 -- 6.2.3.2 Napaření za pomoci plazmy -- (Plasma Sputtering ...
Vyd. 1. 140 s. : il. (převážně barev.), tab. ; 21 cm
