We report on the use of new biofunctionalized gold nanoparticles (bio-AuNPs) that enable a surface plasmon resonance (SPR) biosensor to detect low levels of carcinoembryonic antigen (CEA) in human blood plasma. Bio-AuNPs consist of gold nanoparticles functionalized both with (1) streptavidin, to provide high affinity for the biotinylated secondary antibody used in the second step of the CEA sandwich assay, and with (2) bovine serum albumin, to minimize the nonspecific interaction of the bio-AuNPs with complex samples (blood plasma). We demonstrate that this approach makes it possible for the SPR biosensor to detect CEA in blood plasma at concentrations as low as 0.1 ng/mL, well below normal physiological levels (approximately nanograms per milliliter). Moreover, the limit of detection achieved using this approach is better by a factor of more than 1,000 than limits of detection reported so far for CEA in blood plasma using SPR biosensors.

• MeSH
• biotinylace MeSH
• imobilizované proteiny chemie   MeSH
• karcinoembryonální antigen krev   imunologie   MeSH
• lidé MeSH
• limita detekce MeSH
• nanočástice chemie   MeSH
• povrchová plasmonová rezonance metody   MeSH
• protilátky chemie   imunologie   MeSH
• sérový albumin hovězí chemie   MeSH
• skot MeSH
• streptavidin chemie   MeSH
• zlato chemie   MeSH
• zvířata MeSH
• Check Tag
• lidé MeSH
• skot MeSH
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH
• hodnotící studie MeSH
• práce podpořená grantem MeSH

Cell sheet harvesting offers a great potential for the development of new therapies for regenerative medicine. For cells to adhere onto surfaces, proliferate, and to be released on demand, thermoresponsive polymeric coatings are generally considered to be required. Herein, an alternative approach for the cell sheet harvesting and rapid release on demand is reported, circumventing the use of thermoresponsive materials. This approach is based on the end-group biofunctionalization of non-thermoresponsive and antifouling poly(2-hydroxyethyl methacrylate) (p(HEMA)) brushes with cell-adhesive peptide motifs. While the nonfunctionalized p(HEMA) surfaces are cell-repellant, ligation of cell-signaling ligand enables extensive attachment and proliferation of NIH 3T3 fibroblasts until the formation of a confluent cell layer. Remarkably, the formed cell sheets can be released from the surfaces by gentle rinsing with cell-culture medium. The release of the cells is found to be facilitated by low surface density of cell-adhesive peptides, as confirmed by X-ray photoelectron spectroscopy. Additionally, the developed system affords possibility for repeated cell seeding, proliferation, and release on previously used substrates without any additional pretreatment steps. This new approach represents an alternative to thermally triggered cell-sheet harvesting platforms, offering possibility of capture and proliferation of various rare cell lines via appropriate selection of the cell-adhesive ligand.

• MeSH
• buněčná adheze MeSH
• ligandy MeSH
• peptidy * MeSH
• polymery * chemie   MeSH
• povrchové vlastnosti MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

In this study we investigate the formation of protein-resistant polymer surfaces, such as aliphatic polyesters, through the deposition of self-assemblies of amphiphilic poly(l-lactide)-b-poly(ethylene oxide), PLLA-b-PEO, copolymers as stable nanoparticles with a kinetically frozen PLLA core on model PLLA surfaces. The length of the PEO chains in the corona was tuned to achieve polymer brushes capable of preventing protein adsorption on PLA-based biomaterials. The spectroscopic ellipsometry, IR and XPS analysis, contact angle goniometry, and AFM proved that the PEO chains adopted a brush structure and were preferably exposed on the surface. The low-fouling properties of the physisorbed PLLA-b-PEO layers approached the ones of reactive grafting methods, as shown by surface plasmon resonance spectroscopy. The anti-fouling properties of the prepared PEO brushes provided sufficient interface to prevent cell adhesion as proved in vitro. Thus, the developed surface coating with PLLA-b-PEO colloids can provide an anti-fouling background for the creation of nanopatterned biofunctionalized surfaces in biomedical applications.

• MeSH
• adsorpce MeSH
• biokompatibilní materiály chemie   MeSH
• buněčná adheze MeSH
• endoteliální buňky pupečníkové žíly (lidské) MeSH
• koloidy chemie   MeSH
• lidé MeSH
• nádorové buněčné linie MeSH
• nanočástice chemie   MeSH
• polyestery chemie   MeSH
• polyethylenglykoly chemie   MeSH
• povrchové vlastnosti MeSH
• proteiny chemie   MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• časopisecké články MeSH

Early diagnosis of ongoing malignant disease is crucial to improve survival rate and life quality of the patients and requires sensitive detection of specific biomarkers e.g. prostate-specific antigen (PSA), carcinoembryonic antigen (CEA), alpha-fetoprotein (AFP), etc. In spite of current technological advances, malignant diseases are still identified in rather late stages, which have detrimental effect on the prognosis and treatment of the disease. Here, we present a biosensor able to detect fetuin-A, a potential multibiomarker. The biosensing platform is based on polymer brush combining antifouling monomer units of N-(2-hydroxypropyl)methacrylamide (HPMA) and carboxybetaine methacrylamide (CBMAA), statistically copolymerized by surfaceinitiated atom transfer radical polymerization. The copolymer poly(HPMA-co-CBMAA) exhibits excellent non-fouling properties in the most relevant biological media (i.e. blood plasma) as well as antithrombogenic surface properties by preventing the adhesion of blood components (i.e. leukocytes; platelets; and erythrocytes). Moreover, the polymer brush can be easily functionalized with biorecognition elements maintaining high resistance to blood fouling and the binding capacity can be regulated by tuning the ratio between CBMAA and HPMA units. The superior antifouling properties of the copolymer even after biofunctionalization were exploited to fabricate a new plasmonic biosensor for the analysis of fetuin-A in real clinical blood plasma samples. The assay used in this work can be explored as labelfree affinity biosensor for diagnostics of different biomarkers in real clinical plasma samples and to shift the early biomarker detection toward novel biosensor technologies allowing point of care analysis.

• MeSH
• biologické markery krev   MeSH
• biosenzitivní techniky metody   MeSH
• fetuin A analýza   metabolismus   MeSH
• lidé MeSH
• povrchová plasmonová rezonance metody   MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• časopisecké články MeSH

Specific allergen immunotherapy is frequently associated with adverse reactions. Several strategies are being developed to reduce the allergenicity while maintaining the therapeutic benefits. Peptide immunotherapy is one such approach. Methods for the simple and rapid identification of immunogenic epitopes of allergens (i.e. allergenic epitopes) are ongoing and could potentially lead to peptide-based vaccines. An epitope extraction technique, based on biofunctionalized magnetic microspheres self-organized under a magnetic field in a channel of a simple microfluidic device fabricated from polydimethylsiloxane, was applied in the isolation and identification of prospective allergenic epitopes. Similarly to chromatographic column separations, the easily replaceable plug of self-organized beads in the channel benefits especially from an even larger surface-to-volume ratio and an enhanced interaction of the surfaces with passing samples. Ovalbumin, the major protein of egg white and a typical representative of food allergens, was selected as the model molecule. Highly resistant ovalbumin was at first efficiently digested by a magnetic proteolytic reactor with trypsin treated with l-1-tosylamido-2-phenylethyl chloromethyl ketone and the second step, i.e. capture of allergenic epitopes from the mixture of peptides, was performed by a magnetic immunoaffinity carrier with orientedly immobilized rabbit anti-ovalbumin IgG molecules. Captured peptides were released with 0.05% trifluoroacetic acid. The elution fractions were analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The peptide fragment of ovalbumin HIATNAVLFFGR (m/z: 1345.75, position: 371-382) was identified as a relevant allergenic epitope in this way. Such a microfluidic magnetic force-based epitope extraction technique applied in the epitope mapping of ovalbumin has the potential to be a significant step towards developing safe and cost-effective epitope-based vaccines.

• MeSH
• alergeny chemie   imunologie   MeSH
• epitopy analýza   MeSH
• financování organizované MeSH
• hmotnostní spektrometrie MeSH
• imunomagnetická separace metody   MeSH
• mapování epitopu metody   MeSH
• mikrofluidní analytické techniky metody   MeSH
• mikrosféry MeSH
• ovalbumin chemie   imunologie   MeSH
• potravinová alergie MeSH
• vakcíny MeSH

The success of implant treatment is dependent on the osseointegration of the implant. The main goal of this work was to improve the biofunctionality of the Ti-13Nb-13Zr implant alloy by the production of oxide nanotubes (ONTs) layers for better anchoring in the bone and use as an intelligent carrier in drug delivery systems. Anodization of the Ti-13Nb-13Zr alloy was carried out in 0.5% HF, 1 M (NH4)2SO4 + 2% NH4F, and 1 M ethylene glycol + 4 wt.% NH4F electrolytes. Physicochemical characteristics of ONTs were performed by high-resolution electron microscopy (HREM), X-ray photoelectron spectroscopy (XPS), and scanning Kelvin probe (SKP). Water contact angle studies were conducted using the sitting airdrop method. In vitro biological properties and release kinetics of ibuprofen were investigated. The results of TEM and XPS studies confirmed the formation of the single-walled ONTs of three generations on the bi-phase (α + β) Ti-13Nb-13Zr alloy. The ONTs were composed of oxides of the alloying elements. The proposed surface modification method ensured good hemolytic properties, no cytotoxity for L-929 mouse cells, good adhesion, increased surface wettability, and improved athrombogenic properties of the Ti-13Nb-13Zr alloy. Nanotubular surfaces allowed ibuprofen to be released from the polymer matrix according to the Gallagher-Corrigan model.

• Publikační typ
• časopisecké články MeSH