RPLC Dotaz Zobrazit nápovědu
- MeSH
- chromatografie kapalinová metody MeSH
- hmotnostní spektrometrie metody MeSH
- lidé MeSH
- monitorování léčiv metody MeSH
- superkritická fluidní chromatografie metody MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- úvodníky MeSH
Radioimmunoconjugates represent a promising class of therapeutics and diagnostics. The characterization of intermediate chelator-antibody products, i.e., without the radionuclide, is frequently omitted, bringing significant uncertainty in the radioimmunoconjugate preparation. In the present study, we explored the utility of reversed-phase (RPLC) and hydrophilic interaction (HILIC) liquid chromatography with UV detection to characterize ramucirumab stochastically conjugated with p-SCN-Bn-CHX-A"-DTPA chelator (shortly DTPA). The conjugation was well reflected in RPLC chromatograms, while chromatograms from HILIC were significantly less informative. RPLC analyses at the intact level confirmed that the conjugation resulted in a heterogeneous mixture of modified ramucirumab. Moreover, the RPLC of DTPA-ramucirumab confirmed heterogeneous conjugation of all subunits. The peptide mapping did not reveal substantial changes after the conjugation, indicating that most parts of ramucirumab molecules remained unmodified and that the DTPA chelator was bound to various sites. Eventually, the RPLC method for analysis of intact ramucirumab was successfully applied to online monitoring of conjugation reaction in 1 h intervals for a total of 24 h synthesis, which readily reflected the structural changes of ramucirumab in the form of retention time shift by 0.21 min and increase in peak width by 0.22 min. The results were obtained in real-time, practically under 10 min per monitoring cycle. To the best of our knowledge, our study represents the first evaluation of RPLC and HILIC to assess the quality of intermediates during the on-site preparation of radioimmunoconjugates prior to radiolabeling.
The performance of the current bottom-up liquid chromatography hyphenated with mass spectrometry (LC-MS) analyses has undoubtedly been fueled by spectacular progress in mass spectrometry. It is thus not surprising that the MS instrument attracts the most attention during LC-MS method development, whereas optimizing conditions for peptide separation using reversed-phase liquid chromatography (RPLC) remains somewhat in its shadow. Consequently, the wisdom of the fundaments of chromatography is slowly vanishing from some laboratories. However, the full potential of advanced MS instruments cannot be achieved without highly efficient RPLC. This is impossible to attain without understanding fundamental processes in the chromatographic system and the properties of peptides important for their chromatographic behavior. We wrote this tutorial intending to give practitioners an overview of critical aspects of peptide separation using RPLC to facilitate setting the LC parameters so that they can leverage the full capabilities of their MS instruments. After briefly introducing the gradient separation of peptides, we discuss their properties that affect the quality of LC-MS chromatograms the most. Next, we address the in-column and extra-column broadening. The last section is devoted to key parameters of LC-MS methods. We also extracted trends in practice from recent bottom-up proteomics studies and correlated them with the current knowledge on peptide RPLC separation.
We studied sequence-dependent retention properties of synthetic 5'-terminal phosphate absent trinucleotides containing adenine, guanine and thymine through reversed-phase liquid chromatography (RPLC) and QSRR modelling. We investigated the influence of separation conditions, namely mobile phase composition (ion interaction agent content, pH and organic constituent content), on sequence-dependent separation by means of ion-interaction RPLC (II-RPLC) using two types of models: experimental design-artificial neural networks (ED-ANN), and linear regression based on molecular dynamics data. The aim was to determine those properties of the above-mentioned analytes responsible for the retention dependence of the sequence. Our results show that there is a deterministic relation between sequence and II-RPLC retention properties of the studied trinucleotides. Further, we can conclude that the higher the content of ion-interaction agent in the mobile phase, the more prominent these properties are. We also show that if we approximate the polar component of solvation energy in QSRR by the electrostatic work in transferring molecules from vacuum to water, and the non-polar component by the solvent accessible surface area, these parameters best describe the retention properties of trinucleotides. There are some exceptions to this finding, namely sequences 5'-NAN-3', 5'-ANN-3', 5'-TGN-3', 5'-NTA-3'and 5'-NGA-3' (N stands for generic nucleotide). Their role is still unknown, but since linear regression including these specific constellations showed a higher observable variance coverage than the model with only the basic descriptors, we may assume that solvent-analyte interactions are responsible for the exceptional behaviour of 5'-NAN-3' & 5'-ANN-3' trinucleotides and some intramolecular interactions of neighbouring nucleobases for 5'-TGN-3', 5'-NTA-3'and 5'-NGA-3' trinucleotides.
- MeSH
- adenin analogy a deriváty izolace a purifikace MeSH
- chromatografie s reverzní fází MeSH
- guanin analogy a deriváty izolace a purifikace MeSH
- kvantitativní vztahy mezi strukturou a aktivitou MeSH
- neuronové sítě (počítačové) MeSH
- oligonukleotidy izolace a purifikace MeSH
- rozpouštědla MeSH
- simulace molekulární dynamiky MeSH
- statická elektřina MeSH
- thymin analogy a deriváty izolace a purifikace MeSH
- voda MeSH
- vysokoúčinná kapalinová chromatografie MeSH
- Publikační typ
- časopisecké články MeSH
A new method, reversed phase liquid chromatography with off-line surface-assisted laser desorption/ionization mass spectrometry (RPLC-SALDI MS) for the determination of brassicasterol (BR), cholesterol (CH), stigmasterol (ST), campesterol (CA) and β-sitosterol (SI) in oil samples has been developed. The sample preparation consisted of alkaline saponification followed by extraction of the unsaponificable fraction with diethyl ether. The recovery of the sterols ranged from 91 to 95% with RSD less than 4%. Separation of the five major sterols on a C18 column using methanol-water gradient was achieved in about 10min. An on-line UV detector was employed for the initial sterol detection prior to effluent deposition using a laboratory-built spotter with 1:73 splitter. Off-line SALDI MS was then applied for mass determination/identification and quantification of the separated sterols. Ionization of the nonpolar analytes was achieved by silver ion cationization with silver nanoparticles used as the SALDI matrix providing limits of detection 12, 6 and 11fmol for CH, ST and SI, respectively. Because of the incorporated splitter, the effective limits of detection of the RPLC-SALDI MS analysis were 4, 3 and 4pmol (or 0.08, 0.06 and 0.08μg/mL) for CH, ST and SI, respectively. For quantification, 6-ketocholestanol (KE) was used as the internal standard. The method has been applied for the identification and quantification of sterols in olive, linseed and sunflower oil samples. The described off-line coupling of RPLC to SALDI MS represents an alternative to GC-MS for analysis of nonpolar compounds.
- MeSH
- cholestadienoly chemie izolace a purifikace MeSH
- cholesterol analogy a deriváty chemie izolace a purifikace MeSH
- chromatografie s reverzní fází metody normy MeSH
- fytosteroly chemie izolace a purifikace MeSH
- ketocholesteroly chemie izolace a purifikace MeSH
- lněný olej analýza chemie MeSH
- oleje rostlin analýza chemie MeSH
- referenční standardy MeSH
- sitosteroly chemie izolace a purifikace MeSH
- spektrometrie hmotnostní - ionizace laserem za účasti matrice metody normy MeSH
- stigmasterol chemie izolace a purifikace MeSH
- stříbro chemie MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
Liquid chromatography-mass spectrometry (LC-MS) is the method of choice for the untargeted profiling of biological samples. A multiplatform LC-MS-based approach is needed to screen polar metabolites and lipids comprehensively. Different mobile phase modifiers were tested to improve the electrospray ionization process during metabolomic and lipidomic profiling. For polar metabolites, hydrophilic interaction LC using a mobile phase with 10 mM ammonium formate/0.125% formic acid provided the best performance for amino acids, biogenic amines, sugars, nucleotides, acylcarnitines, and sugar phosphate, while reversed-phase LC (RPLC) with 0.1% formic acid outperformed for organic acids. For lipids, RPLC using a mobile phase with 10 mM ammonium formate or 10 mM ammonium formate with 0.1% formic acid permitted the high signal intensity of various lipid classes ionized in ESI(+) and robust retention times. For ESI(-), the mobile phase with 10 mM ammonium acetate with 0.1% acetic acid represented a reasonable compromise regarding the signal intensity of the detected lipids and the stability of retention times compared to 10 mM ammonium acetate alone or 0.02% acetic acid. Collectively, we show that untargeted methods should be evaluated not only on the total number of features but also based on common metabolites detected by a specific platform along with the long-term stability of retention times.
Recent advancements in particle design are common in reversed-phase liquid chromatography (RPLC), but in chiral separations their use is still sporadic in commercially available chiral stationary phases (CSPs). Due to reported lower mass transfer resistance, they might be a promising opportunity to increase efficiency and reduce time of analysis since the relatively higher mass transfer resistance term of CSPs caused by slow adsorption-desorption kinetics is the most performance-limiting factor in enantioselective chromatography. This study was dedicated to the evaluation of new support materials for tert-butylcarbamoylquinine (tBuCQN) based CSP to provide highly efficient and fast enantioseparations. As the main focus of this study, the chiral selector tBuCQN was immobilized on sub-2 μm fully porous particles (FPPs) and 2.7 μm superficially porous particles (SPPs) and their column performance in enantioseparation was evaluated in comparison to 5 μm FPPs by van Deemter and Knox analyses as well as kinetic plots using racemic Fmoc-Phe. Both new particle types outperformed the 5 μm FPP benchmark in terms of speed and efficiency, with wider pore materials (160 or 200 Å) being advantageous (over 90 or 120 Å). Basically decisive for the performance gain was the 10-times smaller mass transfer resistance. Furthermore, 2.7 μm 160 Å SPPs outperformed their fully porous sub-2 μm 120 Å counterpart (HminR = 4.64 μm vs. HminR = 8.94 μm) due to various parameters affording reduced plate height h of 1.7. Caused by the inaccessible core, separations were about 2-times faster. Packing of 2.7 μm core-shell particles provided a very homogeneous column bed, and, owing to its higher permeability, the column backpressure was much lower. It enables packing of longer columns providing theoretically separation efficiencies of up to 106 plates per m (as indicated by kinetic plots) and versatile use without the necessity of UHPLC systems. Investigating the effect of particle size reduction (FPPs: 5 μm, 3 μm, 1.7 μm; SPPs: 2.7 μm, 2 μm) and wider pores (FPPs: 120 Å, 200 Å; SPPs: 90 Å, 160 Å), a significantly reduced mass transfer resistance was the driving force for performance gain. Individual contributions of peak dispersion were deconvoluted for 5 μm FPP CSP and confirmed that slow adsorption-desorption kinetics is the most significant contribution to peak broadening in this chromatographic system.
