A film-forming system (FFS) represents a convenient topical dosage form for drug delivery. In this study, a non-commercial poly(lactic-co-glycolic acid) (PLGA) was chosen to formulate an FFS containing salicylic acid (SA) and methyl salicylate (MS). This unique combination is advantageous from a therapeutic point of view, as it enabled modified salicylate release. It is beneficial from a technological perspective too, because it improved thermal, rheological, and adhesive properties of the in situ film. DSC revealed complete dissolution of SA and good miscibility of MS with the polymer. MS also ensures optimal viscoelastic and adhesive properties of the film, leading to prolonged and sustained drug release. The hydrolysis of MS to active SA was very slow at skin pH 5.5, but it apparently occurred at physiological pH 7.4. The film structure is homogeneous without cracks, unlike some commercial preparations. The dissolution study of salicylates revealed different courses in their release and the influence of MS concentration in the film. The formulated PLGA-based FFS containing 5 % SA and 10 % MS is promising for sustained and prolonged local delivery of salicylates, used mainly for keratolytic and anti-inflammatory actions and pain relief.
- MeSH
- aplikace kožní MeSH
- aplikace lokální MeSH
- chemie farmaceutická metody MeSH
- koncentrace vodíkových iontů MeSH
- kopolymer kyseliny glykolové a mléčné * chemie MeSH
- kůže metabolismus MeSH
- kyselina mléčná * chemie MeSH
- kyselina polyglykolová * chemie MeSH
- kyselina salicylová * aplikace a dávkování chemie farmakokinetika MeSH
- léky s prodlouženým účinkem MeSH
- rozpustnost MeSH
- salicylany * aplikace a dávkování chemie farmakokinetika MeSH
- systémy cílené aplikace léků * metody MeSH
- uvolňování léčiv MeSH
- Publikační typ
- časopisecké články MeSH
Drug loading into mesoporous carriers may help to improve the dissolution of poorly aqueous-soluble drugs. However, both preparation method and carrier properties influence loading efficiency and drug release. Accordingly, this study aimed to compare two preparation methods: formulation into liquisolid systems (LSS) and co-milling for their efficiency in loading the poorly soluble model drug cyclosporine A (CyA) into mesoporous magnesium aluminometasilicate Neusilin® US2 (NEU) or functionalized calcium carbonate (FCC). Scanning electron microscopy was used to visualize the morphology of the samples and evaluate the changes that occurred during the drug loading process. The solid-state characteristics and physical stability of the formulations, prepared at different drug concentrations, were determined using X-ray powder diffraction. In vitro release of the drug was evaluated in biorelevant media simulating intestinal fluid. The obtained results revealed improved drug release profiles of the formulations when compared to the milled (amorphous) CyA alone. The dissolution of CyA from LSS was faster in comparison to the co-milled formulations. Higher drug release was achieved from NEU than FCC formulations presumably due to the higher pore volume and larger surface area of NEU.
- MeSH
- difrakce rentgenového záření MeSH
- pomocné látky * MeSH
- poréznost MeSH
- rozpustnost MeSH
- voda * MeSH
- Publikační typ
- časopisecké články MeSH
There is increasing research interest in using mesoporous silica for the delivery of poorly water-soluble drugs that are stabilized in a noncrystalline form. Most research has been done on ordered silica, whereas far fewer studies have been published on using nonordered mesoporous silica, and little is known about intrinsic drug affinity to the silica surface. The present mechanistic study uses inverse gas chromatography (IGC) to analyze the surface energies of three different commercially available disordered mesoporous silica grades in the gas phase. Using the more drug-like probe molecule octane instead of nitrogen, the concept of a "drug-accessible surface area" is hereby introduced, and the effect on drug monolayer capacity is addressed. In addition, enthalpic interactions of molecules with the silica surface were calculated based on molecular mechanics, and entropic energy contributions of volatiles were estimated considering molecular flexibility. These free energy contributions were used in a regression model, giving a successful comparison with experimental desorption energies from IGC. It is proposed that a simplified model for drugs based only on the enthalpic interactions can provide an affinity ranking to the silica surface. Following this preformulation research on mesoporous silica, future studies may harness the presented concepts to guide formulation scientists.
- MeSH
- léčivé přípravky MeSH
- oxid křemičitý * chemie MeSH
- poréznost MeSH
- rozpustnost MeSH
- voda * chemie MeSH
- Publikační typ
- časopisecké články MeSH
An important feature of orodispersible tablets (ODTs) is the convenient administration of the drugs, in some cases, faster onset of action, stability maintenance, and dose precision. This work focused on the preparation of ODTs containing mannitol-based co-processed excipients Prosolv® ODT G2, Ludiflash® and Parteck® ODT in combination with tramadol, captopril, and domperidone by direct compression. Prosolv® ODT G2 showed high energy of plastic deformation due to the content of microcrystalline cellulose. Parteck® ODT provided compact tablets due to the content of granulated mannitol. All drugs decreased tensile strength, increased friability, prolonged disintegration time, and decreased the porosity of tablets. Tablets containing Prosolv® ODT G2 with captopril, domperidone, and tramadol; and Parteck® ODT with domperidone met the requirements for ODTs production, i.e., friability ≤ 1% and disintegration time ≤ 180 s, fast wetting time, high water absorption ratio, and adequate tensile strength. The disintegration time was tested using both the pharmacopeial method and the BJKSN-13 apparatus. The results indicate the significant difference between these methods, with the disintegration time being longer when tested with the BJKSN-13 instrument.
The present study focused on the more detailed characterization of chitosan-carrageenan-based matrix tablets with respect to their potential utilization for drug targeting in the intestine. The study systematically dealt with the particular stages of the dissolution process, as well as with different views of the physico-chemical processes involved in these stages. The initial swelling of the tablets in the acidic medium based on the combined microscopy-calorimetry point of view, the pH-induced differences in the erosion and swelling of the tested tablets, and the morphological characterization of the tablets are discussed. The dissolution kinetics correlated with the rheological properties and mucoadhesive behavior of the tablets are also reported, and, correspondingly, the formulations with suitable properties were identified. It was confirmed that the formation of the chitosan-carrageenan polyelectrolyte complex may be an elegant and beneficial alternative solution for the drug targeting to the intestine by the matrix tablet.
- Publikační typ
- časopisecké články MeSH
Additive manufacturing technologies are considered as a potential way to support individualized pharmacotherapy due to the possibility of the production of small batches of customized tablets characterized by complex structures. We designed five different shapes and analyzed the effect of the surface/mass ratio, the influence of excipients, and storage conditions on the disintegration time of tablets printed using the fused deposition modeling method. As model pharmaceutical active ingredients (APIs), we used paracetamol and domperidone, characterized by different thermal properties, classified into the various Biopharmaceutical Classification System groups. We found that the high surface/mass ratio of the designed tablet shapes together with the addition of mannitol and controlled humidity storage conditions turned out to be crucial for fast tablet's disintegration. As a result, mean disintegration time was reduced from 5 min 46 s to 2 min 22 s, and from 11 min 43 s to 2 min 25 s for paracetamol- and domperidone-loaded tablets, respectively, fulfilling the European Pharmacopeia requirement for orodispersible tablets (ODTs). The tablet's immediate release characteristics were confirmed during the dissolution study: over 80% of APIs were released from printlets within 15 min. Thus, this study proved the possibility of using fused deposition modeling for the preparation of ODTs.
- Publikační typ
- časopisecké články MeSH
The utilization of co-processed excipients (CPEs) represents a novel approach to the preparation of orally disintegrating tablets by direct compression. Flow, consolidation, and compression properties of four lactose-based CPEs-Cellactose® 80, CombiLac®, MicroceLac® 100, and StarLac®-were investigated using different methods, including granulometry, powder rheometry, and tablet compaction under three pressures. Due to the similar composition and the same preparation technique (spray drying), the properties of CPEs and their compacts were generally comparable. The most pronounced differences were observed in flowability, undissolved fraction after 3 min and 24 h, energy of plastic deformation (E2), ejection force, consolidation behavior, and compact friability. Cellactose® 80 exhibited the most pronounced consolidation behavior, the lowest values of ejection force, and high friability of compacts. CombiLac® showed excellent flow properties but insufficient friability, except for compacts prepared at the highest compression pressure (182 MPa). MicroceLac® 100 displayed the poorest flow properties, lower ejection forces, and the best mechanical resistance of compacts. StarLac® showed excellent flow properties, the lowest amounts of undissolved fraction, the highest ejection force values, and the worst compact mechanical resistance. The obtained results revealed that higher compression pressures need to be used or further excipients have to be added to all tested materials in order to improve the friability and tensile strength of formed tablets, except for MicroceLac® 100.
- Publikační typ
- časopisecké články MeSH
Albeit the preparation of liquisolid systems represents an innovative approach to enhance the dissolution of poorly soluble drugs, their broader utilization is still limited mainly due to the problematic conversion of the liquid into freely flowing and readily compressible powder. Accordingly, the presented study aims to determine the optimal carrier/coating material ratio (R value) for formulations based on magnesium aluminometasilicate (NUS2) loaded with polyethylene glycol 400. Four commercially available colloidal silica were used as coating materials in nine different R values (range of 5 - 100). The obtained results suggested that the higher R value leads to the superior properties of powder mixtures, such as better flowability, as well as compacts with higher tensile strength and lower friability. Moreover, it was observed that the type of coating material impacts the properties of liquisolid systems due to the different arrangement of particles in the liquisolid mixture. To confirm the noted dependency of R value and coating material type, the one- and two-way ANOVA, linear regression and principal component analysis (PCA) techniques were performed. In addition, a comparison of results with the properties of loaded NUS2 itself revealed that LSS with sufficient properties may be prepared even without the coating material.
- MeSH
- hořčík * MeSH
- oxid křemičitý * MeSH
- prášky, zásypy, pudry MeSH
- příprava léků MeSH
- rozpustnost MeSH
- tablety MeSH
- Publikační typ
- časopisecké články MeSH
Oligonucleotides (OND) represent a promising therapeutic approach. However, their instability and low intestinal permeability hamper oral bioavailability. Well-established for oral delivery, self-emulsifying drug delivery systems (SEDDS) can overcome the weakness of other delivery systems such as long-term instability of nanoparticles or complicated formulation processes. Therefore, the present study aims to prepare SEDDS for delivery of a nonspecific fluorescently labeled OND across the intestinal Caco-2 monolayer. The hydrophobic ion pairing of an OND and a cationic lipid served as an effective hydrophobization method using either dimethyldioctadecylammonium bromide (DDAB) or 1,2-dioleoyl-3-trimethylammonium propane (DOTAP). This strategy allowed a successful loading of OND-cationic lipid complexes into both negatively charged and neutral SEDDS. Subjecting both complex-loaded SEDDS to a nuclease, the negatively charged SEDDS protected about 16% of the complexed OND in contrast to 58% protected by its neutral counterpart. Furthermore, both SEDDS containing permeation-enhancing excipients facilitated delivery of OND across the intestinal Caco-2 cell monolayer. The negatively charged SEDDS showed a more stable permeability profile over 120 min, with a permeability of about 2 × 10-7 cm/s, unlike neutral SEDDS, which displayed an increasing permeability reaching up to 7 × 10-7 cm/s. In conclusion, these novel SEDDS-based formulations provide a promising tool for OND protection and delivery across the Caco-2 cell monolayer.
- Publikační typ
- časopisecké články MeSH
The potential of nanotechnology has been explored throughout fields of medicine and found its application also in immunology. Given the crucial defence role and disseminated character of the immune system, the idea of using its strength in treatment has always been very attractive. Immunomodulation is an optimisation of the immune response both in terms of immunosuppression in autoimmune disorders and immunostimulation in vaccination or cancer immunotherapy. For these purposes, a wide range of nanomaterials has been investigated to influence the immune system directly by their composition itself or indirectly as intact carriers of the active. This review attempts to refer to nanomaterials and drug delivery systems utilised to modulate the immune response. It lists various structural types of nanoparticles discussing their composition and interplay with the immune system. Throughout the literature, both novel and traditional nanoparticles were utilised. The most progressive ones extend beyond the delivery of a single substance moving towards combined drug delivery systems and stimuli-responsive formulations.
- MeSH
- imunitní systém účinky léků MeSH
- imunomodulace účinky léků MeSH
- lidé MeSH
- nanočástice chemie MeSH
- nanostruktury chemie MeSH
- systémy cílené aplikace léků metody MeSH
- zvířata MeSH
- Check Tag
- lidé MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
- přehledy MeSH
