printing direction Dotaz Zobrazit nápovědu
The utilization of 3D printing- digital light processing (DLP) technique, for the direct fabrication of microneedles encounters the problem of drug solubility in printing resin, especially if it is predominantly composed of water. The possible solution how to ensure ideal belonging of drug and water-based printing resin is its pre-formulation in nanosuspension such as nanocrystals. This study investigates the feasibility of this approach on a resin containing nanocrystals of imiquimod (IMQ), an active used in (pre)cancerous skin conditions, well known for its problematic solubility and bioavailability. The resin blend of polyethylene glycol diacrylate and N-vinylpyrrolidone, and lithium phenyl-2,4,6-trimethylbenzoylphosphinate as a photoinitiator, was used, mixed with IMQ nanocrystals in water. The final microneedle-patches had 36 cylindrical microneedles arranged in a square grid, measuring approximately 600 μm in height and 500 μm in diameter. They contained 5wt% IMQ, which is equivalent to a commercially available cream. The homogeneity of IMQ distribution in the matrix was higher for nanocrystals compared to usual crystalline form. The release of IMQ from the patches was determined ex vivo in natural skin and revealed a 48% increase in efficacy for nanocrystal formulations compared to the crystalline form of IMQ.
- Klíčová slova
- 3D printing, Dermal delivery, Imiquimod, Microneedles, Nanocrystals,
- MeSH
- 3D tisk * MeSH
- aplikace kožní MeSH
- imichimod * chemie aplikace a dávkování MeSH
- jehly * MeSH
- kožní absorpce MeSH
- kůže metabolismus MeSH
- lékové transportní systémy přístrojové vybavení MeSH
- mikroinjekce přístrojové vybavení MeSH
- nanočástice * chemie aplikace a dávkování MeSH
- polyethylenglykoly chemie aplikace a dávkování MeSH
- povidon chemie MeSH
- rozpustnost * MeSH
- uvolňování léčiv MeSH
- zvířata MeSH
- Check Tag
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- imichimod * MeSH
- poly(ethylene glycol)diacrylate MeSH Prohlížeč
- polyethylenglykoly MeSH
- povidon MeSH
3D printing seems to be the technology of the future for the preparation of metallic implants. For such applications, corrosion behaviour is pivotal. However, little is published on this topic and with inconsistent results. Therefore, we carried out a complex study in which we compared two techniques of the 3D printing technology - selective laser melting and electron beam melting. The corrosion behaviour was studied in physiological solution by standard electrochemical techniques and susceptibility to localised corrosion was estimated too. All samples showed typical passive behaviour. Localised corrosion was shown to be possible on the original as-printed surfaces. Corrosion experiments were repeated tree times. To reveal possible negative effects of 3D printing on cytocompatibility, direct in vitro tests were performed with U-2 OS cells. The cells showed good viability and proliferation, but their growth was impeded by surface unevenness. Our results suggest that both techniques are suitable for implants production. Statistical evaluation was performed by ANOVA followed by Tukey's test.
- Klíčová slova
- 3D printing, Crevice corrosion, EIS, Potentiostatic, Titanium, XPS,
- MeSH
- 3D tisk * MeSH
- koroze MeSH
- lidé MeSH
- nádorové buněčné linie MeSH
- proliferace buněk účinky léků MeSH
- slitiny MeSH
- testování materiálů * MeSH
- titan * chemie farmakologie MeSH
- viabilita buněk účinky léků MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- slitiny MeSH
- titan * MeSH
- titanium alloy (TiAl6V4) MeSH Prohlížeč
Bones represent a superb biomaterial that combines high mechanical stiffness with nutrition delivery to its osteocyte cells through the microscopical Haversian canals and bone canaliculi. Such a structure is hard to reproduce artificially, though. 3D printing delivers an unprecedented shape control of the created objects. Yet the resolution limit of the most common 3D printers is insufficient, lying between tens to hundreds of microns, while more precise 3D printing techniques fail in fabricating larger objects. We present a unique, yet simple and versatile method for preparing hierarchically aligned microporous canals using a biocompatible polymer polylactic acid (PLA) with their structure controlled at the submicron to macro scale. The layout was inspired by the microscopical Haversian canals and bone canaliculi of cortical bone. This procedure takes advantage of the PLA complex crystalline behavior, which was pre-oriented by 3D printing, orientedly crystallized in CO2, foamed, and cryo-shrunk. The canal formation was assessed via WAXS, FTIR spectroscopy, and DSC and complemented by the evaluation of mechanical properties, biocompatibility, and directionally selective capillary transport in the final structure. The fine dimensions of the canals unmatched by the common 3D printing techniques capable of making macroscale objects combined with the abovementioned properties represent promising potential for various applications, such as advanced cell-supporting designs with a built-in nutrition function.
Three-dimensional (3D) printing technology offers attractive possibilities for many fields. In electrochemistry, 3D printing technology has been used to fabricate customized 3D-printed electrodes as a platform to develop bio/sensing, energy generation and storage devices. Here, we use a 3D-printed graphene/polylactic (PLA) electrode made by additive manufacturing technology and immobilize horseradish peroxidase (HRP) to create a direct electron transfer enzyme-based biosensors for hydrogen peroxide detection. Gold nanoparticles are included in the system to confirm and facilitate heterogeneous electron transfer. This work opens a new direction for the fabrication of third-generation electrochemical biosensors using 3D printing technology, with implications for applications in the environmental and biomedical fields.
- Klíčová slova
- 3D-printed electrodes, Direct electron transfer, Graphene/polylactic acid, Horseradish peroxidase,
- MeSH
- 3D tisk * MeSH
- biosenzitivní techniky * MeSH
- enzymy chemie genetika izolace a purifikace MeSH
- grafit chemie MeSH
- transport elektronů genetika MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- enzymy MeSH
- grafit MeSH
UNLABELLED: The aim of this study was to create a 3D printing material with bioactive properties that potentially could be used for a transparent removable orthodontic appliance. MATERIALS AND METHODS: To acrylic monomers, four bioactive glasses at 10% concentration were added, which release Ca, P, Si and F ions. The materials were printed on a 3D printer and tested for flexural strength (24 h and 30 days), sorption and solubility (7 days), ion release to artificial saliva pH = 4 and 7 (42 days) and cytotoxicity in the human fibroblast model. The released ions were determined by plasma spectrometry (Ca, P and Si ions) and ion-selective electrode (F measurement)s. RESULTS: The material obtained released Ca2+ and PO43- ions for a period of 42 days when using glass Biomin C at pH 4. The flexural strength depended on the direction in which the sample was printed relative to the 3D printer platform. Vertically printed samples had a resistance greater than 20%. The 10% Biomin C samples post-cured for 30 min with light had a survival rate of the cells after 72 h of 85%. CONCLUSIONS: Material for 3D printing with bioactive glass in its composition, which releases ions, can be used in the production of orthodontic aligners.
- Klíčová slova
- 3D printing, bioactive glass, ion release, mechanical properties,
- Publikační typ
- časopisecké články MeSH
Inkjet printing of liquid crystal (LC) microlens arrays is particularly appealing for the development of switchable 2D/3D organic light-emitting diode (OLED) displays, as the printing process ensures that the lenses can be deposited directly and on-demand onto the pixelated OLED layer without the need for additional steps, thus simplifying fabrication complexity. Even if different fabrication technologies have been employed and good results in LC direct printing have already been achieved, all the systems used require costly equipment and heated nozzles to reduce the LC solution's viscosity. Here, we present the direct printing of a nematic LC (NLC) lens by a Drop-on-Demand (DoD) inkjet printing by a pyro-electrohydrodynamic effect for the first time. The method works at ambient temperature and avoids dispensing nozzles, thus offering a noncontact manipulation approach of liquid with high resolution and good repeatability on different kinds of substrates. NLC microlenses are printed on different substrates and fully characterized. Polarization properties are evaluated for various samples, i.e., NLC lenses on unaligned and indium-tin oxide (ITO) aligned. Moreover, an in-depth characterization of the NLC lenses is reported by polarized optical microscopy and by analyzing the birefringence in digital holographic microscopy.
- Klíčová slova
- inkjet printing, liquid crystal, microlenses, polarized optical microscope, pyro-electrohydrodynamic,
- Publikační typ
- časopisecké články MeSH
In this work, we used an AlSi10Mg alloy produced by selective laser melting (SLM) to study the effects of build direction and deformation temperature on the grain refinement process. Two different build orientations of 0° and 90° and deformation temperatures of 150 °C and 200 °C were selected to study this effect. Light microscopy, electron backscatter diffraction and transmission electron microscopy were used to investigate the microtexture and microstructural evolution of the laser powder bed fusion (LPBF) billets. Grain boundary maps showed that the proportion of low-angle grain boundaries (LAGBs) dominated in every analysed sample. It was also found that different thermal histories caused by the change in build direction resulted in microstructures with different grain sizes. In addition, EBSD maps revealed heterogeneous microstructures comprising equiaxed fine-grained zones with ≈0.6 μm grain size and coarse-grained zones with ≈10 μm grain size. From the detailed microstructural observations, it was found that the formation of a heterogeneous microstructure is closely related to the increased fraction of melt pool borders. The results presented in this article confirm that the build direction has a significant influence on the microstructure evolution during the ECAP process.
- Klíčová slova
- AlSi10Mg, ECAP, build direction, grain refinement, microstructural characterization,
- Publikační typ
- časopisecké články MeSH
The presented text deals with research into the influence of the printing layers' orientation on crack propagation in an AlSi10Mg material specimen, produced by additive technology, using the Direct Metal Laser Sintering (DMLS) method. It is a method based on sintering and melting layers of powder material using a laser beam. The material specimen is presented as a Compact Tension test specimen and is printed in four different defined orientations (topology) of the printing layers-0°, 45°, 90°, and twice 90°. The normalized specimen is loaded cyclically, where the crack length is measured and recorded, and at the same time, the crack growth rate is determined. The evaluation of the experiment shows an apparent influence of the topology, which is essential especially for possible use in the design and technical preparation of the production of real machine parts in industrial practice. Simultaneously with the measurement results, other influencing factors are listed, especially product postprocessing and the measurement method used. The hypothesis of crack propagation using Computer Aided Engineering/Finite Element Method (CAE/FEM) simulation is also stated here based on the achieved results.
- Klíčová slova
- AlSi10Mg, DMLS, compact tension specimen, crack, cyclic loading, fatigue, printing topology,
- Publikační typ
- časopisecké články MeSH
Metal powders for additive manufacturing are expensive, and producing new ones from mined metals has a negative ecological impact. In this work, recycled and reused metal powders from MS1 steel for direct metal laser sintering (DMLS) 3D printing were evaluated in the laboratory. The powders were recycled by melting followed by gas atomizing. Virgin, recycled, and reused metal powders were evaluated using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), metallography analysis, microhardness measurements, particle size distribution (PSD), shape factor by digital image processing (DIP), and flowability testing. The results showed that the particle distribution was modified after recycling. Kurtosis analysis revealed a reduction from -0.64 for virgin powders to -1.29 for recycled powders. The results demonstrated a positive skewness, indicating that the recycled powder contained a greater proportion of smaller particles. The shape factor was also modified and changed from 1.57 for virgin powders to 1.28 for recycled powders. The microstructure also changed, and austenite was found in the recycled powders. The microhardness of recycled powder decreased by 39% compared to the virgin powder. Recycled powders did not flow, using two different funnels to evaluate their flowability. The flowability of used powder was reduced from 4.3 s to 2.9 s.
- Klíčová slova
- 3D printing, DMLS, MS1, additive manufacturing, metal powders, recycling,
- Publikační typ
- časopisecké články MeSH
2D nanomaterials (2DNMs) possess fascinating properties and are found in multifarious devices and applications including energy storage devices, new generation of battery technologies, sensor devices, and more recently in biomedical applications. Their use in biomedical applications such as tissue engineering, photothermal therapy, neural regeneration, and drug delivery has opened new horizons in treatment of age-old ailments. It is also a rapidly developing area of advanced research. A new approach of integrating 3D printing (3DP), a layer-by-layer deposition technique for building structures, along with 2DNM multifunctional inks, has gained considerable attention in recent times, especially in biomedical applications. With the ever-growing demand in healthcare industry for novel, efficient, and rapid technologies for therapeutic treatment methods, 3DP structures of 2DNMs provide vast scope for evolution of a new generation of biomedical devices. Recent advances in 3DP structures of dispersed 2DNM inks with established high-performance biomedical properties are focused on. The advantages of their 3D structures, the sustainable formulation methods of such inks, and their feasible printing methods are also covered. Subsequently, it deals with the therapeutic applications of some already researched 3DP structures of 2DNMs and concludes with highlighting the challenges as well as the future directions of research in this area.
- Klíčová slova
- 2D nanomaterials, 3D printing, biomedical applications, ink formulation, tissue engineering,
- MeSH
- 3D tisk MeSH
- inkoust * MeSH
- lékové transportní systémy MeSH
- nanostruktury * MeSH
- tkáňové inženýrství MeSH
- Publikační typ
- časopisecké články MeSH
- přehledy MeSH
