recyklace vody Dotaz Zobrazit nápovědu
Článek popisuje zdroje šedé vody a její kvalitu po stránce fyzikální, chemické a mikrobiologické. Popisuje způsoby nepitného užití vyčištěné šedé vody v budovách a s nimi spojené expoziční cesty nákazy. Charakterizuje možná zdravotní rizika při ingesci, inhalaci a dermálním kontaktu. Závěrem jsou diskutována potřebná opatření k ochraně veřejného zdraví, která v ČR dosud chybí. Jako nejvhodnější se jeví kombinace požadavků na kvalitu vyčištěné vody pro různé způsoby užití s požadavky na účinnost technologie čištění ve smyslu logaritmické redukce referenčních patogenů a doporučení uživatelům ohledně bezpečného chování při užití této vody.
The paper describes the sources of greywater and its physical, chemical, and microbiological quality. The list of different non-potable uses of treated greywater in buildings and related exposure pathways of infections are provided. Possible health risks stemmed from ingestion, inhalation or dermal contact are characterised. Finally, required measures needed to protect public health, which have been missing in Czechia so far, are discussed. A combination of water quality standards for different ways of use, requirements for log reduction of reference pathogens of treatment technologies, and recommendations for end-users on safety behaviour seems to be the most efficient approach.
- Klíčová slova
- šedá voda, recyklace vody,
- MeSH
- čištění vody MeSH
- environmentální zdraví MeSH
- hodnocení rizik MeSH
- kvalita vody MeSH
- lidé MeSH
- odpadní voda * analýza toxicita MeSH
- recyklace MeSH
- zásobování vodou MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- práce podpořená grantem MeSH
- přehledy MeSH
V posledních několika letech rezonuje čím dál tím více jak českou, tak i evropskou krajinou téma recyklace vod. To je spojeno především s několika faktory, které souvisí se zajištěním kvantity a kvality zdrojů vod pro pitné účely, dále pak se šetrným hospodařením s vodou, kdy ne všechna odvětví musí ke svému provozu spotřebovávat pitnou vodu a s nepředvídatelnými změnami vodního režimu až po odezvu na stále častější období sucha. Vzestup trendu recyklace vody dosvědčuje i fakt, že její celosvětová produkce a využití přesahuje již 30 milionů m3 za den.
- Klíčová slova
- recyklace vody,
- MeSH
- čištění vody * MeSH
- hasicí systémy MeSH
- lidé MeSH
- požáry * MeSH
- voda MeSH
- Check Tag
- lidé MeSH
- Geografické názvy
- Česká republika MeSH
25 stran : ilustrace, tabulky ; 30 cm
Směrnice ISO, které se zaměřují posuzování zdravotních rizik spojených s čištěním a recyklací vod k nepitným účelům.
- MeSH
- čištění vody normy MeSH
- hodnocení rizik normy MeSH
- recyklace MeSH
- znečištění vody MeSH
- Publikační typ
- směrnice MeSH
- Konspekt
- Metrologie. Standardizace
- NLK Obory
- environmentální vědy
- veřejné zdravotnictví
30 stran : ilustrace, tabulky ; 30 cm
Směrnice ISO, které se zaměřují na filtraci a použití vyčištěné šedé vody v budovách.
- MeSH
- bydlení MeSH
- filtrace MeSH
- kvalita vody MeSH
- odpadní voda MeSH
- recyklace MeSH
- voda normy MeSH
- zásobování vodou MeSH
- Publikační typ
- směrnice MeSH
- Konspekt
- Metrologie. Standardizace
- NLK Obory
- environmentální vědy
- technika
35 stran : ilustrace, tabulky ; 30 cm
Směrnice ISO, které se zaměřují na filtraci a použití vyčištěné srážkové vody v budovách.
- MeSH
- bydlení MeSH
- déšť MeSH
- filtrace MeSH
- kvalita vody MeSH
- odpadní vody MeSH
- recyklace MeSH
- voda normy MeSH
- zásobování vodou MeSH
- Publikační typ
- směrnice MeSH
- Konspekt
- Metrologie. Standardizace
- NLK Obory
- environmentální vědy
- technika
Outflows from secondary stages of conventional me-chanical-biological wastewater treatment plants (WWTPs) still contain significant concentrations of faecal pollution indicators suggesting the potential presence of pathogenic organisms. The decrease in the concentration of somatic coliphages and bacterial indicators of faecal pollution during the technological stages (coagulation, sand filtra-tion, membrane ultrafiltration, sorption on granular acti-vated carbon, disinfection, accumulation) of a semi-operational plant designed for multi-stage tertiary treat-ment or rather recycling of treated wastewater was moni-tored and discussed. During the tertiary treatment, faecal bacteria indicators were better removed than somatic coliphages, hence the inclusion of somatic indicators among faecal pollution indicators in water quality control for reuse is entirely appropriate. Subsequent tertiary treat-ment, including disinfection, is essential for safe reuse of treated water.
Blast furnace and converter sludges are fine-grained waste materials characterized as dangerous waste with a negative impact on the environment. One way of recycling of such materials is briquetting followed by reuse of the material in the blast furnace. In the briquetting process, an important step is the choice of the binder suitable for manufacturing the briquettes with suitable mechanical properties. In this work, the effect of the binder choice (laundry starch UNIPRET, Portland cement) on the reduction of iron oxides in the assessed waste materials during thermal treatment (900, 1000, 1100 °C) is evaluated. Simultaneously, the effect of the binder choice on the amount and composition of the resulting waste gas was evaluated as well as its possible impact on the environment. The performed experiments proved the mutual relationship between the level of iron oxides to metal iron conversion, the binder content and retention temperature. Type of binder also affected the volume of the resulting waste gas. Factor analysis for mixed data (FAMD) proved that the resulting concentrations of the assessed hydrocarbons were correlated (apart from ethyne) and that they are closely associated with the binder applied. Conversely, the concentrations of ethyne, carbon monoxide and carbon dioxide were not associated with the binder but with the retention temperature. FAMD did not show any direct effect of final retention temperature on the amount of the rest of the resulting hydrocarbons. In comparison with the starch-containing briquettes, the cement-containing briquettes were also proved to lead to lower resulting concentrations of PAHs in the waste gas.
- MeSH
- konstrukční materiály MeSH
- kovy MeSH
- odpadní vody * MeSH
- recyklace * MeSH
- teplota MeSH
- Publikační typ
- časopisecké články MeSH
39 stran : ilustrace, tabulky ; 30 cm
Směrnice ISO, které se zaměřují na filtraci a použití vyčištěné šedé a srážkové vody v budovách.
- MeSH
- bydlení MeSH
- déšť MeSH
- filtrace MeSH
- kvalita vody MeSH
- odpadní voda MeSH
- recyklace MeSH
- voda normy MeSH
- zásobování vodou MeSH
- Publikační typ
- směrnice MeSH
- Konspekt
- Metrologie. Standardizace
- NLK Obory
- environmentální vědy
- technika
Steel plants generate significant amounts of wastes such as sludge, slag, and dust. Blast furnace sludge is a fine-grained waste characterized as hazardous and affecting the environment negatively. Briquetting is one of the possible ways of recycling of this waste while the formed briquettes serve as a feed material to the blast furnace. Several binders, both organic and inorganic, had been assessed, however, only the solid product had been analysed. The aim of this study was to assess the possibilities of briquetting using commonly available laundry starch as a binder while evaluating the possible utilization of the waste gas originating from the thermal treatment of the briquettes. Briquettes (100g) were formed with the admixture of starch (UNIPRET) and their mechanical properties were analysed. Consequently, they were subjected to thermal treatment of 900, 1000 and 1100°C with retention period of 40min during which was the waste gas collected and its content analysed using gas chromatography. Dependency of the concentration of the compounds forming the waste gas on the temperature used was determined using Principal component analysis (PCA) and correlation matrix. Starch was found to be a very good binder and reduction agent, it was confirmed that metallic iron was formed during the thermal treatment. Approximately 20l of waste gas was obtained from the treatment of one briquette; main compounds were methane and hydrogen rendering the waste gas utilizable as a fuel while the greatest yield was during the lowest temperatures. Preparation of blast furnace sludge briquettes using starch as a binder and their thermal treatment represents a suitable method for recycling of this type of metallurgical waste. Moreover, the composition of the resulting gas is favourable for its use as a fuel.
- MeSH
- analýza hlavních komponent MeSH
- biomasa MeSH
- biopaliva * MeSH
- chromatografie plynová MeSH
- difrakce rentgenového záření MeSH
- elektronová mikroskopie MeSH
- kovy chemie MeSH
- mechanický stres MeSH
- ocel chemie MeSH
- odpadky - odstraňování metody MeSH
- odpadní vody analýza MeSH
- plyny * MeSH
- prach MeSH
- průmyslový odpad MeSH
- recyklace metody MeSH
- spektrometrie rentgenová emisní MeSH
- vysoká teplota MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH