Lead-free halide double perovskite (HDP) Cs2AgBiBr6 has set a benchmark for research in HDP photoelectric applications due to its attractive optoelectronic properties. However, its narrow absorption range is a key limitation of this material. Herein, a novel dopant, palladium (Pd), is doped into Cs2AgBiBr6 and significantly extends the absorption to ≈1400 nm. Pd2+ ions are partially doped in the host lattice, most probably replacing Ag atoms and introducing a sub-bandgap state within the host bandgap, as indicated by the combination of spectroscopical measurements and theoretical calculations. Importantly, this sub-bandgap state extends the photoresponse of Cs2AgBiBr6 up to the NIR-II region of 1300 nm, setting a new record for HDPs. This work demonstrates a novel and efficient dopant for HDPs and highlights the effectiveness of employing a sub-bandgap to broaden the absorption of HDPs, shedding new light on tailoring large bandgap HDPs for NIR optoelectronic applications.
- Klíčová slova
- Cs2AgBiBr6, NIR light response, Pd doping, double perovskites, sub‐bandgap,
- Publikační typ
- časopisecké články MeSH
In this article, we report a series of functionalized polyacetylene-type networks formed by chain-growth insertion coordination polymerization in high internal phase emulsions (HIPEs). All polymerized HIPEs (polyHIPEs) contain a hierarchically structured, 3D-interconnected porous framework consisting of a micro-, meso- and macropore system, resulting in exceptionally high specific surface areas (up to 1055 m2·g-1) and total porosities of over 95%. The combination of π-conjugated and hierarchically porous structure in one material enabled the use of these polyacetylene polyHIPEs as adsorptive photocatalysts for the removal of chemical contaminants from water. All polyacetylene polyHIPEs demonstrated high efficiency in the adsorption of bisphenol A from water (up to 48%) and the subsequent photocatalytic degradation. Surprisingly, high adsorption capacity did not affect the photocatalytic efficiency (up to 58%). On the contrary, this dual function seems to be very promising, as some polyacetylene polyHIPEs almost completely removed bisphenol A from water (97%) through the adsorption-photooxidation mechanism. It also appears that the presence of polar functional side groups in the polyacetylene backbone improves the contact of the polyacetylene network with the aqueous bisphenol A solution, which can thus be more easily adsorbed and subsequently oxidized, compensating for the lower specific surface area of some networks, namely, 471 and 308 m2·g-1 in the case of 3-ethynylphenol- and 3-ethynylaniline-based polyacetylene polyHIPEs, respectively.
- Publikační typ
- časopisecké články MeSH
Knowledge of reliable geometries and associated intermolecular interaction energy (ΔE) values at key fragments of the potential energy surface (PES) in the gas phase is indispensable for the modeling of various properties of the pyrene dimer (PYD) and other important aggregate systems of a comparatively large size (ca. 50 atoms). The performance of the domain-based local pair natural orbital (DLPNO) variant of the coupled-cluster theory with singles, doubles and perturbative triples in the complete basis set limit [CCSD(T)/CBS] method for highly accurate predictions of the ΔE at a variety of regions of the PES was established for a representative set of pi-stacked dimers, which also includes the PYD. For geometries with the distance between stacked monomers close to a value of such a distance in the ΔE minimum structure, an excellent agreement between the canonical CCSD(T)/CBS results and their DLPNO counterparts was found. This finding enabled us to accurately characterize the lowest-lying configurations of the PYD, and the physical origin of their stabilization was thoroughly analyzed. The proposed DLPNO-CCSD(T)/CBS procedure should be applied with the aim of safely locating a global minimum of the PES and firmly establishing the pertaining ΔE of even larger dimers in studies of packing motifs of organic electronic devices and other novel materials.
- Klíčová slova
- CCSD(T), DLPNO, intermolecular interactions, potential energy surfaces, pyrene dimer,
- MeSH
- dimerizace * MeSH
- molekulární modely MeSH
- pyreny * chemie MeSH
- termodynamika MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- pyrene MeSH Prohlížeč
- pyreny * MeSH
The benzene dimer (BD) is an archetypal model of π∙∙∙π and C-H∙∙∙π noncovalent interactions as they occur in its cofacial and perpendicular arrangements, respectively. The enthalpic stabilization of the related BD structures has been debated for a long time and is revisited here. The revisit is based on results of computations that apply the coupled-cluster theory with singles, doubles and perturbative triples [CCSD(T)] together with large basis sets and extrapolate results to the complete basis set (CBS) limit in order to accurately characterize the three most important stationary points of the intermolecular interaction energy (ΔE) surface of the BD, which correspond to the tilted T-shaped (TT), fully symmetric T-shaped (FT) and slipped-parallel (SP) structures. In the optimal geometries obtained by searching extensive sets of the CCSD(T)/CBS ΔE data of the TT, FT and SP arrangements, the resulting ΔE values were -11.84, -11.34 and -11.21 kJ/mol, respectively. The intrinsic strength of the intermolecular bonding in these configurations was evaluated by analyzing the distance dependence of the CCSD(T)/CBS ΔE data over wide ranges of intermonomer separations. In this way, regions of the relative distances that favor BD structures with either π∙∙∙π or C-H∙∙∙π interactions were found and discussed in a broader context.
- Klíčová slova
- CCSD(T), SAPT, interaction energy, intermolecular stacking, noncovalent interactions,
- MeSH
- benzen * chemie MeSH
- dimerizace * MeSH
- kvantová teorie MeSH
- molekulární modely MeSH
- termodynamika MeSH
- vodíková vazba MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- benzen * MeSH
The permeation of small molecules across biological membranes is a crucial process that lies at the heart of life. Permeation is involved not only in the maintenance of homeostasis at the cell level but also in the absorption and biodistribution of pharmacologically active substances throughout the human body. Membranes are formed by phospholipid bilayers that represent an energy barrier for permeating molecules. Crossing this energy barrier is assumed to be a singular event, and permeation has traditionally been described as a first-order kinetic process, proportional only to the concentration gradient of the permeating substance. For a given membrane composition, permeability was believed to be a unique property dependent only on the permeating molecule itself. We provide experimental evidence that this long-held view might not be entirely correct. Liposomes were used in copermeation experiments with a fluorescent probe, where simultaneous permeation of two substances occurred over a single phospholipid bilayer. Using an assay of six commonly prescribed drugs, we have found that the presence of a copermeant can either enhance or suppress the permeation rate of the probe molecule, often more than 2-fold in each direction. This can have significant consequences for the pharmacokinetics and bioavailability of commonly prescribed drugs when used in combination and provide new insight into so-far unexplained drug-drug interactions as well as changing the perspective on how new drug candidates are evaluated and tested.
- Klíčová slova
- drug interaction, fluorescence quenching, liposomes, partitioning coefficient, permeability,
- MeSH
- buněčná membrána metabolismus MeSH
- fluorescenční barviva farmakokinetika chemie MeSH
- fosfolipidy chemie MeSH
- léky na předpis farmakokinetika chemie MeSH
- lidé MeSH
- lipidové dvojvrstvy metabolismus MeSH
- liposomy * chemie MeSH
- permeabilita MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- fluorescenční barviva MeSH
- fosfolipidy MeSH
- léky na předpis MeSH
- lipidové dvojvrstvy MeSH
- liposomy * MeSH
Porous aluminosilicates are functional materials of paramount importance as Lewis acid catalysts in the synthetic industry, yet the participating aluminum species remain poorly studied. Herein, a series of model aluminosilicate networks containing [L-AlO3] (L = THF, Et3N, pyridine, triethylphosphine oxide (TEPO)) and [AlO4]- centers were prepared through nonhydrolytic sol-gel condensation reactions of the spherosilicate building block (Me3Sn)8Si8O20 with L-AlX3 (X = Cl, Me, Et) and [Me4N] [AlCl4] compounds in THF or toluene. The substoichiometric dosage of the Al precursors ensured complete condensation and uniform incorporation, with the bulky spherosilicate forcing a separation between neighboring aluminum centers. The materials were characterized by 1H, 13C, 27Al, 29Si, and 31P MAS NMR and FTIR spectroscopies, ICP-OES, gravimetry, and N2 adsorption porosimetry. The resulting aluminum centers were resolved by 27Al TQ/MAS NMR techniques and assigned based on their spectroscopic parameters obtained by peak fitting (δiso, CQ, η) and their correspondence to the values calculated on model structures by DFT methods. A clear correlation between the decrease in the symmetry of the Al centers and the increase of the observed CQ was established with values spanning from 4.4 MHz for distorted [AlO4]- to 15.1 MHz for [THF-AlO3]. Products containing exclusively [TEPO-AlO3] or [AlO4]- centers could be obtained (single-site materials). For L = THF, Et3N, and pyridine, the [AlO4]- centers were formed together with the expected [L-AlO3] species, and a viable mechanism for the unexpected emergence of [AlO4]- was proposed.
- Publikační typ
- časopisecké články MeSH
Recently, suitably sized polymer-based nanogels containing functional groups for the binding of biologically active substances and ultimately degradable to products that can be removed by glomerular filtration have become extensively studied systems in the field of drug delivery. Herein, we designed and tailored the synthesis of hydrophilic and biodegradable poly[N-(2-hydroxypropyl) methacrylamide-co-N,N'-bis(acryloyl) cystamine-co-6-methacrylamidohexanoyl hydrazine] (PHPMA-BAC-BMH) nanogels. The facile and versatile dispersion polymerization enabled the preparation of nanogels with a diameter below 50 nm, which is the key parameter for efficient and selective passive tumor targeting. The effects of the N,N'-bis(acryloyl) cystamine crosslinker, polymerization composition, and medium including H2O/MetCel and H2O/EtCel on the particle size, particle size distribution, morphology, and polymerization kinetics and copolymer composition were investigated in detail. We demonstrated the formation of a 38 nm colloidally stable PHPMA-BAC-BMH nanogel with a core-shell structure that can be rapidly degraded in the presence of 10 mM glutathione solution under physiologic conditions. The nanogels were stable in an aqueous solution modeling the bloodstream; thus, these nanogels have the potential to become highly important carriers in the drug delivery of various molecules.
- Klíčová slova
- N-(2-hydroxypropyl) methacrylamide, biodegradable, dispersion polymerization, glutathione, nanogel,
- Publikační typ
- časopisecké články MeSH
Accurate estimates of intermolecular interaction energy, ΔE, are crucial for modeling the properties of organic electronic materials and many other systems. For a diverse set of 50 dimers comprising up to 50 atoms (Set50-50, with 7 of its members being models of single-stacking junctions), benchmark ΔE data were compiled. They were obtained by the focal-point strategy, which involves computations using the canonical variant of the coupled cluster theory with singles, doubles, and perturbative triples [CCSD(T)] performed while applying a large basis set, along with extrapolations of the respective energy components to the complete basis set (CBS) limit. The resulting ΔE data were used to gauge the performance for the Set50-50 of several density-functional theory (DFT)-based approaches, and of one of the localized variants of the CCSD(T) method. This evaluation revealed that (1) the proposed "silver standard" approach, which employs the localized CCSD(T) method and CBS extrapolations, can be expected to provide accuracy better than two kJ/mol for absolute values of ΔE, and (2) from among the DFT techniques, computationally by far the cheapest approach (termed "ωB97X-3c/vDZP" by its authors) performed remarkably well. These findings are directly applicable in cost-effective yet reliable searches of the potential energy surfaces of noncovalent complexes.
- Klíčová slova
- CCSD(T), DFT, interaction energy, noncovalent interactions, supramolecular junctions,
- MeSH
- dimerizace MeSH
- elektronika * MeSH
- fyzikální jevy MeSH
- polymery MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- polymery MeSH
The 1,8-bis(dimethylamino)naphthalenium ([PSH]+) decaborane salt, [PSH][B10H13], has been found to react in ethanol to form [PSH][B9H14] (1), affording a simple route to the synthesis of the arachno-nonaborate anion. This new polyhedral salt is characterized by NMR spectroscopy and X-ray diffraction. The measurement of diffusion coefficients by NMR methods demonstrates that the [PSH]+ cation and the [B9H14]- anion form ion pairs in a non-coordinating solvent such as CH2Cl2, whereas in CD3CN the formation of ion pairs was not observed. Insights into the long-known low-energy dynamic behavior, which involves the bridging and endo-terminal hydrogen atoms, are elucidated using DFT calculations. Salts [PSH][B9H14] (1) and [PSH][B9H14]·0.5CHCl3 (solvated, 1·0.5CHCl3) have also been studied by X-ray diffraction analysis. A solid-state NMR study has demonstrated that K[B9H14] and [PSH][B9H14] (1) undergo significantly different motion regimes, being a low-energy, weakly temperature-dependent process for 1, which may be ascribed to some type of low-amplitude reorientation of the whole boron cages. This process may be the mechanism for the low- to-room-temperature order-disorder hidden transition found by X-ray analysis.
- Publikační typ
- časopisecké články MeSH
There have been attempts, both experimental and based on density-functional theory (DFT) modeling, at understanding the factors that govern the electronic conductance behavior of single-stacking junctions formed by pi-conjugated materials in nanogaps. Here, a reliable description of relevant stacked configurations of some thiophene-cored systems is provided by means of high-level quantum chemical approaches. The minimal structures of these configurations, which are found using the dispersion-corrected DFT approach, are employed in calculations that apply the coupled cluster method with singles, doubles and perturbative triples [CCSD(T)] and extrapolations to the complete basis set (CBS) limit in order to reliably quantify the strength of intermolecular binding, while their physical origin is investigated using the DFT-based symmetry-adapted perturbation theory (SAPT) of intermolecular interactions. In particular, for symmetrized S-Tn dimers (where "S" and "T" denote a thiomethyl-containing anchor group and a thiophene segment comprising "n" units, respectively), the CCSD(T)/CBS interaction energies are found to increase linearly with n ≤ 6, and significant conformational differences between the flanking 2-thiophene group in S-T1 and S-T2 are described by the CCSD(T)/CBS and SAPT/CBS computations. These results are put into the context of previous work on charge transport properties of S-Tn and other types of supramolecular junctions.
- Klíčová slova
- CCSD(T), DFT, intermolecular stacking, oligothiophenes, supramolecular junctions,
- MeSH
- elektronika * MeSH
- polymery * MeSH
- thiofeny MeSH
- virion MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- polymery * MeSH
- thiofeny MeSH
