Polymer-based membranes represent an irreplaceable group of materials that can be applied in a wide range of key industrial areas, from packaging to high-end technologies. Increased selectivity to transport properties or the possibility of controlling membrane permeability by external stimuli represents a key issue in current material research. In this work, we present an unconventional approach with the introduction of silver nanoparticles (AgNPs) into membrane pores, by immobilising them onto the surface of polyethyleneterephthalate (PET) foil with subsequent physical modification by means of laser and plasma radiation prior to membrane preparation. Our results showed that the surface characteristics of AgNP-decorated PET (surface morphology, AgNP content, and depth profile) affected the distribution and concentration of AgNPs in subsequent ion-track membranes. We believe that the presented approach affecting the redistribution of AgNPs in the polymer volume may open up new possibilities for the preparation of metal nanoparticle-filled polymeric membranes. The presence of AgNPs on the pore walls can facilitate the grafting of stimuli-responsive molecules onto these active sites and may contribute to the development of intelligent membranes with controllable transport properties.
- Klíčová slova
- immobilisation, ion-track membrane, laser, physical modification, polymer, silver nanoparticle,
- MeSH
- jaderný pór MeSH
- kovové nanočástice * MeSH
- polymery MeSH
- pozitronová emisní tomografie MeSH
- stříbro MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- polymery MeSH
- stříbro MeSH
In the case of polymer medical devices, the surface design plays a crucial role in the contact with human tissue. The use of AgNPs as antibacterial agents is well known; however, there is still more to be investigated about their anchoring into the polymer surface. This study describes the changes in the surface morphology and behaviour in the biological environment of polyetheretherketone (PEEK) with immobilised AgNPs after different surface modifications. The initial composites were prepared by immobilising silver nanoparticles from a colloid solution in the upper surface layers of polyetheretherketone (PEEK). The prepared samples (Ag/PEEK) had a planar morphology and were further modified with a KrF laser, a GaN laser, and an Ar plasma. The samples were studied using the AFM method to visualise changes in surface morphology and obtain information on the height of the structures and other surface parameters. A comparative analysis of the nanoparticles and polymers was performed using FEG-SEM. The chemical composition of the surface of the samples and optical activity were studied using XPS and UV-Vis spectroscopy. Finally, drop plate antibacterial and cytotoxicity tests were performed to determine the role of Ag nanoparticles after modification and suitability of the surface, which are important for the use of the resulting composite in biomedical applications.
- Klíčová slova
- antibacterial properties, biocompatibility, immobilisation, nanostructures, physical modification, polyetheretherketone,
- Publikační typ
- časopisecké články MeSH
Exceptionally fast temperature-responsive, mechanically strong, tough and extensible monolithic non-porous hydrogels were synthesized. They are based on divinyl-crosslinked poly(N-isopropyl-acrylamide) (PNIPAm) intercalated by hydroxypropyl methylcellulose (HPMC). HPMC was largely extracted after polymerization, thus yielding a 'template-modified' PNIPAm network intercalated with a modest residue of HPMC. High contents of divinyl crosslinker and of HPMC caused a varying degree of micro-phase-separation in some products, but without detriment to mechanical or tensile properties. After extraction of non-fixed HPMC, the micro-phase-separated products combine superior mechanical properties with ultra-fast T-response (in 30 s). Their PNIPAm network was highly regular and extensible (intercalation effect), toughened by hydrogen bonds to HPMC, and interpenetrated by a network of nano-channels (left behind by extracted HPMC), which ensured the water transport rates needed for ultra-fast deswelling. Moreover, the T-response rate could be widely tuned by the degree of heterogeneity during synthesis. The fastest-responsive among our hydrogels could be of practical interest as soft actuators with very good mechanical properties (soft robotics), while the slower ones offer applications in drug delivery systems (as tested on the example of Theophylline), or in related biomedical engineering applications.
- Klíčová slova
- cellulose, drug release, hydrogels, poly(N-isopropylacrylamide), semi-interpenetrating networks, smart materials,
- Publikační typ
- časopisecké články MeSH
Moronic acid and morolic acid, less frequently studied plant triterpenoids, were subjected to derivation with several structural modifiers, namely, piperazine-, pyrazine-, 1H-indole- and L-methionine-based compounds. Derivation was targeted to design and prepare novel compounds capable of nano-assembling and/or displaying cytotoxicity. Formation of nanostructures has been proven for several novel target compounds that formed different types of nanostructures, either in chloroform or in water. Isometric nanoparticles with broad size distributions (12 and 25), distorted single sheets (23) or very large thin warped films (13) were formed in chloroform solutions. Sheet-like nanostructures (12 and 23), and sphere-like nanostructures (hydrogen bonding connected nanoparticles; 3, 5, 13, 21 and 25) were formed in water suspensions. Cytotoxicity was also investigated and compared with that of the parent triterpenoids, showing enhanced effect of 18 that was the most successful derivative of the prepared series with sufficient balance between its cytotoxicity in CEM (IC50 = 11.7 ± 2.4 μM), HeLa (IC50 = 9.0 ± 0.7 μM) and G-361 (IC50 = 10.6 ± 5.5 μM) cancer cell lines, and toxicity in BJ (IC50 = 43.3 ± 1.5 μM). The calculated selectivity index values for 18 are SI = 3.9 (CEM), 4.8 (HeLa) and 4.4 (G-361). Additional compounds displaying cytotoxicity were 5, 7, 9 and 15, all of them showed comparable cytotoxicity with 18, in the investigated cancer cell lines; however, they were more toxic in BJ than 18.
- Publikační typ
- časopisecké články MeSH
Local chemotherapy using polymer drug delivery systems has the potential to treat some cancers, including intraocular retinoblastoma, which is difficult to treat with systemically delivered drugs. Well-designed carriers can provide the required drug concentration at the target site over a prolonged time, reduce the overall drug dose needed, and suppress severe side effects. Herein, nanofibrous carriers of the anticancer agent topotecan (TPT) with a multilayered structure composed of a TPT-loaded inner layer of poly(vinyl alcohol) (PVA) and outer covering layers of polyurethane (PUR) are proposed. Scanning electron microscopy showed homogeneous incorporation of TPT into the PVA nanofibers. HPLC-FLD proved the good loading efficiency of TPT (≥85%) with a content of the pharmacologically active lactone TPT of more than 97%. In vitro release experiments demonstrated that the PUR cover layers effectively reduced the initial burst release of hydrophilic TPT. In a 3-round experiment with human retinoblastoma cells (Y-79), TPT showed prolonged release from the sandwich-structured nanofibers compared with that from a PVA monolayer, with significantly enhanced cytotoxic effects as a result of an increase in the PUR layer thickness. The presented PUR-PVA/TPT-PUR nanofibers appear to be promising carriers of active TPT lactone that could be useful for local cancer therapy.
- Klíčová slova
- cytotoxicity, multilayered structure, nanofibers, needleless electrospinning, prolonged release, retinoblastoma, topotecan,
- Publikační typ
- časopisecké články MeSH
The overall need for the preparation of new medicinal radionuclides has led to the fast development of new sorption materials, extraction agents, and separation methods. Inorganic ion exchangers, mainly hydrous oxides, are the most widely used materials for the separation of medicinal radionuclides. One of the materials that has been studied for a long time is cerium dioxide, a competitive sorption material for the broadly used titanium dioxide. In this study, cerium dioxide was prepared through calcination of ceric nitrate and fully characterized using X-ray powder diffraction (XRPD), infrared spectrometry (FT-IR), scanning and transmission electron microscopy (SEM and TEM), thermogravimetric and differential thermal analysis (TG and DTA), dynamic light scattering (DLS), and analysis of surface area. In order to estimate the sorption mechanism and capacity of the prepared material, characterization of surface functional groups was carried out using acid-base titration and mathematical modeling. Subsequently, the sorption capacity of the prepared material for germanium was measured. It can be stated that the prepared material is prone to exchange anionic species in a wider range of pH than titanium dioxide. This characteristic makes the material superior as a matrix in 68Ge/68Ga radionuclide generators, and its suitability should be further studied in batch, kinetic, and column experiments.
- Klíčová slova
- FT-IR, SEM, TEM, XRPD, acid-base titration, cerium dioxide, mechanism, sorption, thermal analysis,
- Publikační typ
- časopisecké články MeSH
Morphology, macro-, and micromechanical properties of novel poly(urethane-urea)/silica nanocomposites were analyzed by electron microscopy, dynamic mechanical thermal analysis, and microindentation. The studied nanocomposites were based on a poly(urethane-urea) (PUU) matrix filled by nanosilica, and were prepared from waterborne dispersions of PUU (latex) and SiO2. The loading of nano-SiO2 was varied between 0 (neat matrix) and 40 wt% in the dry nanocomposite. The prepared materials were all formally in the rubbery state at room temperature, but they displayed complex elastoviscoplastic behavior, spanning from stiffer elastomeric type to semi-glassy. Because of the employed rigid and highly uniform spherical nanofiller, the materials are of great interest for model microindentation studies. Additionally, because of the polycarbonate-type elastic chains of the PUU matrix, hydrogen bonding in the studied nanocomposites was expected to be rich and diverse, ranging from very strong to weak. In micro- and macromechanical tests, all the elasticity-related properties correlated very strongly. The relations among the properties that related to energy dissipation were complex, and were highly affected by the existence of hydrogen bonding of broadly varied strength, by the distribution patterns of the fine nanofiller, as well as by the eventual locally endured larger deformations during the tests, and the tendency of the materials to cold flow.
- Klíčová slova
- aqueous polyurethane dispersion, mechanical properties, microindentation, nanocomposites, polyurethanes, silica,
- Publikační typ
- časopisecké články MeSH
This contribution lays the foundation for the European database of explanted UHMWPE liners from total joint replacements. Three EU countries (Czech Republic, Italy and Spain) have joined their datasets containing anonymized patient data (such as age and BMI), manufacturer data (such as information on UHMWPE crosslinking, thermal treatment and sterilization), orthopedic evaluation (such as total duration of the implant in vivo and reasons for its revision) and material characterization (such as oxidative degradation and micromechanical properties). The joined database contains more than 500 entries, exhibiting gradual growth, and it is beginning to show interesting trends, which are discussed in our contribution, including (i) strong correlations between UHMWPE oxidative degradation, degree of crystallinity and microhardness; (ii) statistically significant differences between UHMWPE liners with different types of sterilization; (iii) realistic correlations between the extent of oxidative degradation and the observed reasons for total joint replacement failures. Our final objective and task for the future is to continuously expand the database, involving researchers from other European countries, in order to create a robust tool that will contribute to the better understanding of structure-properties-performance relationships in the field of arthroplasty implants.
- Klíčová slova
- European database, UHMWPE, micromechanical properties, oxidative degradation, retrieval study, total joint replacements, ultrahigh molecular weight polyethylene,
- Publikační typ
- časopisecké články MeSH
We compared the results of various microscale indentation creep (microcreep) measurements with macroscale tensile creep (macrocreep) measurements of three common polymers: high-density polyethylene (PE), polypropylene (PP), and polystyrene (PS). The main objective was to verify if the short-term microcreep experiments could predict long-term macrocreep behavior of the selected polymers, whose properties ranged from very soft and ductile (PE) to very hard and brittle (PS). The second objective was to compare several creep predictive schemes: the empirical power law model (PL) and several types of phenomenological elasto-visco-plastic models (EVP). In order to facilitate this task, we developed a universal program package named MCREEP, which fits PL and EVP models to both tensile and indentation creep data. All experimental results and theoretical predictions documented that: (i) regardless of the creep experiment type, both micro- and macrocreep resistance increased in the following order: PE < PP < PS, (ii) the short-term microcreep experiments could be used to predict qualitatively the long-term macrocreep behavior, and (iii) the simple empirical power law model yielded better predictions of long-term creep behavior than the more sophisticated elasto-visco-plastic models.
- Klíčová slova
- indentation creep, microindentation, polymers, tensile creep, viscoelasticity,
- Publikační typ
- časopisecké články MeSH
Metal nanostructure-treated polymers are widely recognized as the key material responsible for a specific antibacterial response in medical-based applications. However, the finding of an optimal bactericidal effect in combination with an acceptable level of cytotoxicity, which is typical for metal nanostructures, prevents their expansion from being more significant so far. This study explores the possibility of firmly anchoring silver nanoparticles (AgNPs) into polyetherether ketone (PEEK) with a tailored surface morphology that exhibits laser-induced periodic surface structures (LIPSS). We demonstrated that laser-induced forward transfer technology is a suitable tool, which, under specific conditions, enables uniform decoration of the PEEK surface with AgNPs, regardless of whether the surface is planar or LIPSS structured. The antibacterial test proved that AgNPs-decorated LIPSS represents a more effective bactericidal protection than their planar counterparts, even if they contain a lower concentration of immobilized particles. Nanostructured PEEK with embedded AgNPs may open up new possibilities in the production of templates for replication processes in the construction of functional bactericidal biopolymers or may be directly used in tissue engineering applications.
- Klíčová slova
- bactericidal effect, laser treatment, periodic structures, silver nanoparticles, surface morphology,
- MeSH
- antibakteriální látky farmakologie chemie MeSH
- ketony chemie MeSH
- kovové nanočástice * chemie MeSH
- polyethylenglykoly chemie MeSH
- stříbro chemie MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- antibakteriální látky MeSH
- ketony MeSH
- polyetheretherketone MeSH Prohlížeč
- polyethylenglykoly MeSH
- stříbro MeSH