The construction of functional micro- or nanostructured surfaces is extensively studied since they are able to provide multifunctional properties and for large variety of potential applications in fields such as tissue engineering, wearable electronics or microfluidics. The micro- or nanosized surfaces can be easily prepared by various lithography techniques, also additional modifications (laser exposure, metal deposition and further processing) and which can induce new applicable properties on the basis of synergic effect by combining aforementioned approaches. In this work we have focused on the polytetrafluoroethylene (PTFE) nanotextile with specific bimetallic nanostructures. Our primary target was to find optimal surface modification of silver/gold coated surface, which would induce strong antibacterial response to both gram-positive and/or gram-negative bacteria. We have used plasma-modified polytetrafluoroethylene nanotextile as a substrate, onto which silver and gold nanolayers were deposited by sputtering. The foils were further subjected to "single-shot" exposure to an excimer KrF laser and some samples were also thermally stressed before exposure. Such surfaces were further examined in terms of surface morphology and chemical composition. The surface was investigated for antibacterial properties. Their antimicrobial activity was examined in vitro against the bacteria Escherichia coli and Staphylococcus epidermidis strains. The surface of the prepared materials was replicated into a lactic acid polymer and the properties were again investigated in terms of surface morphology and surface chemistry. The results demonstrated construction of antibacterial surfaces with excellent resistance to bacteria E. coli for bimetallic structures on PTFE. Excimer laser induced bimetallic pattern exhibited also significant antibacterial properties for S. epidermidis. Replication of bimetallic pattern was also demonstrated.

• Klíčová slova
• Antibacterial properties, Bimetallic nanopattern, Laser exposure, Nanostructure, Nanotextile, Noble metal, PTFE, Polymer, Replication,
• Publikační typ
• časopisecké články MeSH

Many bio-applicable materials, medical devices, and prosthetics combine both polymer and metal components to benefit from their complementary properties. This goal is normally achieved by their mechanical bonding or casting only. Here, we report an alternative easy method for the chemical grafting of a polymer on the surfaces of a metal or metal alloys using alkoxy amine salt as a coupling agent. The surface morphology of the created composites was studied by various microscopy methods, and their surface area and porosity were determined by adsorption/desorption nitrogen isotherms. The surface chemical composition was also examined by various spectroscopy techniques and electrokinetic analysis. The distribution of elements on the surface was determined, and the successful bonding of the metal/alloys on one side with the polymer on the other by alkoxy amine was confirmed. The composites show significantly increased hydrophilicity, reliable chemical stability of the bonding, even interaction with solvent for thirty cycles, and up to 95% less bacterial adhesion for the modified samples in comparison with pristine samples, i.e., characteristics that are promising for their application in the biomedical field, such as for implants, prosthetics, etc. All this uses universal, two-step procedures with minimal use of energy and the possibility of production on a mass scale.

• Klíčová slova
• PEG coating, alkoxy amine, bacterial adhesion, diazotization, grafting, medical devices, polymer layer, stainless steel, titanium,
• Publikační typ
• časopisecké články MeSH

This study is focused on polytetrafluoroethylene (PTFE) porous nanotextile and its modification with thin, silver sputtered nanolayers, combined with a subsequent modification with an excimer laser. The KrF excimer laser was set to single-shot pulse mode. Subsequently, the physico chemical properties, morphology, surface chemistry, and wettability were determined. Minor effects of the excimer laser on the pristine PTFE substrate were described, but significant changes were observed after the application of the excimer laser to the polytetrafluoroethylene with sputtered silver, where the formation of a silver nanoparticles/PTFE/Ag composite was described, with a wettability similar to that of a superhydrophobic surface. Both scanning electron microscopy and atomic force microscopy revealed the formation of superposed globular structures on the polytetrafluoroethylene lamellar primary structure, which was also confirmed using energy dispersive spectroscopy. The combined changes in the surface morphology, chemistry, and thus wettability induced a significant change in the PTFE's antibacterial properties. Samples coated with silver and further treated with the excimer laser 150 mJ/cm2 inhibited 100% of the bacterial strain E. coli. The motivation of this study was to find a material with flexible and elastic properties and a hydrophobic character, with antibacterial properties that could be enhanced with silver nanoparticles, but hydrophobic properties that would be maintained. These properties can be used in different types of applications, mainly in tissue engineering and the medicinal industry, where water-repellent materials may play important roles. This synergy was achieved via the technique we proposed, and even when the Ag nanostructures were prepared, the high hydrophobicity of the system Ag-polytetrafluorethylene was maintained.

• Klíčová slova
• PTFE, antibacterial properties, laser exposure, morphology, nanostructure, polymer, silver nanolayer, wettability,
• Publikační typ
• časopisecké články MeSH

In this review, we present a comprehensive summary of the formation of honeycomb microstructures and their applications, which include tissue engineering, antibacterial materials, replication processes or sensors. The history of the honeycomb pattern, the first experiments, which mostly involved the breath figure procedure and the improved phase separation, the most recent approach to honeycomb pattern formation, are described in detail. Subsequent surface modifications of the pattern, which involve physical and chemical modifications and further enhancement of the surface properties, are also introduced. Different aspects influencing the polymer formation, such as the substrate influence, a particular polymer or solvent, which may significantly contribute to pattern formation, and thus influence the target structural properties, are also discussed.

• Klíčová slova
• antibacterial properties, biopolymer, breath figure, honeycomb, improved phase separation, morphology, polymer, replication, surface modification, tissue engineering,
• Publikační typ
• časopisecké články MeSH
• přehledy MeSH

In this article, we present a unique combination of techniques focusing on the immobilization of noble metal nanoparticles into a honeycomb polystyrene pattern prepared with the improved phase-separation technique. The procedure consists of two main steps: the preparation of the honeycomb pattern (HCP) on a perfluoroethylenepropylene substrate (FEP), followed by an immobilization procedure realized by the honeycomb pattern's exposure to an excimer laser in a noble metal nanoparticle solution. The surface physico-chemical properties, mainly the surface morphology and chemistry, are characterized in detail in the study. The two-step procedure represents the unique architecture of the surface immobilization process, which reveals a wide range of potential applications, mainly in tissue engineering, but also as substrates for analytical use.

• Klíčová slova
• excimer laser, gold nanocluster, honeycomb, immobilization, morphology, nanostructure, polystyrene,
• Publikační typ
• časopisecké články MeSH

Here, we aimed at the preparation of an antibacterial surface on a flexible polydimethylsiloxane substrate. The polydimethylsiloxane surface was sputtered with silver, deposited with carbon, heat treated and exposed to excimer laser, and the combinations of these steps were studied. Our main aim was to find the combination of techniques applicable both against Gram-positive and Gram-negative bacteria. The surface morphology of the structures was determined by atomic force microscopy and scanning electron microscopy. Changes in surface chemistry were conducted by application of X-ray photoelectron spectroscopy and energy dispersive spectroscopy. The changes in surface wettability were characterized by surface free energy determination. The heat treatment was also applied to selected samples to study the influence of the process on layer stability and formation of PDMS-Ag or PDMS-C-Ag composite layer. Plasmon resonance effect was determined for as-sputtered and heat-treated Ag on polydimethylsiloxane. The heating of such structures may induce formation of a pattern with a surface plasmon resonance effect, which may also significantly affect the antibacterial activity. We have implemented sputtering of the carbon base layer in combination with excimer laser exposure of PDMS/C/Ag to modify its properties. We have confirmed that deposition of primary carbon layer on PDMS, followed by sputtering of silver combined with subsequent heat treatment and activation of such surface with excimer laser, led to the formation of a surface with strong antibacterial properties against two bacterial strains of S. epidermidis and E. coli.

• Klíčová slova
• antibacterial properties, carbon, excimer laser, nanostructure, plasmon resonance, silver nanoclusters,
• Publikační typ
• časopisecké články MeSH

In this study, we present a simple approach for developing a biocompatible polymer scaffold with a honeycomb-like micropattern. We aimed to combine a plasma treatment of fluorinated ethylene propylene (FEP) substrate with an improved phase separation technique. The plasma exposure served for modification of the polymer surface properties, such as roughness, surface chemistry, and wettability. The treated FEP substrate was applied for the growth of a honeycomb-like pattern from a solution of polymethyl methacrylate (PMMA). The properties of the pattern were strongly dependent on the conditions of plasma exposure of the FEP substrate. The physico-chemical properties of the prepared pattern, such as changes in wettability, aging, morphology, and surface chemistry, were determined. Further, we have examined the cellular response of human osteoblasts (U-2 OS) on the modified substrates. The micropattern prepared with a selected combination of surface activation and amount of PMMA for honeycomb construction showed a positive effect on U-2 OS cell adhesion and proliferation. Samples with higher PMMA content (3 and 4 g) formed more periodic hexagonal structures on the surface compared to its lower amount (1 and 2 g), which led to a significant increase in the pattern cytocompatibility compared to pristine or plasma-treated FEP.

• Klíčová slova
• FEP, PMMA, cell adhesion, cell growth, cytocompatibility, honeycomb-like pattern, material morphology, plasma modification, polymer,
• Publikační typ
• časopisecké články MeSH