Silver nanoparticles synthesized with polymers as coating agents is an effective method to overcome their poor stability and aggregation in solution. Silver-polyethylene glycol (Ag-PEG) nanoparticles were synthesized with the thiol-functionalized polyethylene glycol (SH-PEA) as the coating, reducing and stabilizing agent. The UV irradiation time, polymer and silver nitrate concentration for the synthesis were investigated. The concentration of silver nitrate had significant effect on the morphology of Ag-PEG nanoparticles. When increasing the concentration of silver nitrate, SEM and TEM images showed that Ag-PEG nanoparticles changed from Janus to multi-core shell structure. Meanwhile, pure silver particles in the two hybrid nanoparticles presented spherical shape and had the similar size of 15 nm. The antibacterial activities and cytotoxicity of the two structural Ag-PEG nanoparticles were investigated to understand colloid morphology effect on the properties of AgNPs. The results of antibacterial activities showed that the two structural Ag-PEG nanoparticles exhibited strong antibacterial activities against Staphylococcus aureus, Escherichia coli and Bacillus subtilis. The Janus nanoparticles had larger minimal inhibitory concentration (MIC) and minimum bacterial concentration (MBC) values than the multi-core shell counterparts. The results of cytotoxicity showed the Janus Ag-PEG nanoparticles had lower toxicity than the multi-core shell nanoparticles.

• Klíčová slova
• Janus nanoparticle, PEG, antibacterial activity, cytotoxicity, muli-core shell nanoparticle, silver nanoparticle,
• Publikační typ
• časopisecké články MeSH

This work is focused on preparation of novel porous type of core-shell-structured microparticles based on polylactide (shell) and poly(vinyl alcohol) cross-linked with glutaric acid (GA) (core) prepared by water-in-oil-in-water solvent evaporation technique. The microparticle systems were used as delivery systems for immobilisation of model antibacterial agent - nisin. The effect of cross-linking and the initial amount of nisin on their morphology was investigated using scanning electron microscopy, BET analysis, zeta potential measurement and Fourier transform infra-red spectroscopy. Encapsulation efficiency and release profile of nisin from the microparticles were studied by high performance liquid chromatography. Antibacterial activity of the prepared systems was tested by dilution and spread plate technique. Results showed the microparticles in the size range of 9-16 μm in diameter with spherical multi-hollow core-shell structure. The presence of cross-linking agent GA influences the release profile of the peptide and has synergistic effect on Listeria monocytogenes growth reduction.

• Klíčová slova
• Microparticles, antibacterial activity, core–shell, nisin, poly(vinyl alcohol), polylactic acid,
• MeSH
• antibakteriální látky aplikace a dávkování   MeSH
• glutaráty chemie   MeSH
• Listeria monocytogenes účinky léků   MeSH
• mikroskopie elektronová rastrovací MeSH
• nisin aplikace a dávkování   MeSH
• nosiče léků chemie   MeSH
• polyestery chemie   MeSH
• polyvinylalkohol chemie   MeSH
• poréznost MeSH
• velikost částic MeSH
• Publikační typ
• časopisecké články MeSH
• Názvy látek
• antibakteriální látky MeSH
• glutaráty MeSH
• glutaric acid MeSH Prohlížeč
• nisin MeSH
• nosiče léků MeSH
• poly(lactide) MeSH Prohlížeč
• polyestery MeSH
• polyvinylalkohol MeSH

Coherent X-ray diffraction imaging at symmetric hhh Bragg reflections was used to resolve the structure of GaAs/In0.15Ga0.85As/GaAs core-shell-shell nanowires grown on a silicon (111) substrate. Diffraction amplitudes in the vicinity of GaAs 111 and GaAs 333 reflections were used to reconstruct the lost phase information. It is demonstrated that the structure of the core-shell-shell nanowire can be identified by means of phase contrast. Interestingly, it is found that both scattered intensity in the (111) plane and the reconstructed scattering phase show an additional threefold symmetry superimposed with the shape function of the investigated hexagonal nanowires. In order to find the origin of this threefold symmetry, elasticity calculations were performed using the finite element method and subsequent kinematic diffraction simulations. These suggest that a non-hexagonal (In,Ga)As shell covering the hexagonal GaAs core might be responsible for the observation.

• Klíčová slova
• core–shell–shell nanowire, diffraction imaging, threefold rotational symmetry,
• Publikační typ
• časopisecké články MeSH

A facile synthesis based on the addition of ascorbic acid to a mixture of Na2 PdCl4, K2 PtCl6, and Pluronic P123 results in highly branched core-shell nanoparticles (NPs) with a micro-mesoporous dandelion-like morphology comprising Pd core and Pt shell. The slow reduction kinetics associated with the use of ascorbic acid as a weak reductant and suitable Pd/Pt atomic ratio (1:1) play a principal role in the formation mechanism of such branched Pd@Pt core-shell NPs, which differs from the traditional seed-mediated growth. The catalyst efficiently achieves the reduction of a variety of olefins in good to excellent yields. Importantly, higher catalytic efficiency of dandelion-like Pd@Pt core-shell NPs was observed for the olefin reduction than commercially available Pt black, Pd NPs, and physically admixed Pt black and Pd NPs. This superior catalytic behavior is not only due to larger surface area and synergistic effects but also to the unique micro-mesoporous structure with significant contribution of mesopores with sizes of several tens of nanometers.

• Klíčová slova
• core-shell nanoparticles, heterogeneous catalysis, olefins, palladium, platinum reduction,
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

In this work, a facile two-step strategy is adopted to construct hierarchical polyaniline/NiCo-layered double hydroxide (PANI/NiCo-LDH) core-shell composite nanofiber networks on carbon cloth (CC). Three-dimensional (3D) porous PANI nanofiber networks are firstly uniformly anchored on CC by in-situ oxidative polymerization, followed by growth of NiCo-LDH nanoflakes on the crosslinked PANI framework via electrochemical deposition. The morphology and electrochemical properties of PANI/NiCo-LDH composites are controlled by the deposition time of LDH. Benefiting from rapid electron transport and ion diffusion, the well-defined PANI/NiCo-LDH hierarchical composite with 200 s deposition of LDH delivers a large capacitance of 1845 F g-1 at 0.5 A g-1 and excellent cycling stability of 82% capacitance retention after 5000 cycles at a very high current density of 10.0 A g-1. Furthermore, an asymmetric supercapacitor (ASC) assembled with PANI/NiCo-LDH as a positive electrode and activated carbon (AC) as a negative electrode exhibits a high capacitance of 147.2 F g-1 in a potential range from 0 to 1.5 V and superior energy density of 46.0 Wh kg-1 at a power density of 351.6 W kg-1.

• Klíčová slova
• core-shell structure, electrochemical performance, layered double hydroxides, polyaniline nanofibers, supercapacitor,
• Publikační typ
• časopisecké články MeSH

An easy, low-cost, repeatable seed-mediated growth approach in solvothermal condition has been proposed to synthesize bimagnetic spinel ferrite core-shell heterostructures in the 10-20 nm particle size range. Cobalt ferrite and manganese ferrite nanoparticles (CoFe2O4 and MnFe2O4) have been coated with isostructural spinel ferrites like maghemite/magnetite, MnFe2O4, and CoFe2O4 with similar cell parameters to create different heterostructures. The conventional study of the structure, morphology, and composition has been combined with advanced techniques in order to achieve details on the interface at the nanoscale level. Clear evidence of the heterostructure formation have been obtained (i) indirectly by comparing the 57Fe Mössbauer spectra of the core-shell samples and an ad hoc mechanical mixture and (ii) directly by mapping the nanoparticles' chemical composition by electron energy loss spectroscopy (EELS) and energy-dispersive X-ray spectroscopy (EDX) in the scanning transmission electron microscopy mode (STEM). In addition, chemical-sensitive electron tomography in STEM-EDX mode has been applied in order to obtain detailed 3D images with a sub-nanometer spatial resolution.

• Klíčová slova
• EDX, EELS, Mössbauer, core−shell, ferrite, solvothermal, tomography,
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH
• Research Support, U.S. Gov't, Non-P.H.S. MeSH

Recently, we confirmed that the well-established theory of gradient elution can be employed for prediction of retention in gradient elution from the isocratic data, method development and optimization in fast gradient chromatography employing short packed fully porous and monolithic columns and gradient times in between 1 and 2min, or even less. In the present work, we extended this study to short core-shell reversed-phase columns. We investigated the effects of the specification of the stationary phase in the core-shell structure on the prediction of gradient retention data. Two simple retention models describing the effects of the mobile phase on the retention by two-parameter equations yield comparable accuracy and can be used for prediction of elution times. The log-log model provides improved prediction of gradient bandwidths, especially for less retained compounds. A more sophisticated three-parameter model did not offer significant improvement of prediction. We compared the efficiency, selectivity and peak capacity of fast gradient separations of alkylbenzenes, phenolic acids and flavones on seven core shell columns with different lengths and chemistry of bonded shell stationary phase. Within the limits dictated by a fixed short separation time, appropriate adjustment of the range of the composition of mobile phase during gradient elution is the most efficient means to optimize the gradient separation. The gradient range affects sample bandwidths equally or even more significantly than the column length. Both 5-cm and 3-cm core-shell columns may provide comparable peak capacity in a fixed short gradient time.

• Klíčová slova
• Core–shell columns, Flavones, Gradient peak capacity, Phenolic acids, Prediction of retention with fast gradients,
• MeSH
• chromatografie s reverzní fází přístrojové vybavení   metody   MeSH
• fenoly analýza   MeSH
• flavony analýza   MeSH
• poréznost MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH
• Názvy látek
• fenoly MeSH
• flavony MeSH

We explored a series of highly uniform magnetic nanoparticles (MNPs) with a core-shell nanoarchitecture prepared by an efficient solvothermal approach. In our study, we focused on the water dispersion of MNPs based on two different CoFe2O4 core sizes and the chemical nature of the shell (MnFe2O4 and spinel iron oxide). We performed an uncommon systematic investigation of the time and temperature evolution of the adiabatic heat release at different frequencies of the alternating magnetic field (AMF). Our systematic study elucidates the nontrivial variations in the heating efficiency of core-shell MNPs concerning their structural, magnetic, and morphological properties. In addition, we identified anomalies in the temperature and frequency dependencies of the specific power absorption (SPA). We conclude that after the initial heating phase, the heat release is governed by the competition of the Brown and Néel mechanism. In addition, we demonstrated that a rational parameter sufficiently mirroring the heating ability is the mean magnetic moment per MNP. Our study, thus, paves the road to fine control of the AMF-induced heating by MNPs with fine-tuned structural, chemical, and magnetic parameters. Importantly, we claim that the nontrivial variations of the SPA with the temperature must be considered, e.g., in the emerging concept of MF-assisted catalysis, where the temperature profile influences the undergoing chemical reactions.

• Klíčová slova
• blocking temperature, core-shell nanoparticles, frequency dependence, magnetic fluid hyperthermia, temperature-dependence, time dependence,
• Publikační typ
• časopisecké články MeSH

Core-shell nanocatalysts are a distinctive class of nanomaterials with varied potential applications in view of their unique structure, composition-dependent physicochemical properties, and promising synergism among the individual components. A one-pot microwave (MW)-assisted approach is described to prepare the reduced graphene oxide (rGO)-supported Pd-Pt core-shell nanoparticles, (Pd@Pt/rGO); spherical core-shell nanomaterials (∼95 nm) with Pd core (∼80 nm) and 15 nm Pt shell were nicely distributed on the rGO matrix in view of the choice of reductant and reaction conditions. The well-characterized composite nanomaterials, endowed with synergism among its components and rGO support, served as catalysts in aromatic dehalogenation reactions and for the reduction of olefins with high yield (>98%), excellent selectivity (>98%) and recyclability (up to 5 times); both Pt/rGO and Pd/rGO and even their physical mixtures showed considerably lower conversions (20 and 57%) in dehalogenation of 3-bromoaniline. Similarly, in the reduction of styrene to ethylbenzene, Pd@Pt core-shell nanoparticles (without rGO support) possess considerably lower conversion (60%) compared to Pd@Pt/rGO. The mechanism of dehalogenation reactions with Pd@Pt/rGO catalyst is discussed with the explicit premise that rGO matrix facilitates the adsorption of the reducing agent, thus enhancing its local concentration and expediting the hydrazine decomposition rate. The versatility of the catalyst has been validated via diverse substrate scope for both reduction and dehalogenation reactions.

• Klíčová slova
• Pd@Pt/rGO, core−shell nanocatalysts, dehalogenation, olefins, recyclable, reduction,
• Publikační typ
• časopisecké články MeSH

Zero-valent iron nanoparticles (nZVI) treated by reduced sulfur compounds (i.e., sulfidated nZVI, S-nZVI) have attracted increased attention as promising materials for environmental remediation. While the preparation of S-nZVI and its reactions with various groundwater contaminants such as trichloroethylene (TCE) were already a subject of several studies, nanoparticle synthesis procedures investigated so far were suited mainly for laboratory-scale preparation with only a limited possibility of easy and cost-effective large-scale production and FeS shell property control. This study presents a novel approach for synthesizing S-nZVI using commercially available nZVI particles that are treated with sodium sulfide in a concentrated slurry. This leads to S-nZVI particles that do not contain hazardous boron residues and can be easily prepared off-site. The resulting S-nZVI exhibits a core-shell structure where zero-valent iron is the dominant phase in the core, while the shell contains mostly amorphous iron sulfides. The average FeS shell thickness can be controlled by the applied sulfide concentration. Up to a 12-fold increase in the TCE removal and a 7-fold increase in the electron efficiency were observed upon amending nZVI with sulfide. Although the FeS shell thickness correlated with surface-area-normalized TCE removal rates, sulfidation negatively impacted the particle surface area, resulting in an optimal FeS shell thickness of approximately 7.3 nm. This corresponded to a particle S/Fe mass ratio of 0.0195. At all sulfide doses, the TCE degradation products were only fully dechlorinated hydrocarbons. Moreover, a nearly 100% chlorine balance was found at the end of the experiments, further confirming complete TCE degradation and the absence of chlorinated transformation products. The newly synthesized S-nZVI particles thus represent a promising remedial agent applicable at sites contaminated with TCE.

• Klíčová slova
• dechlorination, nanoparticles, selectivity, sulfidation, trichloroethylene, zero-valent iron,
• Publikační typ
• časopisecké články MeSH