OBJECTIVES: To evaluate the effect of smear layer deproteinization using hypochlorous acid (HOCl) with/without metal chlorides (SrCl2 and ZnCl2) on the microtensile bond strength (μTBS) of two simplified adhesives to dentin. METHODS: Human dentin surfaces with a standardized smear layer were pretreated using a 105 ppm HOCl solution with/without SrCl2 (0.05 M, 0.1 M, 0.2 M, 0.4 M) or ZnCl2 (0.05 M, 0.1 M, 0.2 M) for 5 s, 15 s, or 30 s. After the deproteinizing solution was washed out with water for 5 s, 15 s, or 30 s, pretreated surfaces were bonded with one-step self-etch adhesive Bond Force II or universal adhesive Clearfil Universal Bond Quick, and μTBS was measured after 24 h. Additionally, the deproteinizing effects of HOCl solutions with/without the metal chlorides were compared by measuring changes in the amide:phosphate ratio using attenuated total reflection Fourier transform infrared spectroscopy. Statistical analysis was performed using multifactor ANOVA, Tukey's post hoc tests and t-tests (p < 0.05). RESULTS: Pretreatment with pure HOCl for 15 s and 30 s significantly decreased the amide:phosphate ratio (p < 0.05), indicating effective deproteinization, but the μTBS of both adhesives increased significantly only if HOCl was washed out for 30 s (p < 0.05). Increasing the concentrations of metal chlorides enabled shortening of the wash-out time down to 5 s while maintaining the improved μTBS (p < 0.05). The deproteinizing effect of HOCl was not significantly altered by the addition of metal chlorides (p > 0.05). SIGNIFICANCE: The effectiveness of smear layer deproteinization using HOCl can be improved by the addition of metal chlorides, as their increasing concentration allowed to shorten the wash-out time from 30 s down to 5 s.
- MeSH
- amidy analýza farmakologie MeSH
- chloridy analýza farmakologie MeSH
- dentin chemie MeSH
- dentinová adheziva chemie MeSH
- fosfáty farmakologie MeSH
- kyselina chlorná analýza farmakologie MeSH
- lidé MeSH
- pevnost v tahu MeSH
- pryskyřičné cementy chemie MeSH
- smear layer * MeSH
- testování materiálů MeSH
- vazba zubní * MeSH
- zubní cementy farmakologie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
This study investigated the influence of application/wash-out times of sodium hypochlorite (NaOCl) and hypochlorous acid (HOCl) on dentin bond strength of one-step self-etch adhesives (1-SEAs). Human coronal dentin discs with a standardized smear layer were pretreated with 6% NaOCl or 100 ppm HOCl for 5 s, 15 s, or 30 s, and washed out with water for 5 s, 15 s or 30 s with or without the application of Clearfil DC Activator (CDA). No pretreatment was used as a control. The discs were bonded with a 1-SEA (Bond Force II or Clearfil Universal Bond Quick) and microtensile bond strength (μTBS) was measured after 24 h. Pretreatment with NaOCl for 15 s and 30 s significantly decreased μTBS (p<0.05), irrespective of wash-out time. The application of CDA recovered μTBS but did not outperform the control group. Conversely, pretreatment with HOCl for 15 s and 30 s followed by 30 s wash-out time significantly increased μTBS of 1-SEAs (p<0.05), regardless of CDA application.
OBJECTIVES: To evaluate the sealing performance of self-etch adhesives (SEA) after smear layer deproteinization with chemo-mechanical caries removal agents (CRA) to enamel and dentin cavity walls in comparison with 6% NaOCl smear layer deproteinizing. METHODS: Eighty extracted bovine incisors with tapered cylindrical cavities (2.5 mm upper diameter, 1.5 mm lower diameter, 2 mm depth) at the cemento-enamel junction were randomly divided into four pre-treatment groups; no treatment (control), Papacarie (papain enzyme-based CRA), Carisolv (NaOCl-based CRA), and 6% NaOCl. After pretreatment, G-Bond Plus (GBP, one-step SEA) or Clearfil SE Bond 2 (CSE, two-step SEA) was applied to the pre-treated cavity, and then filled with a flowable resin composite (Clearfil Majesty ES Flow). Gap formations at the enamel and dentin lateral walls, and on the dentin cavity floor were investigated using swept-source optical coherence tomography (SS-OCT) after 24-h water storage at 37 °C. Deproteinizing effects of the tested agents on smear layer-covered enamel and dentin were quantified by changes in the amide:phosphate ratio using ATR-FTIR analysis. RESULTS: Papacarie significantly reduced gap formation with both self-etch adhesives at all locations, compared to the control group (p < 0.05). In contrast, increased gap formation was observed with Carisolv and NaOCl. In most groups, CSE exhibited significantly lower gap formation than GBP (p < 0.05). ATR-FTIR revealed a significant decrease in the amide:phosphate ratio for all the deproteinizing agents (p < 0.05). CONCLUSIONS: Chemo-mechanical CRAs could effectively remove the organic phase of enamel and dentin smear layer. The papain enzyme-based gel Papacarie could improve the sealing performance of the self-etch adhesives to both enamel and dentin.
- MeSH
- adheziva MeSH
- dentin MeSH
- dentinová adheziva MeSH
- pryskyřičné cementy MeSH
- skot MeSH
- složené pryskyřice MeSH
- smear layer * MeSH
- testování materiálů MeSH
- vazba zubní * MeSH
- zubní cementy MeSH
- zubní sklovina MeSH
- zvířata MeSH
- Check Tag
- skot MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
