Colorectal cancer (CRC) is the third most common cancer worldwide, and metastatic CRC is a fatal disease. The CRC-affected tissues show several molecular markers that could be used as a fresh strategy to create newer methods of treating the condition. The liver and the peritoneum are where metastasis occurs most frequently. Once the tumor has metastasized to the liver, peritoneal carcinomatosis is frequently regarded as the disease's final stage. However, nearly 50% of CRC patients with peritoneal carcinomatosis do not have liver metastases. New diagnostic and therapeutic approaches must be developed due to the disease's poor response to present treatment choices in advanced stages and the necessity of an accurate diagnosis in the early stages. Many unique and amazing nanomaterials with promise for both diagnosis and treatment may be found in nanotechnology. Numerous nanomaterials and nanoformulations, including carbon nanotubes, dendrimers, liposomes, silica nanoparticles, gold nanoparticles, metal-organic frameworks, core-shell polymeric nano-formulations, and nano-emulsion systems, among others, can be used for targeted anticancer drug delivery and diagnostic purposes in CRC. Theranostic approaches combined with nanomedicine have been proposed as a revolutionary approach to improve CRC detection and treatment. This review highlights recent studies, potential, and challenges for the development of nanoplatforms for the detection and treatment of CRC.
- MeSH
- individualizovaná medicína MeSH
- kolorektální nádory * diagnóza farmakoterapie MeSH
- kovové nanočástice * MeSH
- lidé MeSH
- nanočástice * terapeutické užití MeSH
- nanomedicína metody MeSH
- nanotrubičky uhlíkové * MeSH
- peritoneální nádory * MeSH
- systémy cílené aplikace léků metody MeSH
- teranostická nanomedicína MeSH
- zlato MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- přehledy MeSH
The association of mesothelioma, a lethal lung disease, with asbestos has led to an absolute ban on asbestos in at least 55 countries worldwide. The purpose of this paper is to review residual exposure to asbestos as well as other emerging causes of mesothelioma outside asbestos. The review provides detailed description of asbestos minerals, their geographical locations, mesothelioma in these areas, as well as contemporary possible sources of asbestos exposure. Second, we examine other emerging causes of mesothelioma including: ionizing radiation as the second most important risk factor after asbestos, particularly relevant to patients undergoing radiotherapy, third, carbon nanotubes which are under investigation and fourth, Simian virus 40. In the case of asbestos per se, the greatest risk is from occupational exposure during mining and subsequent processing. Of the non-occupational exposures, environmental exposure is most serious, followed by exposure from indoor asbestos minerals and secondary familial exposure. Overall, asbestos is still a major risk factor, but alternative causes should not be neglected, especially in young people, in women and those with a history of radiotherapy or living in high-risk locations.
- MeSH
- azbest * škodlivé účinky MeSH
- lidé MeSH
- maligní mezoteliom * chemicky indukované komplikace MeSH
- mezoteliom * chemicky indukované komplikace MeSH
- minerály MeSH
- mladiství MeSH
- nádory pleury * chemicky indukované komplikace MeSH
- nádory plic * chemicky indukované MeSH
- nanotrubičky uhlíkové * MeSH
- vystavení vlivu životního prostředí škodlivé účinky MeSH
- Check Tag
- lidé MeSH
- mladiství MeSH
- ženské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
- přehledy MeSH
INTRODUCTION: Inhalation of nanomaterials may induce inflammation in the lung which if left unresolved can manifest in pulmonary fibrosis. In these processes, alveolar macrophages have an essential role and timely modulation of the macrophage phenotype is imperative in the onset and resolution of inflammatory responses. This study aimed to investigate, the immunomodulating properties of two industrially relevant high aspect ratio nanomaterials, namely nanocellulose and multiwalled carbon nanotubes (MWCNT), in an alveolar macrophage model. METHODS: MH-S alveolar macrophages were exposed at air-liquid interface to cellulose nanocrystals (CNC), cellulose nanofibers (CNF) and two MWCNT (NM-400 and NM-401). Following exposure, changes in macrophage polarization markers and secretion of inflammatory cytokines were analyzed. Furthermore, the potential contribution of epigenetic regulation in nanomaterial-induced macrophage polarization was investigated by assessing changes in epigenetic regulatory enzymes, miRNAs, and rRNA modifications. RESULTS: Our data illustrate that the investigated nanomaterials trigger phenotypic changes in alveolar macrophages, where CNF exposure leads to enhanced M1 phenotype and MWCNT promotes M2 phenotype. Furthermore, MWCNT exposure induced more prominent epigenetic regulatory events with changes in the expression of histone modification and DNA methylation enzymes as well as in miRNA transcript levels. MWCNT-enhanced changes in the macrophage phenotype were correlated with prominent downregulation of the histone methyltransferases Kmt2a and Smyd5 and histone deacetylases Hdac4, Hdac9 and Sirt1 indicating that both histone methylation and acetylation events may be critical in the Th2 responses to MWCNT. Furthermore, MWCNT as well as CNF exposure led to altered miRNA levels, where miR-155-5p, miR-16-1-3p, miR-25-3p, and miR-27a-5p were significantly regulated by both materials. PANTHER pathway analysis of the identified miRNA targets showed that both materials affected growth factor (PDGF, EGF and FGF), Ras/MAPKs, CCKR, GnRH-R, integrin, and endothelin signaling pathways. These pathways are important in inflammation or in the activation, polarization, migration, and regulation of phagocytic capacity of macrophages. In addition, pathways involved in interleukin, WNT and TGFB signaling were highly enriched following MWCNT exposure. CONCLUSION: Together, these data support the importance of macrophage phenotypic changes in the onset and resolution of inflammation and identify epigenetic patterns in macrophages which may be critical in nanomaterial-induced inflammation and fibrosis.
Precise detection of important pharmaceuticals with narrow therapeutic index (NTI) is very critical as there is a small window between their effective dose and the doses at which the adverse reactions are very likely to appear. Regarding the fact that various pharmacokinetics will be plausible while considering pharmacogenetic factors and also differences between generic and brand name drugs, accurate detection of NTI will be more important. Current routine analytical techniques suffer from many drawbacks while using novel biosensors can bring up many advantages including fast detection, accuracy, low cost with simple and repeatable measurements. Recently the well-known carbon Nano-allotropes including carbon nanotubes and graphenes have been widely used for development of different Nano-biosensors for a diverse list of analytes because of their great physiochemical features such as high tensile strength, ultra-light weight, unique electronic construction, high thermo-chemical stability, and an appropriate capacity for electron transfer. Because of these exceptional properties, scientists have developed an immense interest in these nanomaterials. In this case, there are important reports to show the effective Nano-carbon based biosensors in the detection of NTI drugs and the present review will critically summarize the available data in this field.
The supply of safe drinking and clean water is becoming increasingly challenging proposition throughout the world. The deployment of environmentally sustainable nanomaterials with unique advantages namely high efficiency and selectivity, earth-abundance, recyclability, low-cost of production processes, and stability, has been a priority although several important challenges and constraints still remained unresolved. Carbon nanomaterials namely activated carbon, multi-walled- and single-walled carbon nanotubes, have been developed and applied as adsorbents for wastewater treatment and purification; graphene and graphene oxide-based nanomaterials as well as carbon and graphene quantum dots-derived nanomaterials have shown significant promise for water and wastewater treatment and purification, especially, for industrial- and pharmaceutical-laden wastes. This review encompasses advanced carbonaceous nanomaterials and methodologies that are deployed for the elimination of contaminants and ionic metals in aqueous media, and as novel nanosorbents for wastewater, drinking and ground water treatment. Additionally, recent trends and challenges pertaining to the sustainable carbon and graphene quantum dots-derived nanomaterials and their appliances for treating and purifying wastewater are highlighted.
- MeSH
- čištění vody * MeSH
- nanostruktury * MeSH
- nanotrubičky uhlíkové * MeSH
- odpadní voda MeSH
- voda MeSH
- Publikační typ
- časopisecké články MeSH
- přehledy MeSH
A novel approach for the assembly of Sn-based metal organic framework (Sn-MOF) via solvothermal method and its composite (Sn-MOF@CNT) with electroactive material, carbon nanotubes (CNT) by sonochemical means, is described that is useful for hydrogen peroxide sensing; large surface area and pore volume of Sn-MOF were exploited where in the crystallinity of the Sn-MOF was preserved upon inclusion of CNT over its surface. The surface morphology and structural analysis of Sn-MOF and its composite form, Sn-MOF@CNT, were determined analytically through Fourier-transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), Scanning electron microscopy (SEM), Brunauer-Emmett-Teller and Energy-dispersive X-ray spectroscopy (EDX). The developed Sn-MOF@CNT sensor was expansively used to determine and optimize the effect of scan rate, concentration and detection limits including the EDX and SEM analysis of used Sn-MOF@CNT nanocomposite's post hydrogen peroxide sensing. The electrochemical sensing with Sn-MOF@CNT revealed a lower limit of detection ~4.7 × 10-3 μM with wide linear range between 0.2 μM and 2.5 mM. This study has explored a new strategy for the deposition of CNT over Sn-MOF via a simple sonochemical methodology for successful electrochemical detection of H2O2, an approach that can be imitated for other applications.
In vitro three-dimensional (3D) lung cell models have been thoroughly investigated in recent years and provide a reliable tool to assess the hazard associated with nanomaterials (NMs) released into the air. In this study, a 3D lung co-culture model was optimized to assess the hazard potential of multiwalled carbon nanotubes (MWCNTs), which is known to provoke inflammation and fibrosis, critical adverse outcomes linked to acute and prolonged NM exposure. The lung co-cultures were exposed to MWCNTs at the air-liquid interface (ALI) using the VITROCELL® Cloud system while considering realistic occupational exposure doses. The co-culture model was composed of three human cell lines: alveolar epithelial cells (A549), fibroblasts (MRC-5), and macrophages (differentiated THP-1). The model was exposed to two types of MWCNTs (Mitsui-7 and Nanocyl) at different concentrations (2-10 μg/cm2) to assess the proinflammatory as well as the profibrotic responses after acute (24 h, one exposure) and prolonged (96 h, repeated exposures) exposure cycles. The results showed that acute or prolonged exposure to different concentrations of the tested MWCNTs did not induce cytotoxicity or apparent profibrotic response; however, suggested the onset of proinflammatory response.
- MeSH
- aerosoly MeSH
- alveolární makrofágy metabolismus patologie MeSH
- biologické modely * MeSH
- buňky A549 MeSH
- fibroblasty metabolismus patologie MeSH
- lidé MeSH
- nanotrubičky uhlíkové škodlivé účinky MeSH
- pneumocyty metabolismus patologie MeSH
- THP-1 buňky MeSH
- zánět chemicky indukované metabolismus MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
We report on the synthesis of unique nanocomposites based on graphene oxide (GO) and oxidized single-wall carbon nanotubes (O-SWCNTs) combined with UiO-66-NH2 and UiO-66-COOH metal-organic frameworks (MOFs) decorated onto Co0·5Ni0·5FeCrO4 spinel magnetic nanoparticles (SMNPs). Novel SMNPs of Co0·5Ni0·5FeCrO4, synthesized for the first time by the sol-gel method, exhibited exceptional thermal stability up to 985 °C. To modify the physicochemical properties of the SMNPs and MOFs, hydrophilic Zr-based MOFs were directly decorated onto the SMNP (MOF-d-SMNP) which led to improved dispersion properties and enhanced the catalytic activity of the SMNP by providing additional functional groups and active catalytic sites, along with surface area expansion. The synthesis and decoration were achieved by a hydrothermal process forming covalent bonding of MOFs onto the SMNPs, using O-SWCNTs and GO monolayers as platforms. Such an approach proved to be more effective than direct mixing of nanoparticles with the platforms, as it reduced the aggregation of nanoparticles and improved the dispersion forces of the MOF-d-SMNP. The MOF-d-SMNP/GO and MOF-d-SMNP/O-SWCNT nanocomposite properties were characterized by XRD, SEM-EDS, HRTEM, FTIR, TGA, gravimetric gas sorption and BET techniques. Performed experiments revealed exceptional adsorption capacity and catalytic activity (the reduction of the toxic pollutant 4-nitrophenol to 4-aminophenol). We demonstrated that novel nanocomposite materials MOF-d-SMNP/GO and MOF-d-SMNP/O-SWCNT showed potential for water treatment and gas sorption applications. Exhibited properties make these materials promising candidates for use in applications requiring, for example, catalytic activity at elevated temperatures.
BACKGROUND: The widespread application of engineered nanomaterials (ENMs) and the increasing likelihood of general and occupational exposure raised concerns on their possible human health impact. ENMs, in fact, may induce alterations in different organ systems, and particularly in the respiratory tract. This makes it important to identify possible biomarkers of early lung effect in exposed workers. In this regard, the possibility to use the fractional exhaled levels of nitric oxide (FENO) in biological monitoring has attracted considerable interest. OBJECTIVE: To comprehensively assess the role of FENO as a possible biomarker of lung effect in ENM exposed workers. METHODS: A systematic search was performed on Pubmed, Scopus, and ISI Web of Knowledge databases according to the PRISMA guidelines. RESULTS: Seven studies investigated FENO in workers exposed to different kinds of metal- (i.e. silver and gold), metal oxide- (titanium and silica dioxide), and carbon-based ENMs (carbon nanotubes). In general, no significant alterations were detected between exposed workers and controls. CONCLUSION: Definite conclusion on the function of FENO in occupational biological monitoring cannot be extrapolated due to the limited number of available studies and the small size of investigated populations. Additionally, the lack of environmental monitoring data and the fragmented knowledge on ENM modes of action prevent to establish dose-response relationships. Future research appears necessary to deeply define the possibility to employ FENO as an early biomarker of lung effects taking in consideration possible occupational exposure issues, i.e. differently characterized ENMs and work tasks, as well as individual influencing factors, i.e. smoking and atopy.
- MeSH
- biologické markery MeSH
- dechové testy MeSH
- lidé MeSH
- nanostruktury * toxicita MeSH
- nanotrubičky uhlíkové MeSH
- oxid dusnatý MeSH
- pracoviště MeSH
- vydechnutí MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- přehledy MeSH
Graphene oxide (GO) and multi-walled carbon nanotubes (MWCNTs) were added to furcellaran films (FUR). Silver nanoparticles (AgNPs) were prepared by reducing AgNO3 using a FUR matrix as the stabilising agent. The structure and surface morphology of nanocomposite films were obtained using FTIR, SEM and XRD. The molecular weights of furcellaran chains were estimated using HPSEC-MALLS-RI. Characterisation of the films was undertaken to analyse their physical, mechanical and structural properties. SEM analysis revealed that GO, MWCNTs and AgNPs were evenly distributed throughout the FUR surface. FUR + AgNP films showed antimicrobial activity against bacteria and fungi. P. aeruginosa, E. faecalis and S. aureus were the most affected with effective growth inhibition using the disc diffusion method. In the study, the effect of nanofillers on the structural, thermal, mechanical and antimicrobial properties of furcellaran films as potential materials for food packaging is presented.
- MeSH
- algináty chemie MeSH
- antibakteriální látky chemie farmakologie MeSH
- Bacteria účinky léků MeSH
- biopolymery chemie MeSH
- grafit chemie MeSH
- kovové nanočástice chemie MeSH
- nanokompozity chemie MeSH
- nanotrubičky uhlíkové chemie MeSH
- rostlinné gumy chemie MeSH
- stříbro chemie MeSH
- Publikační typ
- časopisecké články MeSH