A set of new mixed-mode ion-exchange stationary phases is presented. The backbone of organic selectors is formed by a linear hydrocarbon chain, which is divided into two parts of various lengths by a heteroatom (oxygen or nitrogen). In all studied cases, there is a sulfonic acid moiety as the terminal group. Therefore, selectors bearing oxygen gave rise to strong cation ion-exchange stationary phases, while selectors with an embedded nitrogen atom (inducing a weak anion exchange capacity) were used to create zwitterion ion-exchange stationary phases. The new mixed-mode stationary phases were chromatographically evaluated in high performance liquid chromatography (HPLC) and supercritical fluid chromatography (SFC) using isocratic elution conditions to disclose their chromatographic potential. In HPLC mode, aqueous-rich reversed phase chromatography, acetonitrile-rich hydrophilic interaction liquid chromatography and methanolic ion-exchange chromatography mobile phases were employed. In these chromatographic modes, retention factors and selectivity values for a test set of basic and zwitterionic analytes were determined. The results were compared and principal component analysis for each chromatographic mode was performed. For all chromatographic modes, the component 1 in the principal component analysis reflected the elution order. The application of different mobile phases on a particular column resulted not only in variation in retention, but also in modified selectivity, and different elution order of the analytes. The orthogonality of the elution order depending on the employed mobile phase conditions was especially reflected for structurally closely related analytes, such as melatonin and N-acetyl-serotonin, tryptamine and serotonin or noradrenalin and octopamine. However, ion-exchange interactions remain the main driving force for retention. From all investigated stationary phases, the SCX 2 (C5-linker and C4-spacer) seems to be the best choice for the separation of basic analytes using different mobile phase conditions.
- MeSH
- acetonitrily chemie MeSH
- anionty chemie MeSH
- biogenní aminy izolace a purifikace MeSH
- chemie farmaceutická metody MeSH
- chromatografie metody MeSH
- hydrofobní a hydrofilní interakce MeSH
- iontová výměna MeSH
- kationty chemie MeSH
- léčivé přípravky chemie izolace a purifikace MeSH
- methanol chemie MeSH
- voda chemie MeSH
- Publikační typ
- časopisecké články MeSH
The coupling of columns in sub/supercritical fluid chromatography presents a great opportunity for influencing the separation efficiency and extending the selectivity of the separation system. Combinations of different types of chiral stationary phases could positively affect the enantioresolution if single ones are complementary to each other. In this work, two superficially porous particle (2.7 μm) macrocyclic glycopeptide-based columns, namely TeicoShell and NicoShell, were serially coupled and tested in sub/supercritical fluid chromatography for the first time. The influence of the column arrangement on the enantioseparation of structurally diverse biologically active compounds was examined. The obtained results showed how the column order crucially affected the enantioresolution of compounds tested, but the retention was negligibly affected in most cases. We also demonstrated that single TeicoShell and NicoShell columns are very promising towards the development of highly efficient and fast/ultrafast sub/supercritical fluid chromatography methods for structurally different chiral compounds. The optimized methods for sub-minute enantioselective separation of certain biologically important compounds were proposed.
Planar polyamide 6 nanofibrous membrane was for the first time used in direct coupling of supported liquid membrane (SLM) extraction to CE analysis. Disposable microextraction device with the nanofibrous membrane was preassembled and stored for immediate use. The membrane in the device was impregnated with 1 µL of 1-ethyl-2-nitrobenzene and the device was subsequently filled with 10 µL of acceptor solution (10 mM HCl) and 15 µL of donor solution (sample). The device was in-line coupled to CE system for selective extraction and direct injection, separation and quantification of model basic drugs (nortriptyline, haloperidol, loperamide and papaverine) from standard saline solutions (150 mM NaCl) and from undiluted human body fluids (urine and blood plasma). Compared to standard polypropylene supporting material, the nanofibrous membrane demonstrated superior characteristics in terms of lower consumption of organic solvents, constant volumes of operational solutions, full transparency and possibility to preassemble the devices. Extraction parameters were better or comparable for the nanofibrous vs. the polypropylene membrane and the hyphenated SLM-CE method with the nanofibrous membrane was characterized by good repeatability (RSD ≤ 11.3%), linearity (r2 ≥ 0.9953; 0.5-20 mg/L), sensitivity (LOD ≤ 0.4 mg/L) and transfer (27-126%) of the basic drugs.
- MeSH
- chemické modely MeSH
- design vybavení MeSH
- elektroforéza kapilární přístrojové vybavení metody MeSH
- léčivé přípravky krev izolace a purifikace moč MeSH
- lidé MeSH
- lineární modely MeSH
- membrány umělé * MeSH
- nanovlákna chemie MeSH
- reprodukovatelnost výsledků MeSH
- senzitivita a specificita MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
Oligosaccharide-based chiral stationary phases are frequently used for enantioselective separations by different chromatographic techniques, namely gas chromatography, high performance liquid chromatography, supercritical fluid chromatography or capillary electrochromatography. Their multimodal application potential (they are compatible with both polar and/or non-polar mobile phases) makes them suitable chiral selector candidates for separation of a wide variety of structurally diverse compounds. In this paper, separation systems utilizing cyclodextrin- or cyclofructan-based chiral stationary phases in analyses of pharmacologically active compounds are summarized. The review covers the period from 2000 to 2015. This review article can be helpful to analysts searching for an appropriate method for the separation/determination of pharmaceuticals of their interest.
The new microextraction technique named parallel artificial liquid membrane extraction (PALME) was introduced as an alternative approach to liquid-liquid extraction of charged analytes from aqueous samples. The concept is based on extraction of analytes across a supported liquid membrane sustained in the pores of a thin polymeric membrane, a well-known extraction principle also used in hollow fiber liquid-phase microextraction (HF-LPME). However, the new PALME technique offers a more user-friendly setup in which the supported liquid membrane is incorporated in a 96 well plate system. Thus, high-throughput is achievable, in addition to the green chemistry offered by using PALME. The consumption of organic solvent is minimized to 3-5μL per sample. With a sample volume of 250μL and acceptor solution volume of 50μL, a maximal enrichment factor of five is achievable. Based on these parameters, a new method for extraction of polar basic drugs was developed in the present work. The basic drugs hydralazine, ephedrine, metaraminol, salbutamol, and cimetidine were used as model analytes, and were extracted from alkalized human plasma into an aqueous solution via the supported liquid membrane. The extraction was promoted by a carrier dissolved in the membrane, creating a temporary ion-pair complex between the hydrophilic drug and the carrier. As the model analytes were extracted directly into an aqueous solution, there was no need for evaporation of the extract before injection into LC-MS. Hence, the sample preparation is performed in one step. With optimized conditions, the extraction recoveries were in the range 50-89% from human plasma after 45min extraction. The data from the method evaluation were satisfactory and in line with current guidelines, and revealed an extraction method with substantial potential for high throughput bioanalysis of polar basic drugs.
- MeSH
- chromatografie kapalinová metody MeSH
- extrakce kapalina-kapalina metody MeSH
- hmotnostní spektrometrie metody MeSH
- léčivé přípravky krev chemie izolace a purifikace MeSH
- lidé MeSH
- limita detekce MeSH
- lineární modely MeSH
- membrány umělé * MeSH
- reprodukovatelnost výsledků MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
In this work, the synthesis, characterization, and chiral capillary electrophoretic study of heptakis-(2,3-di-O-methyl-6-O-carboxymethyl)-β-CD (HDMCM), a single-isomer carboxymethylated CD, are presented. The pH-dependent and selector concentration-dependent enantiorecognition properties of HDMCM were investigated and discussed herein. The enantioseparation was assessed applying a structurally diverse set of noncharged, basic, and zwitterionic racemates. The increase in the selector concentration and gross negative charge of HDMCM improved the enantioseparation that could be observed in the majority of the cases. HDMCM was also successfully applied as BGE additive in NACE using a methanol-based system in order to prove the separation selectivity features and to highlight the broad applicability of HDMCM. Over 25 racemates showed partial or baseline separation with HDMCM under the conditions investigated, among which optimal enantiomer migration order was found for the four stereoisomers of tadalafil, tapentadol, and dapoxetine, offering the possibility of a chiral CE method development for chiral purity profiling of these drugs.
This study investigated the i) kinetics, and ii) proportion of photolysis of 30 relatively stable active pharmaceutical ingredients (APIs) during artificial UV irradiation for 28 d in ammonium acetate buffer, filtered and unfiltered river water. Buffer was included to control removal kinetics under stable pH conditions and without particulate matter. Dark controls were used to determine removal due to other processes than photolysis and calculate the proportion of photolysis of the total removal. The removal of each API in each matrix was determined using online solid phase extraction/liquid chromatography tandem mass spectrometry (online SPE/LC-MS/MS). Most APIs transformed during the 28 d of UV irradiation and the dark controls showed that photolysis was the major removal process for the majority of the APIs studied. The half-lives ranged from 6 h (amitriptyline) in unfiltered river water to 884 h (37 d, carbamazepine) in buffer. In unfiltered river water, the proportion of APIs with short half-lives (<48 h) was much higher (29%) than in the other matrices (4%), probably due to additional organic carbon, which could have promoted indirect photolysis. Furthermore, two APIs, memantine and fluconazole, were stable in all three matrices, while alprazolam was stable in buffer and unfiltered river water and four additional APIs were stable in buffer. Considering the relatively long-term UV-exposure, this study enabled the investigation of environmentally relevant half-lives in natural waters. Many APIs showed high persistence, which is environmentally concerning and emphasizes the importance of further studies on their environmental fate and effects.
- MeSH
- časové faktory MeSH
- chemické látky znečišťující vodu izolace a purifikace účinky záření MeSH
- extrakce na pevné fázi metody MeSH
- fotolýza účinky záření MeSH
- kinetika MeSH
- léčivé přípravky izolace a purifikace účinky záření MeSH
- poločas MeSH
- regenerace a remediace životního prostředí metody MeSH
- řeky chemie MeSH
- stabilita léku MeSH
- tandemová hmotnostní spektrometrie metody MeSH
- ultrafialové záření * MeSH
- voda MeSH
- Publikační typ
- časopisecké články MeSH
To follow the twelve "green analytical chemistry" (GAC) principles, it is necessary to continuously develop analytical extraction and determination methodologies to assess the presence of micropollutants, such as pharmaceuticals, in environmental samples. A reduction in the analysis time and solvent quantity, which is one of the GAC principles, has been achieved through a simplified solid-phase extraction (SPE) procedure combined with high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) for the determination of twenty-three pharmaceuticals in liquid environmental samples using N-vinylpyrrolidone-divinylbenzene copolymer (OASIS HLB) cartridges. The optimal SPE conditions were studied. In these optimized conditions, 82.6% of the data have a median recovery above 70% for all compounds in each sample. The relative standard deviations (RSDs) were below 14.4% and 22.0% for intra- and inter-day repeatability, respectively. Method detection limits (MDLs) and method quantification limits (MQLs) ranged from 0.011 to 188ngL(-1) and from 0.033 to 628ngL(-1), respectively. The applicability of the method was evaluated in real samples from natural and conventional wastewater treatment plants (WWTPs), and results were obtained in concentration ranges from 0.013 to 91.5μgL(-1) and from 0.004 to 49.1μgL(-1), respectively.
- MeSH
- chemické látky znečišťující vodu analýza izolace a purifikace MeSH
- chromatografie kapalinová MeSH
- extrakce na pevné fázi * MeSH
- léčivé přípravky analýza izolace a purifikace MeSH
- limita detekce MeSH
- monitorování životního prostředí metody MeSH
- odpadní voda chemie MeSH
- sladká voda chemie MeSH
- tandemová hmotnostní spektrometrie * MeSH
- Publikační typ
- časopisecké články MeSH
This contribution is the second part of the project on strategies used in the selection of electrolyte systems for anionic ITP with ESI-mass spectrometric detection. It presents ITP as a powerful tool for selective stacking of anionic analytes, performed in a nonconventional way in moving-boundary systems where two co-anions are present in both the leading and terminating zones. The theoretical background is given to substantiate the conditions for the existence and migration of ITP boundaries in moving-boundary systems and stacking of analytes at these boundaries. The practical aspects of the theory are shown in form of stacking-window diagrams that bring immediate information about which analytes are stacked in a given system. The presented theory and strategy are illustrated and verified on the example of analysis of a model mixture of salicylic acid, ibuprofen and diclofenac, and comparison of regular and free-acid ITP with moving-boundary ITP systems formed by formic and propionic acids and ammonium as counterion.
This study introduces a silica-based monolith in a capillary format (0.1 mm × 100 mm) as a support for immobilization of liposomes and its characterization in immobilized liposome chromatography. Silica-based monolithic capillary columns prepared by acidic hydrolysis of tetramethoxysilane in the presence of polyethylene glycol and urea were modified by (3-aminopropyl)trimethoxysilane, whereby amino groups were introduced to the monolithic surface. These groups undergo reaction with glutaraldehyde to form an iminoaldehyde, allowing covalent binding of pre-formed liposomes containing primary amino groups. Two types of phospholipid vesicles were used for column modification; these were 2-oleoyl-1-palmitoyl-sn-glycero-3-phosphatidyl choline with and without 1,2-diacyl-sn-glycero-3-phospho-L-serine. The prepared columns were evaluated under isocratic separation conditions employing 20mM phosphate buffer at pH 7.4 as a mobile phase and a set of unrelated drugs as model analytes. The liposome layer on the synthesized columns significantly changed the column selectivity compared to the aminopropylsilylated monolithic stationary phase. Monolithic columns modified by liposomes were stable under the separation conditions, which proved the applicability of the suggested preparation procedure for the synthesis of capillary columns dedicated to study analyte-liposome interactions. The column efficiency originating from the silica monolith was preserved and reached, e.g., more than 120,000 theoretical plates/m for caffeine as a solute.