amorphous
Dotaz
Zobrazit nápovědu
Non-isothermal differential scanning calorimetry was used to study the influences of particle size and mechanically induced defects on the recrystallization kinetics of amorphous Enzalutamide. Enzalutamide prepared by hot melt extrusion and spray-drying was used as a model material. The recrystallization rate was primarily accelerated by the presence of the processing-damaged surface of the powder particles. The actual surface/volume ratio associated with decreasing particle size fulfilled only a secondary role. Interestingly, higher quench rate during the extrusion led to a formation of thermally less stable material (with the worse stability being manifested via lower activation energy of crystal growth in the amorphous matrix). This can be the consequence of the formation of looser structure more prone to rearrangements. The recrystallization kinetics of the prepared Enzalutamide amorphous materials was described by the two-parameter autocatalytic kinetic model. The modified single-curve multivariate kinetic analysis (optimized for the data obtained at heating rate 0.5 °C•min-1) was used to calculate the extrapolated kinetic predictions of long-term isothermal crystal growth. The predictions were made for the temperatures from the range of drug shelf-life and processing for each particle size fraction. By the combination of the mass-weighted predictions for the individual powder fractions it was possible to obtain a very reasonable (temperature-extrapolated) prediction of the crystallization rate for the as-prepared unsieved powdered amorphous Enzalutamide.
OBJECTIVE: We aimed to establish detailed morphology of the structureless amorphous hydroxyapatite (HAP) phase to improve our understanding of the formation mechanism of these concretions. Noninfectious phosphate renal calculi composed mainly of HAP consist of inorganic material in the form of spherules, in a seemingly structureless and amorphous phase and organic matter. METHODS: Several cross-sections of a fraction of phosphate renal stone composed solely of the amorphous HAP phase were examined with atomic force microscope. Both 2- and 3-dimensional images of their structure and nanoscale elastic modulus maps were obtained. RESULTS: The amorphous hap phase consists of 2 distinctly different morphologic forms of hydroxyapatite: separate and/or intergrown columnar crystals, and spherical agglomerates with diameters in the range 150-300 nm consisting of spherulites approximately 10 nm in diameter. The columnar crystals are irregularly disseminated in the stone interior, which is porous because of cavities with depths in excess of 100 nm. Organic matter is almost evenly distributed throughout the stone interior. CONCLUSION: Based on the observed calculus structure, the following mechanism of formation of the noninfectious phosphate calculi is suggested: Spherulites formed via the perikinetic aggregation of Posner's clusters present in urine supersaturated with respect to hydroxyapatite aggregate into spherical agglomerates that, after reaching a certain size, are retained in cavities with poor urodynamics, gradually settle, and become incorporated into developing concretion. The columnar crystals are probably nucleated on the detritus of organic origin embedded in the hydroxyapatite structureless phase.
- MeSH
- fosforečnany vápenaté chemie MeSH
- hydroxyapatit MeSH
- imunohistochemie MeSH
- ledvinové kameny chemie MeSH
- lidé MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
A new item of amorphous hydrates was recently introduced into a group of active pharmaceutical ingrediences. Their concept has a realistic content, but it is strongly influenced by the patent policy of pharmaceutical companies claiming possible new phases. An amorphous hydrate can be defined as a metastable, water-saturated amorphous phase, which retains a constant amount of water for a long time. Due to their advantageous properties, amorphous hydrates can be used for drug formulation in pharmacy.
Polyhydroxyalkanoates (PHA) are storage polymers accumulated by numerous prokaryotes in form of intracellular granules. Native PHA granules are formed by amorphous polymer which reveals considerably higher elasticity and flexibility as compared to crystalline pure PHA polymers. The fact that bacteria store PHA in amorphous state has great biological consequences. It is not clear which mechanisms protect amorphous polymer in native granules from transition into thermodynamically favorable crystalline state. Here, we demonstrate that exposition of bacterial cells to particular stressors induces granules aggregation, which is the first but not sufficient condition for PHA crystallization. Crystallization of the polymer occurs only when the stressed bacterial cells are subsequently dried. The fact that both granules aggregation and cell drying must occur to induce crystallization of PHA indicates that both previously suggested hypotheses about mechanisms of stabilization of amorphous state of native PHA are valid and, in fact, both effects participate synergistically. It seems that the amorphous state of the polymer is stabilized kinetically by the low rate of crystallization in limited volume in small PHA granules and, moreover, water present in PHA granules seems to function as plasticizer protecting the polymer from crystallization, as confirmed experimentally for the first time by the present work.
Spray drying is commonly used for producing amorphous solid dispersions to improve drug solubility. The development of such formulations typically relies on comprehensive excipient and composition screening, which requires the preparation of many spray-dried powder samples. This is both labour-intensive and time-consuming when carried out manually. In the present work, the formulation screening task was automated by coupling a laboratory spray dryer operated in a semi-continuous mode with custom-made add-ons, allowing for rapid, computer-controlled production of formulation samples with systematically varying composition. The practical use of the spray drying robot in formulation development was demonstrated on a case study of poorly water-soluble model drugs simvastatin and ezetimibe. Six different polymers and several drug:polymer ratios were screened for the enhancement of dissolution properties. From a pool of 28 spray-dried samples, ternary compositions containing Eudragit L100-55 were identified as the most suitable ones for further processing and characterisation. The ability to populate the formulation design space rapidly and automatically made it possible to construct maps of physico-chemical properties such as glass transition temperature or dissolution rate. The spray drying robot thus enables the acceleration of early formulation development and a deeper understanding of composition-property relationships for multi-component spray dried powders.
- MeSH
- polymery chemie MeSH
- příprava léků MeSH
- robotika * MeSH
- rozpustnost MeSH
- sprejové sušení * MeSH
- Publikační typ
- časopisecké články MeSH
Binary and ternary amorphous transition metal (TM) nitrides and oxides are of great interest because of their suitability for diverse applications ranging from high-temperature machining to the production of optical filters or electrochromic devices. However, understanding of bonding in, and electronic structure of, these materials represents a challenge mainly due to the d electrons in their valence band. In the present work, we report ab initio calculations of the structure and electronic structure of ZrSiN materials. We focus on the methodology needed for the interpretation and automatic analysis of the bonding structure, on the effect of the length of the calculation on the convergence of individual quantities of interest and on the electronic structure of materials. We show that the traditional form of the Wannier function center-based algorithm fails due to the presence of d electrons in the valence band. We propose a modified algorithm, which allows one to analyze bonding structure in TM-based systems. We observe an appearance of valence p states of TM atoms in the electronic spectra of such systems (not only ZrSiN but also NbO(x) and WAuO), and examine the importance of the p states for the character of the bonding as well as for facilitating the bonding analysis. The results show both the physical phenomena and the computational methodology valid for a wide range of TM-based ceramics.
Despite recent advances in solid-state NMR spectroscopy, the structural characterization of amorphous active pharmaceutical ingredients (APIs) in solid dosage forms continues to be a monumental challenge. To circumvent complications following from low concentrations of APIs in tablet formulations, we propose a new time-saving procedure based on chemometric approach: factor analysis of (19)F MAS NMR spectra. Capability of the proposed method is demonstrated on atorvastatin--a typical representative of fluorinated pharmaceutical substances exhibiting extensive polymorphism. Applying the factor analysis on the recorded (19)F MAS NMR spectra, unique parameters for every sample were derived. In this way every solid form of atorvastatin was characterized and clearly distinguishable even among various amorphous and disordered forms. The proposed method was also found to be suitable for both qualitative and quantitative analysis of mixtures of various forms of atorvastatin. Reliability of the proposed method was extensively examined by comparing the obtained results with other experimental techniques such as (13)C CP/MAS NMR, FTIR and XRPD. As highly linear correlations between the sets of parameters obtained from different experimental data were found, the perspectives of the applied comparative factor analysis to obtain detail structural view on variability of amorphous forms of atorvastatin are also discussed. Although the reported method was tested on atorvastatin, authors expect wider application for any fluorinated compound to give the routine, fast and reliable characterization of amorphous forms of APIs in drug products even at low concentrations (1-5%). Bear in mind that 20-25% of currently developed pharmaceuticals contain at least one fluorine atom in the molecule.
- MeSH
- časové faktory MeSH
- faktorová analýza statistická MeSH
- fluor chemie MeSH
- krystalizace MeSH
- kyseliny heptylové chemie MeSH
- magnetická rezonanční spektroskopie metody MeSH
- prášková difrakce MeSH
- pyrroly chemie MeSH
- reprodukovatelnost výsledků MeSH
- spektroskopie infračervená s Fourierovou transformací metody MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
- srovnávací studie MeSH
Spray drying and hot-melt extrusion are among the most prevalent preparation techniques used in the pharmaceutical industry to produce amorphous solid dispersions (ASDs). This study advances previous research by integrating sample production, comprehensive analytical characterization, intrinsic dissolution rate measurements, and assessments of the behavior of ASDs under elevated temperature and humidity conditions. The study focuses on indomethacin, a widely used model for poorly soluble drugs, processed with PVP K30 or HPMC E5, both commonly used polymers. The findings demonstrate that hot-melt extruded samples exhibit superior stability against recrystallization, whereas spray dried samples achieve higher intrinsic dissolution rates. Furthermore, PVP K30 significantly outperforms HPMC E5 in the co-processing of indomethacin, enhancing both the intrinsic dissolution rate and the stability.
- MeSH
- deriváty hypromelózy chemie MeSH
- farmaceutická chemie metody MeSH
- indomethacin * chemie MeSH
- krystalizace * MeSH
- povidon chemie MeSH
- příprava léků metody MeSH
- rozpustnost * MeSH
- sprejové sušení * MeSH
- stabilita léku * MeSH
- technologie extruze tavenin * metody MeSH
- uvolňování léčiv MeSH
- vlhkost MeSH
- vysoká teplota MeSH
- vysoušení metody MeSH
- Publikační typ
- časopisecké články MeSH
