anatase TiO2
Dotaz
Zobrazit nápovědu
Nanoparticular form of titanium dioxide (TiO2 NPs) belongs to important industrial material. Despite being widely used, serious contradictions regarding biosafety of TiO2 NPs remain. We anticipate that such discrepancies could be due to a lack of understanding of a linkage between TiO2 NPs phase composition and cytotoxicity. Therefore, we synthesized two types of biphasic TiO2 NPs differing in an anatase-brookite phase composition. The study presents an array of in vitro data suggesting that TiO2 NPs with a prevailing anatase phase composition possess higher cytotoxicity compared to TiO2 NPs with an equal anatase-brookite crystallinity. This phenomenon was evidenced by significantly higher inhibition of metabolic activity and growth of epithelial and neuroblast-like cells. Moreover, anatase-prevailing TiO2 NPs tend to produce higher amount of reactive oxygen species resulting in DNA fragmentation. Further insights into the molecular aspects of cytotoxicity of anatase-prevailing TiO2 NPs were obtained by comparative proteomics delineating that TiO2 NPs deregulate expression of a variety of proteins and associated pathways. This inevitably results in a decreased cellular ability to detoxify reactive oxygen species and respond to various stress conditions. The study provides novel data that add another piece to the jigsaw of the relation between structural features of NPs and biosafety.
- MeSH
- buněčné linie MeSH
- epitelové buňky účinky léků metabolismus MeSH
- kovové nanočástice chemie toxicita ultrastruktura MeSH
- krystalografie rentgenová MeSH
- lidé MeSH
- nádorové buněčné linie MeSH
- oxidační stres * MeSH
- reaktivní formy kyslíku metabolismus MeSH
- titan chemie toxicita MeSH
- transmisní elektronová mikroskopie MeSH
- viabilita buněk účinky léků MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
Titanium oxide (TiO2) and iron oxide (α-Fe2O3) hematite films have potential applications as photoanodes in electrochemical water splitting. In the present work TiO2 and α-Fe2O3 thin films were prepared by two methods, e.g., sol-gel and High Power Impulse Magnetron Sputtering (HiPIMS) and judged on the basis of physical properties such as crystalline structure and surface topography and functional properties such as simulated photoelectrochemical (PEC) water splitting conditions. It was revealed that the HiPIMS method already provides crystalline structures of anatase TiO2 and hematite Fe2O3 during the deposition, whereas to finalize the sol-gel route the as-deposited films must always be annealed to obtain the crystalline phase. Regarding the PEC activity, both TiO2 films show similar photocurrent density, but only when illuminated by UV light. A different situation was observed for hematite films where plasmatic films showed a tenfold enhancement of the stable photocurrent density over the sol-gel hematite films for both UV and visible irradiation. The superior properties of plasmatic film could be explained by ability to address some of the hematite drawbacks by deposition of very thin films (25 nm) consisting of small densely packed particles and by doping with Sn.
The photocatalytic reduction of CO2 with H2O was investigated using Cu/TiO2 photocatalysts in aqueous solution. For this purpose, Cu/TiO2 photocatalysts (with 0.2, 0.9, 2, 4, and 6 wt.% of Cu) have been synthesized via sol-gel method. The photocatalysts were extensively characterized by means of inductively coupled plasma optical emission spectrometry (ICP-OES), N2 physisorption (BET), XRD, UV-vis DRS, FT-IR, Raman spectroscopy, TEM-EDX, and photoelectrochemical measurements. The as-prepared photocatalysts contain anatase as a major crystalline phase with a crystallite size around 13 nm. By increasing the amount of Cu, specific surface area and band gap energy decreased in addition to the formation of large agglomeration of CuO. Results revealed that the photocatalytic reduction of CO2 decreased in the presence of Cu/TiO2 in comparison to pure TiO2, which might be associated to the formation of CuO phase acting as a recombination center of generated electron-hole pair. Decreasing of photoactivity can also be connected with a very low position of conduction band of photocatalysts with high Cu content, which makes H2 production necessary for CO2 reduction more difficult.
BACKGROUND: The emergence of antibiotic resistance in pathogenic bacteria has become a global threat, encouraging the adoption of efficient and effective alternatives to conventional antibiotics and promoting their use as replacements. Titanium dioxide nanoparticles (TiO2 NPs) have been reported to exhibit antibacterial properties. In this study, we synthesized and characterized TiO2 NPs in anatase and rutile forms with surface modification by geraniol (GER). RESULTS: The crystallinity and morphology of modified TiO2 NPs were analyzed by UV/Vis spectrophotometry, X-ray powder diffraction (XRD), and scanning electron microscopy (SEM) with elemental mapping (EDS). The antimicrobial activity of TiO2 NPs with geraniol was assessed against Staphylococcus aureus, methicillin-resistant Staphylococcus aureus (MRSA), and Escherichia coli. The minimum inhibitory concentration (MIC) values of modified NPs ranged from 0.25 to 1.0 mg/ml against all bacterial strains, and the live dead assay and fractional inhibitory concentration (FIC) supported the antibacterial properties of TiO2 NPs with GER. Moreover, TiO2 NPs with GER also showed a significant decrease in the biofilm thickness of MRSA. CONCLUSIONS: Our results suggest that TiO2 NPs with GER offer a promising alternative to antibiotics, particularly for controlling antibiotic-resistant strains. The surface modification of TiO2 NPs by geraniol resulted in enhanced antibacterial properties against multiple bacterial strains, including antibiotic-resistant MRSA. The potential applications of modified TiO2 NPs in the biomedical and environmental fields warrant further investigation.
The paper addresses laboratory preparation, characterization and in vitro evaluation of antibacterial activity of graphite/TiO2 nanocomposites. Composites graphite/TiO2 with various ratio of TiO2 nanoparticles (30wt.%, and 50wt.%) to graphite were prepared using a thermal hydrolysis of titanylsulfate in the presence of graphite particles, and subsequently dried at 80°C. X-ray powder diffraction, transmission electron microscopy and Raman microspectroscopy served as phase-analytical methods distinguishing anatase and rutile phases in the prepared composites. Scanning and transmission electron microscopy techniques were used for characterization of morphology of the prepared samples. A developed modification of the standard microdilution test was used for in vitro evaluation of daylight induced antibacterial activity, using four common human pathogenic bacterial strains (Staphylococcus aureus, Escherichia coli, Enterococcus faecalis and Pseudomonas aeruginosa). Antibacterial activity of the graphite/TiO2 nanocomposites could be based mainly on photocatalytic reaction with subsequent potential interaction of reactive oxygen species with bacterial cells. During the antibacterial activity experiments, the graphite/TiO2 nanocomposites exhibited antibacterial activity, where differences in the onset of activity and activity against bacterial strains were observed. The highest antibacterial activity evaluated as minimum inhibitory concentration was observed against P. aeruginosa after 180min of irradiation.
- MeSH
- antibakteriální látky chemie farmakologie MeSH
- Bacteria účinky léků účinky záření MeSH
- grafit chemie MeSH
- lidé MeSH
- nanočástice chemie MeSH
- světlo * MeSH
- titan chemie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
The health effects of engineered nanoparticles in humans are not well-understood; however experimental data support the theory of oxidative stress promoting fibrogenesis and carcinogenicity. The aim of this study was to detect TiO2 particles in exhaled breath condensate (EBC) and urine samples to ascertain their presence and potential persistence and excretion in urine.EBC and urine samples were collected from 20 workers exposed to TiO2 aerosol; among them, 16 had a higher risk level of exposure (production workers) and four had medium risk level (research workers); in addition to 20 controls. Titanium levels in EBC and urine were analysed using the inductively coupled plasma mass spectrometry (ICP-MS) method. A Raman microspectroscopic analysis was performed in EBC and urine to identify the phase composition of TiO2 particles observed. Aerosol exposure in the workplaces was measured using SMPS and APS spectrometers and P-TRAK and DustTRAK DRX monitors.The median concentration of TiO2 aerosol was 1.98 × 10(4) particles cm(-3), the interquartile range (IQR) was 1.50 × 10(4) - 3.01 × 10(4) particles cm(-3) and the median mass concentration was 0.65 mg m(-3) (IQR 0.46-.0.83 mg m(-3)); 70-82% of the particles were smaller than 100 nm in diameter. In any part of the plant, the median TiO2 air concentration did not exceed the national airborne exposure limit of 10 mg m(-3) for inert dust. Particles of rutile and/or anatase were found in the EBC of exposed workers in 8/20 (40%) of the pre-shift and 14/20 (70%) of the post-shift samples. In the urine of workers, TiO2 particles were detected in 2/20 post-shift urine samples only. The mean concentration of titanium in the EBC in production workers was 24.1 ± 1.8 μg/l. In the research workers the values were below the limit of quantitation; LOQ = 4.0 ± 0.2 μg/l), as well as in the controls. In the urine samples of all of the subjects, titanium was under the limit of detection (LOD = 1.2 μg/l). Raman microanalysis of EBC in the workers confirmed the presence of TiO2 anatase and/or rutile crystal phases in the pre-shift samples and their persistence from previous shifts in the workers.
- MeSH
- dechové testy MeSH
- dospělí MeSH
- lidé MeSH
- oxidační stres účinky léků MeSH
- pracovní expozice * MeSH
- průřezové studie MeSH
- Ramanova spektroskopie metody MeSH
- titan analýza moč MeSH
- vydechnutí MeSH
- Check Tag
- dospělí MeSH
- lidé MeSH
- mužské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
The adhesion of TiO(2) (anatase structure) nanoparticles to kaolinite substrate was investigated using molecular modeling. Universal force field computation, density function theory computation, and a combination of both two approaches were used. This study enabled the adhesion energy for the TiO(2)/kaolinite nanocomposite to be estimated, and revealed the preferred orientation of the TiO(2) nanoparticles on the kaolinite substrate. The results of all three levels of computation were compared in order to show that the accuracy of universal force field computations is sufficient in this context. The role of nanoparticle size and the importance of the nanoparticle-substrate bonding contribution are presented here and discussed. A comparison of the molecular modeling results with scanning electron microscopy observations showed that the results of the modeling were consistent with the experimental data, and that this approach can be used to help characterize nanocomposites of the nanoparticle/phyllosilicate substrate type.
- MeSH
- kaolin chemie MeSH
- krystalografie MeSH
- kvantová teorie MeSH
- molekulární konformace MeSH
- molekulární modely MeSH
- nanočástice chemie ultrastruktura MeSH
- nanokompozity chemie ultrastruktura MeSH
- počítačová simulace MeSH
- povrchové vlastnosti MeSH
- termodynamika MeSH
- titan chemie MeSH
- velikost částic MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
A long-term exposition of antibiotics represents a serious problem for the environment, especially for human health. Heterogeneous photocatalysis opens a green way for their removal. Here, we correlated the structural-textural properties of TiO2 photocatalysts with their photocatalytic performance in ampicillin abatement. The tested nanoparticles included anatase and rutile and their defined mixtures. The nominal size range varied from 5 to 800 nm, Aeroxide P25 serving as an industrial benchmark reference. The degradation mechanism of photocatalytic ampicillin abatement was studied by employing both experimental (UPLC/MS/MS, hydroxyl radical scavenger) and theoretical (quantum calculations) approaches. Photocatalytic activity increased with the increasing particle size, generally, anatase being more active than rutile. Interestingly, in the dark, the ampicillin concentration decreased as well, especially in the presence of very small nanoparticles. Even if the photolysis of ampicillin was negligible, a very high degree of mineralization of antibiotic was achieved photocatalytically using the smallest nanoparticles of both allotropes and their mixtures. Furthermore, for anatase samples, the reaction rate constant increases with increasing crystallite size, while the degree of mineralization decreases. Importantly, the suggested degradation pathway mechanism determined by DFT modeling was in very good agreement with experimentally detected reaction products.
- Publikační typ
- časopisecké články MeSH
Nanostructured titanium(IV) oxide was used for the destructive adsorption and photocatalytic degradation of mitoxantrone (MTX), a cytostatic drug from the group of anthracycline antibiotics. During adsorption on a titania dioxide surface, four degradation products of MTX, mitoxantrone dicarboxylic acid, 1,4-dihydroxy-5-((2-((2-hydroxyethyl)amino)ethyl)amino)-8-((2-(methylamino)ethyl)amino)anthracene-9,10-dione, 1,4-dihydroxy-5,8-diiminoanthracene-9,10(5H,8H)-dione and 1,4-dihydroxy-5-imino-8-(methyleneamino)anthracene-9,10(5H,8H)-dione, were identified. In the case of photocatalytic degradation, only one degradation product after 15 min at m/z 472 was identified. This degradation product corresponded to mitoxantrone dicarboxylic acid, and complete mineralization was attained in one hour. Destructive adsorbent manganese(IV) oxide, MnO2, was used only for the destructive adsorption of MTX. Destructive adsorption occurred only for one degradation product, mitoxantrone dicarboxylic acid, against anatase TiO2.
The paper addresses laboratory preparation and antibacterial activity testing of kaolinite/nanoTiO2 composite in respect of the daylight irradiation time. Kaolinite/nanoTiO2 composites with 20 and 40 wt% of TiO2 were laboratory prepared, dried at 105 °C and calcined at 600 °C. The calcination caused transformation of kaolinite to metakaolinite and origination of the metakaolinite/nanoTiO2 composite. X-ray powder diffraction, Raman and FTIR spectroscopic methods revealed titanium dioxide only in the form of anatase in all evaluated samples (non-calcined and calcined) and also transformation of kaolinite to metakaolinite after the calcination treatment. Scanning electron microscopy was used as a method for characterization of morphology and elemental composition of the studied samples. A standard microdilution test was used to determine the antibacterial activity using four human pathogenic bacterial strains (Staphylococcus aureus, Escherichia coli, Enterococcus faecalis, Pseudomonas aeruginosa). A lamp with a wide spectrum bulb simulating daylight was used for induction of photocatalysis. The antibacterial assays found all the KATI samples to have antibacterial potency with different onset of the activity when calcined samples exhibited antibacterial activity earlier than the non-calcined. Significant difference in antibacterial activity of KATI samples for different bacterial strains was not observed.
- MeSH
- antibakteriální látky chemie farmakologie účinky záření MeSH
- Bacteria účinky léků MeSH
- časové faktory MeSH
- kaolin chemie účinky záření MeSH
- katalýza účinky záření MeSH
- nanočástice chemie účinky záření MeSH
- nanokompozity chemie účinky záření MeSH
- povrchové vlastnosti MeSH
- světlo * MeSH
- titan chemie účinky záření MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
