microstructure stability
Dotaz
Zobrazit nápovědu
OBJECTIVE: The mechanical properties and microstructure of the perineal body are important for the improvement of numerical models of pelvic organs. We determined the mechanical parameters and volume fractions of the ewe perineal body as an animal model. METHODS: The 39 specimens of 13 pregnant swifter ewes delivering by cesarean section (aged 2 years, weight 61.2 ± 6.2 kg (mean ± standard deviation) and 24 specimens of 8 postmenopausal swifter ewes 150 days after surgical ovariectomy (aged 7 years, 58.6 ± 4.6 kg)) were loaded uniaxially to determine Young's moduli of elasticity in the small (E0) and large (E1) deformation regions, and ultimate stresses and strains. The 63 adjacent tissue samples were processed histologically to assess volume fractions of smooth and skeletal muscle, adipose cells, elastin, and type I collagen using a stereological point testing grid. We compared the structural and mechanical differences along the ewe perineal body, and between pregnant and postmenopausal groups. RESULTS: The pregnant/postmenopausal perineal body was composed of smooth muscle (12/14%; median), skeletal muscle (12/16%), collagen (10/23%), elastin (8/7%), and adipose cells (6/6%). The E0 was 37/11 kPa (median), E1 was 0.97/1.04 MPa, ultimate stress was 0.55/0.59 MPa, and ultimate strain was 0.90/0.87 for pregnant/postmenopausal perineal body. The perineal body showed a structural and mechanical stability across the sites. The pregnant ewes had a higher amount of skeletal muscle, higher E0, and a less amount of collagen when compared with postmenopausal ewes. CONCLUSIONS: The data can be used as input for models simulating vaginal delivery, pelvic floor prolapsed, or dysfunction.
- MeSH
- biomechanika MeSH
- elastin analýza MeSH
- hladké svalstvo anatomie a histologie fyziologie MeSH
- kolagen analýza MeSH
- kosterní svaly anatomie a histologie fyziologie MeSH
- modely u zvířat MeSH
- ovce MeSH
- perineum anatomie a histologie fyziologie MeSH
- postmenopauza MeSH
- těhotenství MeSH
- tukové buňky MeSH
- zvířata MeSH
- Check Tag
- těhotenství MeSH
- ženské pohlaví MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
- srovnávací studie MeSH
The performance of a pharmaceutical formulation, such as the drug (API) release rate, is significantly influenced by the properties of the materials used, the composition of the final product and the tablet compression process parameters. However, in some cases, the knowledge of these input parameters does not necessarily provide a reliable description or prediction of tablet performance. Therefore, the knowledge of tablet microstructure is desirable to understand such formulations. Commonly used analytical techniques, such as X-ray tomography and intrusion mercury porosimetry, are not widely used in pharmaceutical companies due to their price and/or toxicity, and therefore, efforts are made to develop a tool for fast and easy microstructure description. In this work, we have developed an image-based method for microstructure description and applied it to a model system consisting of ibuprofen and CaHPO4∙2H2O (API and excipient with different deformability). The obtained parameter, the quadratic mean of the equivalent diameter of the non-deformable, brittle excipient CaHPO4∙2H2O, was correlated with tablet composition, compression pressure and API release rate. The obtained results demonstrate the possibility of describing the tablet dissolution performance in the presented model system based on the microstructural parameter, providing a possible model system for compressed solid dosage forms in which a plastic component is present and specific API release is required.
- MeSH
- biologické modely * MeSH
- ibuprofen chemie MeSH
- pomocné látky * chemie MeSH
- příprava léků MeSH
- tablety chemie MeSH
- Publikační typ
- časopisecké články MeSH
Biophysical properties and microstructural changes of swelling cornea which caused by endothelial cells damage will be evaluated. Swelling cornea models were established by endothelial cells damage in 114 Sprague Dawley rats. Relative gray value, swelling rate and light transmittance were measured to evaluated the biophysical properties and microstructure changes were observed by transmission electron microscopy. Relative gray value decreased while swelling rate rose along with time and both of them reached relative stability after 7 days. Light transmittance showed a decline trend with time even after corneal thickness had reached stable stage. Observed by transmission electron microscopy, interfibrillar distance increased, fewer proteoglycans coating appeared and remnants proteoglycan branches became thinner and longer in 7 days. Diameter of fibrils didn't change obviously with time. In cornea edema models caused by endothelial cells damage, the changes of biophysical property and microstructure can help us evaluate corneal edema accurately and objectively.
- MeSH
- endoteliální buňky ultrastruktura MeSH
- fotografování MeSH
- modely nemocí na zvířatech MeSH
- potkani Sprague-Dawley MeSH
- rohovkový endotel diagnostické zobrazování ultrastruktura MeSH
- stroma rohovky MeSH
- transmisní elektronová mikroskopie MeSH
- úbytek endoteliálních buněk rohovky diagnostické zobrazování patologie MeSH
- ultrasonografie MeSH
- zvířata MeSH
- Check Tag
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
Background Previous functional and structural imaging studies have revealed that subcortical structures play a key a role in pain processing. The recurring painful episodes might trigger maladaptive plasticity or alternatively degenerative processes that might be detected by MRI as changes in size or microstructure. In the current investigation, we aimed to identify the macro- and microstructural alterations of the subcortical structures in episodic cluster headache. Methods High-resolution T1-weighted and diffusion-weighted MRI images with 60 gradient directions were acquired from 22 patients with cluster headache and 94 healthy controls. Surface-based segmentation analysis was used to measure the volume of the subcortical nuclei, and mean diffusion parameters (fractional anisotropy, mean, radial and axial diffusivity) were determined for these structures. In order to understand whether the size and diffusion parameters could be investigated in a headache lateralised manner, first the asymmetry of the size and diffusion parameters of the subcortical structures was analysed. Volumes and diffusion parameters were compared between groups and correlated with the cumulative number of headache days. To account for the different size of the patient and control group, a bootstrap approach was used to investigate the stability of the findings. Results A significant lateralisation of the size (caudate, putamen and thalamus) and the diffusion parameters of the subcortical structures were found in normal controls. In cluster headache patients, the mean fractional anisotropy of the right amygdalae, the mean axial and mean diffusivity of the right caudate nucleus and the radial diffusivity of the right pallidum were higher. The mean anisotropy of the right pallidum was lower in patients. Conclusion The analysis of the pathology in the subcortical structures in episodic cluster headache reveals important features of the disease, which might allow a deeper insight into the pathomechanism of the pain processing in this headache condition.
- MeSH
- cluster headache diagnostické zobrazování patologie MeSH
- dospělí MeSH
- interpretace obrazu počítačem metody MeSH
- lidé středního věku MeSH
- lidé MeSH
- mladiství MeSH
- mladý dospělý MeSH
- mozek diagnostické zobrazování patologie MeSH
- senioři nad 80 let MeSH
- senioři MeSH
- zobrazování difuzních tenzorů metody MeSH
- Check Tag
- dospělí MeSH
- lidé středního věku MeSH
- lidé MeSH
- mladiství MeSH
- mladý dospělý MeSH
- mužské pohlaví MeSH
- senioři nad 80 let MeSH
- senioři MeSH
- ženské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
The use of non-standard low-temperature conditions in environmental scanning electron microscopy might be promising for the observation of coniferous tissues in their native state. This study is aimed to analyse and evaluate the method based on the principle of low-temperature sample stabilization. We demonstrate that the upper mucous layer is sublimed and a microstructure of the sample surface can be observed with higher resolution at lower gas pressure conditions, thanks to a low-temperature method. An influence of the low-temperature method on sample stability was also studied. The results indicate that high-moisture conditions are not suitable for this method and often cause the collapse of samples. The potential improvement of stability to beam damage has been demonstrated by long-time observation at different operation parameters. We finally show high applicability of the low-temperature method on different types of conifers and Oxalis acetosella.
Zinc oxide/cellulose nanocrystal (ZnO/CNC) hybrids with modulated morphologies were prepared by using bamboo CNC as templates via green one-step technique. The effect of pH values on the morphology, microstructure, thermal stability, antibacterial efficiency and dye absorption kinetics of hybrids were investigated. A possible mechanism for various hybrid morphologies at different pH values was provided. All the samples exhibited high antibacterial ratios of 91.4%-99.8% against both Escherichia coli and Staphylococcus aureus. ZnO/CNC8.5 gave quick removal efficiency with high dye removal ratios in methylene blue (MB, 93.55%) and malachite green (MG, 99.02%), especially >91.47% and 97.85% within 5 min. The absorption capacity could reach up to 46.77 mg/g for MB and 49.51 mg/g for MG. Besides, absorption kinetics showed that the absorption behavior followed the pseudo-second-order kinetic model (R2 > 0.99996). Such ZnO/CNC hybrids show outstanding and low-cost adsorbent for efficient absorption of cationic dyes in wastewater treatment field.
- MeSH
- antibakteriální látky chemie farmakologie MeSH
- barvicí látky chemie izolace a purifikace MeSH
- celulosa chemie MeSH
- čištění vody MeSH
- Escherichia coli účinky léků MeSH
- fyzikální absorpce * MeSH
- kinetika MeSH
- koncentrace vodíkových iontů MeSH
- methylenová modř chemie izolace a purifikace MeSH
- nanočástice chemie MeSH
- odpadní voda chemie MeSH
- oxid zinečnatý chemie farmakologie MeSH
- rosanilinová barviva chemie izolace a purifikace MeSH
- Staphylococcus aureus účinky léků MeSH
- techniky syntetické chemie MeSH
- technologie zelené chemie MeSH
- teplota MeSH
- Publikační typ
- časopisecké články MeSH
Particle size reduction to sub-micrometer dimensions in stirred media mills is an increasingly common formulation strategy used for improving the bioavailability of poorly aqueous soluble active pharmaceutical ingredients (APIs). Due to their hydrophobic character, the API particles need to be stabilised by a surfactant in order to form a stable nano-suspension. This work is concerned with the understanding of an undesired phenomenon often encountered during the development and scale-up of wet nano-milling processes for hydrophobic APIs - the formation of foams. We investigate the microstructure, rheology and stability of these foams, and find them to be Pickering foams stabilised by solid particles at the gas-liquid interface rather than by a surfactant. By exploring the effect of surfactant concentration on the on-set of foaming in conjunction with the milling kinetics, we find a relationship between the specific surface area of the nano-suspension, the quantity of surfactant present in the formulation and the occurrence of foaming. We propose a mechanistic explanation of foam formation, and find that in order to prevent foaming, a large surfactant excess of approx. 100x above the critical micelle concentration has to be present in the solution in order to ensure a sufficiently rapid coverage of freshly exposed hydrophobic surfaces formed during the wet nano-milling process.
Freezing and lyophilization have been utilized for decades to stabilize pharmaceutical and food products. Freezing a solution that contains dissolved salt and/or organic matter produces pure primary ice crystal grains separated by freeze-concentrated solutions (FCS). The microscopic size of the primary ice crystals depends on the cooling conditions and the concentration of the solutes. It is generally accepted that primary ice crystals size influences the rate of sublimation and also can impact physico-chemical behaviour of the species in the FCS. This article, however, presents a case where the secondary ice formed inside the FCS plays a critical role. We microscoped the structures of ice-cast FCS with an environmental scanning electron microscope and applied the aggregation-sensitive spectroscopic probe methylene blue to determine how the microstructure affects the molecular arrangement. We show that slow cooling at -50 °C produces large salt crystals with a small specific surface, resulting in a high degree of molecular aggregation within the FCS. In contrast, fast liquid nitrogen cooling yields an ultrafine structure of salt crystals having a large specific surface area and, therefore, inducing smaller aggregation. The study highlights a critical role of secondary ice in solute aggregation and introduces methylene blue as a molecular probe to investigate freezing behaviour of aqueous systems with crystalline solute.
- MeSH
- led * MeSH
- lyofilizace MeSH
- methylenová modř * MeSH
- roztoky MeSH
- voda chemie MeSH
- zmrazování MeSH
- Publikační typ
- časopisecké články MeSH
The structure degradation and strength changes of calcium phosphate scaffolds after long-term exposure to an acidic environment simulating the osteoclastic activity were determined and compared. Sintered calcium phosphate scaffolds with different phase structures were prepared with a similar cellular pore structure and an open porosity of over 80%. Due to microstructural features the biphasic calcium phosphate (BCP) scaffolds had a higher compressive strength of 1.7 MPa compared with the hydroxyapatite (HA) and β-tricalcium phosphate (TCP) scaffolds, which exhibited a similar strength of 1.2 MPa. After exposure to an acidic buffer solution of pH = 5.5, the strength of the HA scaffolds did not change over 14 days. On the other hand, the strength of the TCP scaffolds decreased steeply in the first 2 days and reached a negligible value of 0.09 MPa after 14 days. The strength of the BCP scaffolds showed a steady decrease with a reasonable value of 0.5 MPa after 14 days. The mass loss, phase composition and microstructural changes of the scaffolds during degradation in the acidic environment were investigated and a mechanism of scaffold degradation was proposed. The BCP scaffold showed the best cell response in the in vitro tests. The BCP scaffold structure with the highly soluble phase (α-TCP) embedded in a less soluble matrix (β-TCP/HA) exhibited a controllable degradation with a suitable strength stability and with beneficial biological behavior it represented the preferred calcium phosphate structure for a resorbable bone scaffold.
- MeSH
- buněčná adheze MeSH
- DNA metabolismus MeSH
- fosforečnany vápenaté chemie MeSH
- keramika chemie MeSH
- koncentrace vodíkových iontů MeSH
- kosti a kostní tkáň fyziologie MeSH
- lidé MeSH
- mezenchymální kmenové buňky cytologie MeSH
- pevnost v tlaku MeSH
- poréznost MeSH
- tkáňové podpůrné struktury chemie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
