• MeSH
• elektroencefalografie MeSH
• mapování mozku MeSH
• počítačová simulace MeSH
• využití lékařské informatiky MeSH

• Konspekt
• Patologie. Klinická medicína
• NLK Obory
• neurologie
• NLK Publikační typ
• studie

• MeSH
• adsorpce MeSH
• elektrolyty MeSH
• fibrinogen analýza   chemie   ultrastruktura   MeSH
• sekundární struktura proteinů MeSH
• spektroskopie infračervená s Fourierovou transformací MeSH

PURPOSE: The tear film lipid layer (TFLL) covers the tear film, stabilizing it and providing a protective barrier against the environment. The TFLL is divided into polar and non-polar sublayers, but the interplay between lipid classes in these sublayers and the structure-function relationship of the TFLL remains poorly characterized. This study aims to provide insight into TFLL function by elucidating the interactions between polar and non-polar TFLL lipids at the molecular level. METHODS: Mixed films of polar O-acyl-ω-hydroxy fatty acids (OAHFA) or phospholipids and non-polar cholesteryl esters (CE) were used as a model of the TFLL. The organization of the films was studied by using a combination of Brewster angle and fluorescence microscopy in a Langmuir trough system. In addition, the evaporation resistance of the lipid films was evaluated. RESULTS: Phospholipids and OAHFAs induced the formation of a stable multilamellar CE film. The formation of this film was driven by the interdigitation of acyl chains between the monolayer of polar lipids and the CE multilayer lamellae. Surprisingly, the multilayer structure was destabilized by both low and high concentrations of polar lipids. In addition, the CE multilayer was no more effective in resisting the evaporation of water than a polar lipid monolayer. CONCLUSIONS: Formation of multilamellar films by major tear film lipids suggest that the TFLL may have a similar structure. Moreover, in contrast to the current understanding, polar TFLL lipids may not mainly act by stabilizing the non-polar TFLL sublayer, but through a direct evaporation resistant effect.

• MeSH
• estery cholesterolu MeSH
• lipidy MeSH
• mastné kyseliny MeSH
• slzy * MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

• Klíčová slova
• Zobrazovací metody,
• MeSH
• elektroencefalografie MeSH
• mapování mozku MeSH
• počítačová simulace MeSH
• využití lékařské informatiky MeSH

• NLK Obory
• neurologie

The myelin sheath is an essential, multilayered membrane structure that insulates axons, enabling the rapid transmission of nerve impulses. The tetraspan myelin proteolipid protein (PLP) is the most abundant protein of compact myelin in the central nervous system (CNS). The integral membrane protein PLP adheres myelin membranes together and enhances the compaction of myelin, having a fundamental role in myelin stability and axonal support. PLP is linked to severe CNS neuropathies, including inherited Pelizaeus-Merzbacher disease and spastic paraplegia type 2, as well as multiple sclerosis. Nevertheless, the structure, lipid interaction properties, and membrane organization mechanisms of PLP have remained unidentified. We expressed, purified, and structurally characterized human PLP and its shorter isoform DM20. Synchrotron radiation circular dichroism spectroscopy and small-angle X-ray and neutron scattering revealed a dimeric, α-helical conformation for both PLP and DM20 in detergent complexes, and pinpoint structural variations between the isoforms and their influence on protein function. In phosphatidylcholine membranes, reconstituted PLP and DM20 spontaneously induced formation of multilamellar myelin-like membrane assemblies. Cholesterol and sphingomyelin enhanced the membrane organization but were not crucial for membrane stacking. Electron cryomicroscopy, atomic force microscopy, and X-ray diffraction experiments for membrane-embedded PLP/DM20 illustrated effective membrane stacking and ordered organization of membrane assemblies with a repeat distance in line with CNS myelin. Our results shed light on the 3D structure of myelin PLP and DM20, their structure-function differences, as well as fundamental protein-lipid interplay in CNS compact myelin.

• MeSH
• axony metabolismus   MeSH
• centrální nervový systém metabolismus   MeSH
• lidé MeSH
• lipidové dvojvrstvy * metabolismus   MeSH
• myelinová pochva metabolismus   MeSH
• myelinový proteolipidový protein * metabolismus   MeSH
• protein - isoformy metabolismus   MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• časopisecké články MeSH

Retroviruses assemble and bud from infected cells in an immature form and require proteolytic maturation for infectivity. The CA (capsid) domains of the Gag polyproteins assemble a protein lattice as a truncated sphere in the immature virion. Proteolytic cleavage of Gag induces dramatic structural rearrangements; a subset of cleaved CA subsequently assembles into the mature core, whose architecture varies among retroviruses. Murine leukemia virus (MLV) is the prototypical γ-retrovirus and serves as the basis of retroviral vectors, but the structure of the MLV CA layer is unknown. Here we have combined X-ray crystallography with cryoelectron tomography to determine the structures of immature and mature MLV CA layers within authentic viral particles. This reveals the structural changes associated with maturation, and, by comparison with HIV-1, uncovers conserved and variable features. In contrast to HIV-1, most MLV CA is used for assembly of the mature core, which adopts variable, multilayered morphologies and does not form a closed structure. Unlike in HIV-1, there is similarity between protein-protein interfaces in the immature MLV CA layer and those in the mature CA layer, and structural maturation of MLV could be achieved through domain rotations that largely maintain hexameric interactions. Nevertheless, the dramatic architectural change on maturation indicates that extensive disassembly and reassembly are required for mature core growth. The core morphology suggests that wrapping of the genome in CA sheets may be sufficient to protect the MLV ribonucleoprotein during cell entry.

• MeSH
• elektronová kryomikroskopie MeSH
• genové produkty gag chemie   genetika   ultrastruktura   MeSH
• HEK293 buňky MeSH
• HIV-1 chemie   genetika   ultrastruktura   MeSH
• kapsida chemie   ultrastruktura   MeSH
• krystalografie rentgenová MeSH
• kvarterní struktura proteinů MeSH
• lidé MeSH
• molekulární modely MeSH
• myši MeSH
• proteinové domény MeSH
• sekvence aminokyselin MeSH
• sekvenční homologie aminokyselin MeSH
• tomografie elektronová MeSH
• virion chemie   genetika   ultrastruktura   MeSH
• virové plášťové proteiny chemie   genetika   ultrastruktura   MeSH
• virus myší leukemie chemie   genetika   ultrastruktura   MeSH
• zvířata MeSH
• Check Tag
• lidé MeSH
• myši MeSH
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH
• Research Support, N.I.H., Intramural MeSH
• srovnávací studie MeSH

Local chemotherapy using polymer drug delivery systems has the potential to treat some cancers, including intraocular retinoblastoma, which is difficult to treat with systemically delivered drugs. Well-designed carriers can provide the required drug concentration at the target site over a prolonged time, reduce the overall drug dose needed, and suppress severe side effects. Herein, nanofibrous carriers of the anticancer agent topotecan (TPT) with a multilayered structure composed of a TPT-loaded inner layer of poly(vinyl alcohol) (PVA) and outer covering layers of polyurethane (PUR) are proposed. Scanning electron microscopy showed homogeneous incorporation of TPT into the PVA nanofibers. HPLC-FLD proved the good loading efficiency of TPT (≥85%) with a content of the pharmacologically active lactone TPT of more than 97%. In vitro release experiments demonstrated that the PUR cover layers effectively reduced the initial burst release of hydrophilic TPT. In a 3-round experiment with human retinoblastoma cells (Y-79), TPT showed prolonged release from the sandwich-structured nanofibers compared with that from a PVA monolayer, with significantly enhanced cytotoxic effects as a result of an increase in the PUR layer thickness. The presented PUR-PVA/TPT-PUR nanofibers appear to be promising carriers of active TPT lactone that could be useful for local cancer therapy.

• Publikační typ
• časopisecké články MeSH

The main goal of this study is to demonstrate the possibility of training the Neural Network (multilayer perceptron) classifier and preprocessing units simultaneously, i.e., that properties of preprocessing are chosen automatically during the training phase. In the first realization step, adaptive recursive estimation of the power within a frequency band was used as a preprocessing unit. To improve the efficiency of special units, the power and momentary frequency estimation was replaced by methods that are based on adaptive Hilbert transformers. The strategy was developed to obtain optimized recognition units that can be efficiently integrated into strategies for monitoring the cerebral status of neonates. Therefore, applications (e.g., in neonatal EEG pattern recognition) will be shown. Additionally, a method of minimizing the error function was used, where this minimization is based on optimizing the network structure. The results of structure optimization in the field of EEG pattern recognition in epileptic patients can be demonstrated.

• MeSH
• algoritmy MeSH
• elektroencefalografie * MeSH
• epilepsie diagnóza   patofyziologie   MeSH
• fuzzy logika MeSH
• lidé MeSH
• neuronové sítě * MeSH
• novorozenec MeSH
• rozpoznávání automatizované * MeSH
• Check Tag
• lidé MeSH
• novorozenec MeSH

Liposomes are essentially a subtype of nanoparticles comprising a hydrophobic tail and a hydrophilic head constituting a phospholipid membrane. The spherical or multilayered spherical structures of liposomes are highly rich in lipid contents with numerous criteria for their classification, including structural features, structural parameters, and size, synthesis methods, preparation, and drug loading. Despite various liposomal applications, such as drug, vaccine/gene delivery, biosensors fabrication, diagnosis, and food products applications, their use encounters many limitations due to physico-chemical instability as their stability is vigorously affected by the constituting ingredients wherein cholesterol performs a vital role in the stability of the liposomal membrane. It has well established that cholesterol exerts its impact by controlling fluidity, permeability, membrane strength, elasticity and stiffness, transition temperature (Tm), drug retention, phospholipid packing, and plasma stability. Although the undetermined optimum amount of cholesterol for preparing a stable and controlled release vehicle has been the downside, but researchers are still focused on cholesterol as a promising material for the stability of liposomes necessitating explanation for the stability promotion of liposomes. Herein, the prior art pertaining to the liposomal appliances, especially for drug delivery in cancer therapy, and their stability emphasizing the roles of cholesterol.

• Publikační typ
• časopisecké články MeSH
• přehledy MeSH

The direct tailoring of the size, composition, or number of layers belongs to the advantages of 3D printing employment in producing orodispersible films (ODFs) compared to the frequently utilized solvent casting method. This study aimed to produce porous ODFs as a substrate for medicated ink deposited by a 2D printer. The innovative semi-solid extrusion 3D printing method was employed to produce multilayered ODFs, where the bottom layer assures the mechanical properties. In contrast, the top layer provides a porous structure for ink entrapment. Hydroxypropyl methylcellulose and polyvinyl alcohol were utilized as film-forming polymers, glycerol as a plasticizer, and sodium starch glycolate as a disintegrant in the bottom matrix. Several porogen agents (Aeroperl® 300, Fujisil®, Syloid® 244 FP, Syloid® XDP 3050, Neusilin® S2, Neusilin® US2, and Neusilin® UFL2) acted as porosity enhancers in the two types of top layer. ODFs with satisfactory disintegration time were prepared. The correlation between the porogen content and the mechanical properties was proved. A porous ODF structure was detected in most samples and linked to the porogen content. SSE 3D printing represents a promising preparation method for the production of porous ODFs as substrates for subsequent drug deposition by 2D printing, avoiding the difficulties arising in casting or printing medicated ODFs directly.

• Publikační typ
• časopisecké články MeSH