OBJECTIVES: To evaluate the effect of short-term inhalational exposure to nanoparticles released during dental composite grinding on oxidative stress and antioxidant capacity markers. MATERIALS AND METHODS: Twenty-four healthy volunteers were examined before and after exposure in dental workshop. They spent 76.8 ± 0.7 min in the testing room during grinding of dental nanocomposites. The individual exposure to aerosol particles in each participant ́s breathing zones was monitored using a personal nanoparticle sampler (PENS). Exhaled breath condensate (EBC), blood, and urine samples were collected pre- and post-exposure to measure one oxidative stress marker, i.e., thiobarbituric acid reactive substances (TBARS), and two biomarkers of antioxidant capacity, i.e., ferric-reducing antioxidant power (FRAP) and reduced glutathione (GSH) by spectrophotometry. Spirometry and fractional exhaled nitric oxide (FeNO) were used to evaluate the effect of acute inhalational exposure. RESULTS: Mean mass of dental nanocomposite ground away was 0.88 ± 0.32 g. Average individual doses of respirable particles and nanoparticles measured by PENS were 380 ± 150 and 3.3 ± 1.3 μg, respectively. No significant increase of the post-exposure oxidative stress marker TBARS in EBC and plasma was seen. No decrease in antioxidant capacity biomarkers FRAP and GSH in EBC post-exposure was seen, either. Post-exposure, conjunctival hyperemia was seen in 62.5% volunteers; however, no impairment in spirometry or FeNO results was observed. No correlation of any biomarker measured with individual exposure was found, however, several correlations with interfering factors (age, body mass index, hypertension, dyslipidemia, and environmental pollution parameters) were seen. CONCLUSIONS: This study, using oxidative stress biomarker and antioxidant capacity biomarkers in biological fluids of volunteers during the grinding of dental nanocomposites did not prove a negative effect of this intense short-term exposure. However, further studies are needed to evaluate oxidative stress in long-term exposure of both stomatologists and patients and diverse populations with varying health statuses.
- MeSH
- antioxidancia analýza MeSH
- biologické markery * analýza MeSH
- dechové testy MeSH
- dospělí MeSH
- glutathion analýza MeSH
- inhalační expozice * škodlivé účinky analýza MeSH
- látky reagující s kyselinou thiobarbiturovou analýza MeSH
- lidé MeSH
- nanokompozity * chemie MeSH
- oxid dusnatý analýza metabolismus MeSH
- oxidační stres * MeSH
- pracovní expozice * analýza škodlivé účinky MeSH
- zubní lékaři MeSH
- zubní materiály MeSH
- Check Tag
- dospělí MeSH
- lidé MeSH
- mužské pohlaví MeSH
- ženské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
The aim of this study was to develop multifunctional magnetic poly(ε-caprolactone) (PCL) mats with antibacterial properties for bone tissue engineering and osteosarcoma prevention. To provide good dispersion of magnetic iron oxide nanoparticles (IONs), they were first grafted with PCL using a novel three-step approach. Then, a series of PCL-based mats containing a fixed amount of ION@PCL particles and an increasing content of ascorbic acid (AA) was prepared by electrospinning. AA is known for increasing osteoblast activity and suppressing osteosarcoma cells. Composites were characterized in terms of morphology, mechanical properties, hydrolytic stability, antibacterial performance, and biocompatibility. AA affected both the fiber diameter and the mechanical properties of the nanocomposites. All produced mats were nontoxic to rat bone marrow-derived mesenchymal cells; however, a composite with 5 wt.% of AA suppressed the initial proliferation of SAOS-2 osteoblast-like cells. Moreover, AA improved antibacterial properties against Staphylococcus aureus and Escherichia coli compared to PCL. Overall, these magnetic composites, reported for the very first time, can be used as scaffolds for both tissue regeneration and osteosarcoma prevention.
- MeSH
- antibakteriální látky chemie farmakologie MeSH
- Escherichia coli účinky léků MeSH
- kosti a kostní tkáň MeSH
- krysa rodu rattus MeSH
- kyselina askorbová * chemie farmakologie MeSH
- lidé MeSH
- magnetické nanočástice chemie MeSH
- nádorové buněčné linie MeSH
- nanokompozity chemie MeSH
- osteoblasty metabolismus cytologie MeSH
- osteosarkom patologie MeSH
- polyestery * chemie MeSH
- Staphylococcus aureus * účinky léků růst a vývoj MeSH
- testování materiálů MeSH
- tkáňové inženýrství * MeSH
- tkáňové podpůrné struktury chemie MeSH
- zvířata MeSH
- Check Tag
- krysa rodu rattus MeSH
- lidé MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
Aim: Today, there is a lack of research studies concerning human acute exposure to nanoparticles (NPs). Our investigation aimed to simulate real-world acute inhalation exposure to NPs released during work with dental nanocomposites in a dental office or technician laboratory. Methods: Blood samples from female volunteers were processed before and after inhalation exposure. Transcriptomic mRNA and miRNA expression changes were analyzed. Results: We detected large interindividual variability, 90 significantly deregulated mRNAs, and 4 miRNAs when samples of participants before and after dental nanocomposite grinding were compared. Conclusion: The results suggest that inhaled dental NPs may present an occupational hazard to human health, as indicated by the changes in the processes related to oxidative stress, synthesis of eicosanoids, and cell division.
- MeSH
- dospělí MeSH
- inhalační expozice * škodlivé účinky MeSH
- lidé MeSH
- messenger RNA genetika MeSH
- mikro RNA * genetika MeSH
- nanočástice chemie MeSH
- nanokompozity * chemie MeSH
- oxidační stres účinky léků MeSH
- pracovní expozice škodlivé účinky MeSH
- transkriptom * účinky léků MeSH
- Check Tag
- dospělí MeSH
- lidé MeSH
- ženské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
Nanoparticles (NPs) have become an important part of everyday life, including their application in dentistry. Aside from their undoubted benefits, questions regarding their risk to human health, and/or genome have arisen. However, studies concerning cytogenetic effects are completely absent. A group of women acutely exposed to an aerosol released during dental nanocomposite grinding was sampled before and after the work. Exposure monitoring including nano (PM0.1) and respirable (PM4) fractions was performed. Whole-chromosome painting for autosomes #1, #4, and gonosome X was applied to estimate the pattern of cytogenetic damage including structural and numerical alterations. The results show stable genomic frequency of translocations (FG/100), in contrast to a significant 37.8% (p<0.05) increase of numerical aberrations caused by monosomies (p<0.05), but not trisomies. Monosomies were mostly observed for chromosome X. In conclusion, exposure to nanocomposites in stomatology may lead to an increase in numerical aberrations which can be dangerous for dividing cells.
- MeSH
- chromozomální aberace MeSH
- dospělí MeSH
- lidé středního věku MeSH
- lidé MeSH
- malování chromozomů MeSH
- nanokompozity * toxicita chemie MeSH
- pracovní expozice * škodlivé účinky MeSH
- zubní materiály toxicita MeSH
- Check Tag
- dospělí MeSH
- lidé středního věku MeSH
- lidé MeSH
- ženské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
- MeSH
- dospělí MeSH
- lidé středního věku MeSH
- lidé MeSH
- mladiství MeSH
- nanokompozity terapeutické užití MeSH
- trvalá zubní náhrada * MeSH
- zubní materiály terapeutické užití MeSH
- Check Tag
- dospělí MeSH
- lidé středního věku MeSH
- lidé MeSH
- mladiství MeSH
- mužské pohlaví MeSH
- ženské pohlaví MeSH
- Publikační typ
- kazuistiky MeSH
Synthetic food colorants are extensively used across the globe regardless of the fact that they induce deleterious side effects when used in higher amounts. In this work, a novel electrochemical sensor based on nickel nanoparticles doped lettuce-like Co3O4 anchored graphene oxide (GO) nanosheets was developed for effective detection of sulfonated azo dye sunset yellow widely used as a food colorant. Hydrothermal synthesis was adopted for the preparation of lettuce-like spinel Co3O4 nanoparticles and Ni-Co3O4 NPs/GO nanocomposite was prepared using ecofriendly and economical sonochemical method. The prepared ternary nanocomposite meticulously fabricated on a screen-printed carbon electrode exhibited remarkable electrocatalytic activity towards sunset yellow determination. This is apparent from the resultant well-defined and intense redox peak currents of Ni-Co3O4 NPs/GO nanocomposite modified electrode at very low potentials. The developed sunset yellow sensor exhibited a high sensitivity of 4.16 μA μM-1 cm-2 and a nanomolar detection limit of 0.9 nM in the linear range 0.125-108.5 μM. Furthermore, experiments were conducted to affirm excellent stability, reproducibility, repeatability, and selectivity of proposed sensor. The practicality of sunset yellow determination using the developed sensor was analyzed in different varieties of food samples including jelly, soft drink, ice cream, and candy resulting in recovery in the range of 96.16%-102.56%.
- MeSH
- azosloučeniny analýza MeSH
- elektrochemické techniky metody MeSH
- grafit MeSH
- kobalt chemie MeSH
- kovové nanočástice chemie MeSH
- limita detekce MeSH
- lineární modely MeSH
- nanokompozity chemie MeSH
- nikl chemie MeSH
- oxid hlinitý chemie MeSH
- oxid hořečnatý chemie MeSH
- oxidy chemie MeSH
- potravinářská barviva analýza MeSH
- reprodukovatelnost výsledků MeSH
- Publikační typ
- časopisecké články MeSH
MXenes and their related nanocomposites with superior physicochemical properties such as high surface area, ease of synthesis and functionalization, high drug loading capacity, collective therapy potentials, pH-triggered drug release behavior, high photothermal conversion, and excellent photodynamic efficiency have been explored as alluring materials in photomedicine; the application of photons in medicine is facilitated for imaging and various disease treatment methods such as photothermal cancer/tumor ablation. Non-invasive theranostic strategies with synergistic activities have been developed using photothermal, photodynamic, and magnetic therapies together with remotely controlled drug/gene delivery for the diagnosis and treatment of various malignant diseases. Photothermal/photodynamic therapy and photoacoustic imaging using MXene-based structures have shown great promise in cancer phototherapy. However, hybridization and surface functionalization should be further explored to obtain biocompatible MXene-based composites/platforms with unique properties, high stability, and improved functionality in photomedicine. Toxicological and long-term biosafety assessments as well as clinical translation evaluations ought to be given high priority in research. Although some limited studies have revealed the excellent potentials of MXenes and their derivatives in photomedicine, further steps should be taken towards extensive research and detailed analysis in the field of optimizing the properties and improving the performance of these materials with a clinical and industrial outlook. Optical biosensing platforms have been developed along with electrochemical sensors and wearable sensors constructed from MXenes and their derivatives; future studies warrant the comprehensive analysis of optical transduction aspects such as colorimetry, electrochemiluminescence, photoluminescence, surface-enhanced Raman scattering, and surface plasmon resonance. Herein, the potentials of MXenes in photomedicine are deliberated encompassing important challenges and future research directions.
- MeSH
- fotochemoterapie * MeSH
- fototerapie metody MeSH
- indukovaná hypertermie * metody MeSH
- lidé MeSH
- nádory * diagnostické zobrazování farmakoterapie MeSH
- nanokompozity * chemie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- přehledy MeSH
Every year many drug molecules discovered to be effective in treatment of many diseases, however not all of these drugs succeed in reaching the market. One of the main reasons for such failure is the lipophilicity or low water solubility of these chemicals which results in poor bioavailability. Nanoemulsion has the ability to deliver these drugs in an efficient way. Nanoemulsion, which is usually o/w emulsion can incorporate this lipophilic drug into nanolipoidal droplets. However, the difficulty in applying liquid dosage form can be overcome by using nanoemulgel system. Nanoemulgel considered as a suitable way to deliver lipophilic drugs through topical route. This review tries to highlight the importance of nanoemulgel as a drug delivery system. The components of the systems have been explored and the methods of preparations including high energy methods and low energy methods have been discussed. Different methods were used in characterization of such delivery system; all of these methods and techniques were reviewed briefly. Finally, the recent researches about different applications of emulgel in local delivery or systemic delivery has been discussed. To conclude, the nanoemulgel applications in drug delivery is very promising and many products will find their way to the markets soon.
Metal-organic frameworks (MOFs) have been widely used as porous nanomaterials for different applications ranging from industrial to biomedicals. An unpredictable one-pot method is introduced to synthesize NH2-MIL-53 assisted by high-gravity in a greener media for the first time. Then, porphyrins were deployed to adorn the surface of MOF to increase the sensitivity of the prepared nanocomposite to the genetic materials and in-situ cellular protein structures. The hydrogen bond formation between genetic domains and the porphyrin' nitrogen as well as the surface hydroxyl groups is equally probable and could be considered a milestone in chemical physics and physical chemistry for biomedical applications. In this context, the role of incorporating different forms of porphyrins, their relationship with the final surface morphology, and their drug/gene loading efficiency were investigated to provide a predictable pattern in regard to the previous works. The conceptual phenomenon was optimized to increase the interactions between the biomolecules and the substrate by reaching the limit of detection to 10 pM for the Anti-cas9 protein, 20 pM for the single-stranded DNA (ssDNA), below 10 pM for the single guide RNA (sgRNA) and also around 10 nM for recombinant SARS-CoV-2 spike antigen. Also, the MTT assay showed acceptable relative cell viability of more than 85% in most cases, even by increasing the dose of the prepared nanostructures.
- MeSH
- buňky Hep G2 MeSH
- buňky PC12 MeSH
- COVID-19 diagnóza MeSH
- CRISPR-Cas systémy MeSH
- dusík chemie MeSH
- guide RNA, Kinetoplastida MeSH
- HEK293 buňky MeSH
- HeLa buňky MeSH
- jednovláknová DNA MeSH
- krysa rodu rattus MeSH
- lidé MeSH
- limita detekce MeSH
- nanokompozity MeSH
- nanostruktury MeSH
- porézní koordinační polymery chemie MeSH
- poréznost MeSH
- porfyriny chemie MeSH
- povrchové vlastnosti MeSH
- RNA virová metabolismus MeSH
- SARS-CoV-2 MeSH
- senzitivita a specificita MeSH
- testování na COVID-19 MeSH
- vodíková vazba MeSH
- zvířata MeSH
- Check Tag
- krysa rodu rattus MeSH
- lidé MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
Typically, polymeric composites containing nanoparticles are realized by incorporating pre-made nanoparticles into a polymer matrix by using blending solvent or by the reduction of metal salt dispersed in the polymeric matrix. Generally, the production of pre-made Au NPs occurs in liquids with two-step processes: producing the gold nanoparticles first and then adding them to the liquid polymer. A reproducible method to synthetize Au nanoparticles (NPs) into polydimethylsiloxane (PDMS) without any external reducing or stabilizing agent is a challenge. In this paper, a single-step method is proposed to synthetize nanoparticles (NPs) and at the same time to realize reproducible porous and bulk composites using laser ablation in liquid. With this single-step process, the gold nanoparticles are therefore produced directly in the liquid polymer. The optical properties of the suspensions of AuNPs in distilled water and in the curing agent have been analyzed by the UV-VIS spectroscopy, employed in the transmission mode, and compared with those of the pure curing agent. The electrical dc conductivity of the porous PDMS/Au NPs nanocomposites has been evaluated by the I-V characteristics. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis have monitored the composition and morphology of the so-obtained composites and the size of the fabricated Au nanoparticles. Atomic force microscopy (AFM) has been used to determine the roughness of the bulk PDMS and its Au NP composites.
