INTRODUCTION: Staphylococcus capitis naturally colonizes the human skin but as an opportunistic pathogen, it can also cause biofilm-associated infections and bloodstream infections in newborns. Previously, we found that two strains from the subspecies S. capitis subsp. capitis produce yellow carotenoids despite the initial species description, reporting this subspecies as non-pigmented. In Staphylococcus aureus, the golden pigment staphyloxanthin is an important virulence factor, protecting cells against reactive oxygen species and modulating membrane fluidity. METHODS: In this study, we used two pigmented (DSM 111179 and DSM 113836) and two non-pigmented S. capitis subsp. capitis strains (DSM 20326T and DSM 31028) to identify the pigment, determine conditions under which pigment-production occurs and investigate whether pigmented strains show increased resistance to ROS and temperature stress. RESULTS: We found that the non-pigmented strains remained colorless regardless of the type of medium, whereas intensity of pigmentation in the two pigmented strains increased under low nutrient conditions and with longer incubation times. We were able to detect and identify staphyloxanthin and its derivates in the two pigmented strains but found that methanol cell extracts from all four strains showed ROS scavenging activity regardless of staphyloxanthin production. Increased survival to cold temperatures (-20°C) was detected in the two pigmented strains only after long-term storage compared to the non-pigmented strains. CONCLUSION: The identification of staphyloxanthin in S. capitis is of clinical relevance and could be used, in the same way as in S. aureus, as a possible target for anti-virulence drug design.
- Publikační typ
- časopisecké články MeSH
The search for the "Holy Grail" in clinical diagnostic microbiology-a reliable, accurate, low-cost, real-time, easy-to-use method-has brought up several methods with the potential to meet these criteria. One is Raman spectroscopy, an optical, nondestructive method based on the inelastic scattering of monochromatic light. The current study focuses on the possible use of Raman spectroscopy for identifying microbes causing severe, often life-threatening bloodstream infections. We included 305 microbial strains of 28 species acting as causative agents of bloodstream infections. Raman spectroscopy identified the strains from grown colonies, with 2.8% and 7% incorrectly identified strains using the support vector machine algorithm based on centered and uncentred principal-component analyses, respectively. We combined Raman spectroscopy with optical tweezers to speed up the process and captured and analyzed microbes directly from spiked human serum. The pilot study suggests that it is possible to capture individual microbial cells from human serum and characterize them by Raman spectroscopy with notable differences among different species. IMPORTANCE Bloodstream infections are among the most common causes of hospitalizations and are often life-threatening. To establish an effective therapy for a patient, the timely identification of the causative agent and characterization of its antimicrobial susceptibility and resistance profiles are essential. Therefore, our multidisciplinary team of microbiologists and physicists presents a method that reliably, rapidly, and inexpensively identifies pathogens causing bloodstream infections-Raman spectroscopy. We believe that it might become a valuable diagnostic tool in the future. Combined with optical trapping, it offers a new approach where the microorganisms are individually trapped in a noncontact way by optical tweezers and investigated by Raman spectroscopy directly in a liquid sample. Together with the automatic processing of measured Raman spectra and comparison with a database of microorganisms, it makes the whole identification process almost real time.
- MeSH
- algoritmy MeSH
- lidé MeSH
- optická pinzeta MeSH
- pilotní projekty MeSH
- Ramanova spektroskopie * metody MeSH
- sepse * MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
Efficient separation and sensitive identification of pathogenic bacterial strains is essential for a prosperous modern society, with direct applications in medical diagnostics, drug discovery, biodefense, and food safety. We developed a fast and reliable method for antibody-based selective immobilization of bacteria from suspension onto a gold-plated glass surface, followed by detection using strain-specific antibodies linked to gold nanoparticles decorated with a reporter molecule. The reporter molecules are subsequently detected by surface-enhanced Raman spectroscopy (SERS). Such a multi-functionalized nanoparticle is called a SERS-tag. The presented procedure uses widely accessible and cheap materials for manufacturing and functionalization of the nanoparticles and the immobilization surfaces. Here, we exemplify the use of the produced SERS-tags for sensitive single-cell detection of opportunistic pathogen Escherichia coli, and we demonstrate the selectivity of our method using two other bacterial strains, Staphylococcus aureus and Serratia marcescens, as negative controls. We believe that the described approach has a potential to inspire the development of novel medical diagnostic tools for rapid identification of bacterial pathogens.
Rapid and accurate identification of pathogens causing infections is one of the biggest challenges in medicine. Timely identification of causative agents and their antimicrobial resistance profile can significantly improve the management of infection, lower costs for healthcare, mitigate ever-growing antimicrobial resistance and in many cases, save lives. Raman spectroscopy was shown to be a useful-quick, non-invasive, and non-destructive -tool for identifying microbes from solid and liquid media. Modifications of Raman spectroscopy and/or pretreatment of samples allow single-cell analyses and identification of microbes from various samples. It was shown that those non-culture-based approaches could also detect antimicrobial resistance. Moreover, recent studies suggest that a combination of Raman spectroscopy with optical tweezers has the potential to identify microbes directly from human body fluids. This review aims to summarize recent advances in non-culture-based approaches of identification of microbes and their virulence factors, including antimicrobial resistance, using methods based on Raman spectroscopy in the context of possible use in the future point-of-care diagnostic process.
- MeSH
- analýza jednotlivých buněk MeSH
- antiinfekční látky * MeSH
- faktory virulence MeSH
- lidé MeSH
- Ramanova spektroskopie * metody MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- přehledy MeSH
Aim: Finding rapid, reliable diagnostic methods is a big challenge in clinical microbiology. Raman spectroscopy is an optical method used for multiple applications in scientific fields including microbiology. This work reports its potential in identifying biofilm positive strains of Candida parapsilosis and Staphylococcus epidermidis. Materials & methods: We tested 54 S. epidermidis strains (23 biofilm positive, 31 negative) and 51 C. parapsilosis strains (27 biofilm positive, 24 negative) from colonies on Mueller-Hinton agar plates, using Raman spectroscopy. Results: The accuracy was 98.9% for C. parapsilosis and 96.1% for S. epidermidis. Conclusion: The method showed great potential for identifying biofilm positive bacterial and yeast strains. We suggest that Raman spectroscopy might become a useful aid in clinical diagnostics.
Due to the additional particle coalescence in the coating, changes in the dissolution profile occur over time in the formulations coated by aqueous ethylcellulose latex. Dry thermal treatment (DT) of the coating can be used as a prevention of this process. Alternatively, it is advisable to take advantage of the synergistic effect of high humidity during wet treatment (WT), which substantially accelerates the film formation. This can be a problem for time-controlled systems, which are based on the coating rupture due to the penetration of water into the core causing the increase in the system volume. This process can begin already during the WT, which may affect the coating adversely. The submitted work was focused on the stability testing of two pellet core compositions: pellets containing swelling superdisintegrant sodium carboxymethyl starch (CMS) and pellets containing osmotically active polyethylene glycol (PEG). Another objective was to identify the treatment/storage condition effects on the pellet dissolution profiles. These pellets are intended to prevent hypoglycemia for patients with diabetes mellitus and therefore, besides the excipients, pellet cores contain 75% or 80% of glucose. The pellet coating is formed by ethylcellulose-based latex, which provides the required lag time (120-360 min). The sample stability was evaluated depending on the pellet core composition (PEG, CMS) for two types of final pellet coating treatment (DT or WT). Scanning electron microscopy and Raman microspectroscopy revealed the penetration of glucose and polyethylene glycol from the core to the PEG pellet surface after WT. For the CMS sample, significant pellet swelling after WT (under the conditions of elevated humidity) was statistically confirmed by the means of stereomicroscopic data evaluation. Therefore, the acceleration of dissolution rate during the stress tests is caused by the soluble substance penetration through the coating in the case of PEG pellets or by dosage form volume increase in the case of CMS pellets. The observed mechanisms can be generally anticipated during the stability testing of the ethylcellulose coated dosage forms. The aforementioned processes do not occur after DT and the pellets are stable in the environment without increased humidity.
- MeSH
- celulosa analogy a deriváty chemie MeSH
- chemie farmaceutická MeSH
- glukosa chemie farmakologie MeSH
- hypoglykemie prevence a kontrola MeSH
- léky implantované chemie MeSH
- léky s prodlouženým účinkem MeSH
- polyethylenglykoly chemie MeSH
- pomocné látky chemie MeSH
- povrchové vlastnosti MeSH
- příprava léků metody MeSH
- rozpustnost MeSH
- škrob analogy a deriváty chemie MeSH
- stabilita léku MeSH
- uvolňování léčiv MeSH
- velikost částic MeSH
- vysoká teplota MeSH
- Publikační typ
- časopisecké články MeSH
Polyhydroxyalkanoates (PHA) are storage polymers accumulated by numerous prokaryotes in form of intracellular granules. Native PHA granules are formed by amorphous polymer which reveals considerably higher elasticity and flexibility as compared to crystalline pure PHA polymers. The fact that bacteria store PHA in amorphous state has great biological consequences. It is not clear which mechanisms protect amorphous polymer in native granules from transition into thermodynamically favorable crystalline state. Here, we demonstrate that exposition of bacterial cells to particular stressors induces granules aggregation, which is the first but not sufficient condition for PHA crystallization. Crystallization of the polymer occurs only when the stressed bacterial cells are subsequently dried. The fact that both granules aggregation and cell drying must occur to induce crystallization of PHA indicates that both previously suggested hypotheses about mechanisms of stabilization of amorphous state of native PHA are valid and, in fact, both effects participate synergistically. It seems that the amorphous state of the polymer is stabilized kinetically by the low rate of crystallization in limited volume in small PHA granules and, moreover, water present in PHA granules seems to function as plasticizer protecting the polymer from crystallization, as confirmed experimentally for the first time by the present work.
The biofilm-forming microbial species Candida parapsilosis and Staphylococcus epidermidis have been recently linked to serious infections associated with implanted medical devices. We studied microbial biofilms by high resolution scanning electron microscopy (SEM), which allowed us to visualize the biofilm structure, including the distribution of cells inside the extracellular matrix and the areas of surface adhesion. We compared classical SEM (chemically fixed samples) with cryogenic SEM, which employs physical sample preparation based on plunging the sample into various liquid cryogens, as well as high-pressure freezing (HPF). For imaging the biofilm interior, we applied the freeze-fracture technique. In this study, we show that the different means of sample preparation have a fundamental influence on the observed biofilm structure. We complemented the SEM observations with Raman spectroscopic analysis, which allowed us to assess the time-dependent chemical composition changes of the biofilm in vivo. We identified the individual spectral peaks of the biomolecules present in the biofilm and we employed principal component analysis (PCA) to follow the temporal development of the chemical composition.
- MeSH
- bakteriální infekce diagnóza mikrobiologie MeSH
- biofilmy růst a vývoj MeSH
- Candida parapsilosis izolace a purifikace patogenita ultrastruktura MeSH
- lidé MeSH
- mikroskopie elektronová rastrovací MeSH
- Ramanova spektroskopie MeSH
- Staphylococcus epidermidis izolace a purifikace patogenita ultrastruktura MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
Analyzing the cells in various body fluids can greatly deepen the understanding of the mechanisms governing the cellular physiology. Due to the variability of physiological and metabolic states, it is important to be able to perform such studies on individual cells. Therefore, we developed an optofluidic system in which we precisely manipulated and monitored individual cells of Escherichia coli. We tested optical micromanipulation in a microfluidic chamber chip by transferring individual bacteria into the chambers. We then subjected the cells in the chambers to antibiotic cefotaxime and we observed the changes by using time-lapse microscopy. Separately, we used laser tweezers Raman spectroscopy (LTRS) in a different micro-chamber chip to manipulate and analyze individual cefotaxime-treated E. coli cells. Additionally, we performed conventional Raman micro-spectroscopic measurements of E. coli cells in a micro-chamber. We found observable changes in the cellular morphology (cell elongation) and in Raman spectra, which were consistent with other recently published observations. The principal component analysis (PCA) of Raman data distinguished between the cefotaxime treated cells and control. We tested the capabilities of the optofluidic system and found it to be a reliable and versatile solution for this class of microbiological experiments.
Numerous prokaryotes accumulate polyhydroxyalkanoates (PHA) in the form of intracellular granules. The primary function of PHA is the storage of carbon and energy. Nevertheless, there are numerous reports that the presence of PHA granules in microbial cells enhances their stress resistance and fitness when exposed to various stress factors. In this work, we studied the protective mechanism of PHA granules against UV irradiation employing Cupriavidus necator as a model bacterial strain. The PHA-accumulating wild type strain showed substantially higher UV radiation resistance than the PHA non-accumulating mutant. Furthermore, the differences in UV-Vis radiation interactions with both cell types were studied using various spectroscopic approaches (turbidimetry, absorption spectroscopy, and nephelometry). Our results clearly demonstrate that intracellular PHA granules efficiently scatter UV radiation, which provides a substantial UV-protective effect for bacterial cells and, moreover, decreases the intracellular level of reactive oxygen species in UV-challenged cells. The protective properties of the PHA granules are enhanced by the fact that granules specifically bind to DNA, which in turn provides shield-like protection of DNA as the most UV-sensitive molecule. To conclude, the UV-protective action of PHA granules adds considerable value to their primary storage function, which can be beneficial in numerous environments.
