- MeSH
- antibiotická rezistence * účinky léků MeSH
- bakteriální infekce farmakoterapie MeSH
- bakteriofágy izolace a purifikace klasifikace růst a vývoj MeSH
- fágová terapie * dějiny metody MeSH
- lidé MeSH
- profágy patogenita MeSH
- průmyslová mikrobiologie trendy MeSH
- zvířata MeSH
- Check Tag
- lidé MeSH
- zvířata MeSH
Production of amylases by fungi under solid-state fermentation is considered the best methodology for commercial scaling that addresses the ever-escalating needs of the worldwide enzyme market. Here response surface methodology (RSM) was used for the optimization of process variables for α-amylase enzyme production from Trichoderma virens using watermelon rinds (WMR) under solid-state fermentation (SSF). The statistical model included four variables, each detected at two levels, followed by model development with partial purification and characterization of α-amylase. The partially purified α-amylase was characterized with regard to optimum pH, temperature, kinetic constant, and substrate specificity. The results indicated that both pH and moisture content had a significant effect (P < 0.05) on α-amylase production (880 U/g) under optimized process conditions at a 3-day incubation time, moisture content of 50%, 30 °C, and pH 6.98. Statistical optimization using RSM showed R2 values of 0.9934, demonstrating the validity of the model. Five α-amylases were separated by using DEAE-Sepharose and characterized with a wide range of optimized pH values (pH 4.5-9.0), temperature optima (40-60 °C), low Km values (2.27-3.3 mg/mL), and high substrate specificity toward large substrates. In conclusion, this study presents an efficient and green approach for utilization of agro-waste for production of the valuable α-amylase enzyme using RSM under SSF. RSM was particularly beneficial for the optimization and analysis of the effective process parameters.
Marine microorganisms represent virtually unlimited sources of novel biological compounds and can survive extreme conditions. Cellulases, a group of enzymes that are able to degrade cellulosic materials, are in high demand in various industrial and biotechnological applications, such as in the medical and pharmaceutical industries, food, fuel, agriculture, and single-cell protein, and as probiotics in aquaculture. The cellulosic biopolymer is a renewable resource and is a linearly arranged polysaccharide of glucose, with repeating units of disaccharide connected via β-1,4-glycosidic bonds, which are broken down by cellulase. A great deal of biodiversity resides in the ocean, and marine systems produce a wide range of distinct, new bioactive compounds that remain available but dormant for many years. The marine environment is filled with biomass from known and unknown vertebrates and invertebrate microorganisms, with much potential for use in medicine and biotechnology. Hence, complex polysaccharides derived from marine sources are a rich resource of microorganisms equipped with enzymes for polysaccharides degradation. Marine cellulases' extracts from the isolates are tested for their functional role in degrading seaweed and modifying wastes to low molecular fragments. They purify and renew environments by eliminating possible feedstocks of pollution. This review aims to examine the various types of marine cellulase producers and assess the ability of these microorganisms to produce these enzymes and their subsequent biotechnological applications.
Clostridium diolis DSM 15410 is a type strain of solventogenic clostridium capable of conducting isopropanol-butanol-ethanol fermentation. By studying its growth on different carbohydrates, we verified its ability to utilize glycerol and produce 1,3-propanediol and discovered its ability to produced isopropanol. Complete genome sequencing showed that its genome is a single circular chromosome and belongs to the cluster I (sensu scricto) of the genus Clostridium. By cultivation analysis we highlighted its specific behavior in comparison to two selected closely related strains. Despite the fact that several CRISPR loci were found, 16 putative prophages showed the ability to receive foreign DNA. Thus, the strain has the necessary features for future engineering of its 1,3-propanediol biosynthetic pathway and for the possible industrial utilization in the production of biofuels.
Myxobacteria belong to a group of bacteria that are known for their well-developed communication system and synchronized or coordinated movement. This typical behavior of myxobacteria is mediated through secondary metabolites. They are capable of producing secondary metabolites belonging to several chemical classes with unique and wide spectrum of bioactivities. It is predominantly significant that myxobacteria specialize in mechanisms of action that are very rare with other producers. Most of the metabolites have been explored for their medical and pharmaceutical values while a lot of them are still unexplored. This review is an attempt to understand the role of potential metabolites produced by myxobacteria in different applications. Different myxobacterial metabolites have demonstrated antibacterial, antifungal, and antiviral properties along with cytotoxic activity against various cell lines. Beside their metabolites, these myxobacteria have also been discussed for better exploitation and implementation in different industrial sectors.
An increase in temperature can have a profound effect on the cell cycle and cell division in green algae, whereas growth and the synthesis of energy storage compounds are less influenced. In Chlamydomonas reinhardtii, laboratory experiments have shown that exposure to a supraoptimal temperature (39 °C) causes a complete block of nuclear and cellular division accompanied by an increased accumulation of starch. In this work we explore the potential of supraoptimal temperature as a method to promote starch production in C. reinhardtii in a pilot-scale photobioreactor. The method was successfully applied and resulted in an almost 3-fold increase in the starch content of C. reinhardtii dry matter. Moreover, a maximum starch content at the supraoptimal temperature was reached within 1-2 days, compared with 5 days for the control culture at the optimal temperature (30 °C). Therefore, supraoptimal temperature treatment promotes rapid starch accumulation and suggests a viable alternative to other starch-inducing methods, such as nutrient depletion. Nevertheless, technical challenges, such as bioreactor design and light availability within the culture, still need to be dealt with.
- MeSH
- biomasa * MeSH
- bioreaktory MeSH
- buněčný cyklus MeSH
- Chlamydomonas reinhardtii metabolismus MeSH
- fotobioreaktory * MeSH
- kultivační média MeSH
- mikrořasy MeSH
- průmyslová mikrobiologie metody MeSH
- škrob metabolismus MeSH
- světlo MeSH
- teplota MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
Fructosyltransferase (FTase) catalyzes the transfer of a fructosyl group to a sucrose molecule or a fructooligosaccharide (FOS) when a FOS with a longer chain is formed. Production of FTase by two Aspergillus species and its mixture was exploited using solid-state fermentation (SSF) and employing agave sap as substrate. The maximum FTase activity (1.59 U/mL) by Aspergillus oryzae was obtained after 24 h, using a temperature of 30 °C, with an inoculum of 2 × 107 spores/mL. The nucleotide sequence coding for the fructosyltransferase showed 1494 bp and encodes for a protein of 498 amino acids. The hypothetical molecular tertiary structure of Aspergillus oryzae BM-DIA FTase showed the presence of structural domains, such as a five-bladed beta-propeller domain characteristic of GH (glycoside hydrolase) and C terminal, which forms a beta-sandwich module. This study contributes to the knowledge of stability, compatibility, and genetic expression of Aspergillus oryzae BM-DIA under SSF bioprocess conditions for industrial production of fructosyltransferase.
Ecosystems worldwide are exposed to pollutants connected to the industrial production of pharmaceuticals. The objective of this study was to study the composition and characteristics of the soil microbial communities that had been exposed to long-term selection pressure caused by the industrial production of penicillin G. Soil samples from four sites among the penicillin G production plant were analysed using 16S rRNA profiling via Illumina MiSeq platform and were compared with the control samples from four sites outside the plant. Total metagenomic DNA from the impacted soil was also used for the preparation of E. coli T1R-based fosmid library which was consequently qualitatively tested for the presence of penicillin G acylase (PGA)-encoding genes using the method of sequence homology. Analyses of alpha diversity revealed that the long-term antibiotic presence in the soil significantly increased the microbial diversity and richness in terms of Shannon diversity index (p = 0.002) and Chao estimates (p = 0.004). Principal component analysis showed that the two types of communities (on-site and control) could be separated at the phylum, class and genus level. The on-site soil was enriched in Betaproteobacteria, Deltaproteobacteria, Gemmatimonadetes, Acidobacteria and Planctomycetia, while a significant decrease in Actinobacteria was observed. Metagenomic fosmid library revealed high hit rates in identifying PGAs (14 different genes identified) and confirmed the biotechnological potential of soils impacted by anthropogenic activity. This study offers new insights into the changes in microbial communities of soils exposed to anthropogenic activity as well as indicates that those soils may represent a hotspot for biotechnologically interesting targets.
- MeSH
- antibakteriální látky biosyntéza MeSH
- Bacteria klasifikace genetika izolace a purifikace metabolismus MeSH
- biodiverzita MeSH
- DNA bakterií genetika MeSH
- Escherichia coli genetika MeSH
- fylogeneze MeSH
- látky znečišťující půdu MeSH
- metagenom MeSH
- metagenomika MeSH
- mikrobiota * genetika MeSH
- průmyslová mikrobiologie MeSH
- půda MeSH
- půdní mikrobiologie * MeSH
- RNA ribozomální 16S genetika MeSH
- Publikační typ
- časopisecké články MeSH
