A little is known about the link between the macromolecular architecture of dialdehyde polysaccharides (DAPs), their crosslinking capabilities, and the properties of resulting hydrogels. Here, DAPs based on cellulose, dextrin, dextran, and hyaluronate were compared as crosslinkers for poly(vinyl alcohol), PVA. The swelling, network parameters, viscoelastic properties, porosity, and cytotoxicity of PVA/DAP hydrogels were investigated concerning the crosslinker structure, molecular weight, aldehyde group density per macromolecule, and the size of spontaneously formed crosslinker nano-assemblies. Generally, crosslinkers based on linear polysaccharides (cellulose, hyaluronate) performed more reliably, while the presence of branching could be both beneficial (dextran) but also detrimental (dextrin) at lower crosslinker concentrations. For example, the hydrogel swelling differed by up to one-third (600 vs. 400%) and storage modulus even by up to one half (~7000 vs. ~3500 Pa) depending on crosslinker structure and properties. These differences were rationalized by variances in crosslinking modes derived based on obtained data.

• MeSH
• buňky NIH 3T3 MeSH
• hydrogely chemie   farmakologie   MeSH
• myši MeSH
• polysacharidy chemie   farmakologie   MeSH
• polyvinylalkohol chemie   farmakologie   MeSH
• reagencia zkříženě vázaná chemie   farmakologie   MeSH
• viabilita buněk účinky léků   MeSH
• zvířata MeSH
• Check Tag
• myši MeSH
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH
• srovnávací studie MeSH

Fabrication of adsorbents with excellent adsorption capacity, outstanding stability, easy separation ability, excellent recyclability and widely generality for organic dyes removal from wastewater remains challenging. Herein, three-dimensional polyaniline/poly(vinyl alcohol)/montmorillonite (PANI/PVAL/MMT) hybrid aerogels with easy separation performance and highly effective reusable adsorption on both anionic and cationic dyes were fabricated by a simple in-situ polymerization method. As-prepared hybrid aerogels were characterized via infrared and Raman spectra, scanning electron microscopy, energy dispersive spectra mapping, small and wide-angle X-ray scattering, thermogravimetric analysis, mercury intrusion porosimetry and elemental analysis. The results showed that MMT particles were successfully incorporated into aerogel matrix. Well-defined hierarchical structure, where PANI nanofibers are coated on the skeleton wall, can be observed for PANI/PVAL/MMT when the incorporation amount of MMT was around 11.1 wt%. The adsorption performance of as-prepared hybrid aerogels on both anionic and cationic dyes was systemically carried out at different solution pH, adsorbent dosage and initial dye concentration. The data analysis showed that the adsorption process for PVAL/PANI/MMT aerogel for Reactive Black 5, methyl orange and safranin followed Freundlich isotherm and the maximum experimental adsorption capacities were found to be 199, 251 and 57.0 mg g-1 at 25 °C, respectively. Mechanism studies indicated that the electrostatic interaction is the main driving force for the adsorption of dyes. The results demonstrated that the fabricated hybrid aerogel is an efficient adsorbent for the removal of both anionic and cationic organic dyes.

• Publikační typ
• časopisecké články MeSH

Fully and partially hydrolyzed poly(vinyl alcohol) (PVA) was modified with zinc sulphate in the concentration range from 0 to 9 wt% of recalculated zinc content using the solvent cast technique. The resulting polymeric films were characterized by optical microscopy, stress-strain analysis, differential scanning calorimetry and Fourier transform infrared spectroscopy (FT-IR-ATR). In addition, agar diffusion test and dilution and spread plate technique were used for determination of antibacterial properties of the films against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa and Klebsiella pneumoniae) bacterial strains. A mathematical model was applied on the measured data and parameters characterizing the antibacterial efficiency of the material were calculated and discussed. The results revealed that the PVA hydrolysis degree can play an important role in all studied properties, including antibacterial activity of the all PVA-based materials.

• MeSH
• antibakteriální látky chemie   farmakologie   MeSH
• diferenciální skenovací kalorimetrie MeSH
• Escherichia coli účinky léků   MeSH
• hydrolýza MeSH
• polymery chemie   farmakologie   MeSH
• polyvinylalkohol chemie   MeSH
• Pseudomonas aeruginosa účinky léků   MeSH
• síran zinečnatý chemie   MeSH
• spektroskopie infračervená s Fourierovou transformací MeSH
• Staphylococcus aureus účinky léků   MeSH
• teoretické modely MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

2,3-Dialdehyde cellulose (DAC) was used as an efficient and low-toxicity crosslinker to prepare thin PVA/DAC hydrogel films designed for topical applications such as drug-loaded patches, wound dressings or cosmetic products. An optimization of hydrogel properties was achieved by the variation of two factors - the amount of crosslinker and the weight-average molecular weight (Mw) of the source PVA. The role of each factor to network parameters, mechanical, rheological and surface properties, hydrogel porosity and transdermal absorption is discussed. The best results were obtained for hydrogel films prepared using 0.25 wt% of DAC and PVA with Mw = 130 kDa, which had a high porosity and drug-loading capacity (high water content), mechanical properties allowing easy handling, best adherence to the skin from all tested samples and improved transdermal drug-delivery. Hydrogel films are biocompatible, show no cytotoxicity and have no negative impact on cell growth and morphology in their presence. Furthermore, hydrogels do not support cell migration and attachment to their surface, which should ensure easy removal of hydrogel patches even from wounded or damaged skin after use.

• MeSH
• celulosa analogy a deriváty   MeSH
• hydrogely MeSH
• obvazy * MeSH
• polyvinylalkohol * MeSH
• Publikační typ
• časopisecké články MeSH

Electrospinning is a widely employed manufacturing platform for tissue engineering applications because it produces structures that closely mimic the extracellular matrix. Herein, we demonstrate the potential of poly(vinyl alcohol) (PVA) electrospun nanofibers as scaffolds for tissue engineering. Nanofibers were created by needleless direct current electrospinning from PVA with two different degrees of hydrolysis (DH), namely 98% and 99% and subsequently heat treated at 180 °C for up to 16 h to render them insoluble in aqueous environments without the use of toxic cross-linking agents. Despite the small differences in the PVA chemical structure, the changes in the material properties were substantial. The higher degree of hydrolysis resulted in non-woven supports with thinner fibres (285 ± 81 nm c.f. 399 ± 153 nm) that were mechanically stronger by 62% (±11%) and almost twice as more crystalline than those from 98% hydrolysed PVA. Although prolonged heat treatment (16 h) did not influence fibre morphology, it reduced the crystallinity and tensile strength for both sets of materials. All samples demonstrated a lack or very low degree of haemolysis (<5%), and there were no notable changes in their anticoagulant activity (≤3%). Thrombus formation, on the other hand, increased by 82% (±18%) for the 98% hydrolysed samples and by 71% (±10%) for the 99% hydrolysed samples, with heat treatment up to 16 h, as a direct consequence of the preservation of the fibrous morphology. 3T3 mouse fibroblasts showed the best proliferation on scaffolds that were thermally stabilised for 4 and 8 h. Overall these scaffolds show potential as 'greener' alternatives to other electrospun tissue engineering materials, especially in cases where they may be used as delivery vectors for heat tolerant additives.

• Publikační typ
• časopisecké články MeSH

Local chemotherapy using polymer drug delivery systems has the potential to treat some cancers, including intraocular retinoblastoma, which is difficult to treat with systemically delivered drugs. Well-designed carriers can provide the required drug concentration at the target site over a prolonged time, reduce the overall drug dose needed, and suppress severe side effects. Herein, nanofibrous carriers of the anticancer agent topotecan (TPT) with a multilayered structure composed of a TPT-loaded inner layer of poly(vinyl alcohol) (PVA) and outer covering layers of polyurethane (PUR) are proposed. Scanning electron microscopy showed homogeneous incorporation of TPT into the PVA nanofibers. HPLC-FLD proved the good loading efficiency of TPT (≥85%) with a content of the pharmacologically active lactone TPT of more than 97%. In vitro release experiments demonstrated that the PUR cover layers effectively reduced the initial burst release of hydrophilic TPT. In a 3-round experiment with human retinoblastoma cells (Y-79), TPT showed prolonged release from the sandwich-structured nanofibers compared with that from a PVA monolayer, with significantly enhanced cytotoxic effects as a result of an increase in the PUR layer thickness. The presented PUR-PVA/TPT-PUR nanofibers appear to be promising carriers of active TPT lactone that could be useful for local cancer therapy.

• Publikační typ
• časopisecké články MeSH

In the present work, nanofibre membranes composed of polyvinyl alcohol (PVA) and a natural gum karaya (GK) hydrocolloid were prepared using electrospinning. The electrospun membranes of PVA/GK were cross-linked with heat treatment and later methane plasma was used to obtain a hydrophobic membrane. The morphology, characterization and adsorption ability of P-NFM was assessed using scanning electron microscopy, UV-vis spectroscopy, ATR-FTIR techniques, water contact angle and ICP-MS analytical methods. The membrane was employed for the extraction of nanoparticles (Ag, Au, Pt, CuO and Fe3O4) from water. The nanoparticle extraction kinetic and adsorption isotherm perform the pseudo-second-order model and Langmuir isotherm model, respectively. The adsorption capacities of the membrane for the removal of NPs from water diverge in the order Pt>Au>Ag>CuO>Fe3O4. The high adsorption efficiency for the removal of NPs from water was compared with an untreated membrane. Physisorption, functional group interactions, complexation reactions between metal/metal oxide nanoparticles with various functional groups present in NFM and modified surface properties such as the balance of hydrophilicity/hydrophobicity, surface free energy, and the high surface area of the plasma treated membrane were possible mechanisms of NPs adsorption onto NFM. The regeneration and reusability were tested in five consecutive adsorption/desorption cycles.

• MeSH
• adsorpce MeSH
• guma karaya chemie   MeSH
• kinetika MeSH
• kovové nanočástice * MeSH
• látky znečišťující vodu izolace a purifikace   MeSH
• membrány umělé MeSH
• mikroskopie elektronová rastrovací MeSH
• nanovlákna chemie   ultrastruktura   MeSH
• polyvinylalkohol chemie   MeSH
• spektroskopie infračervená s Fourierovou transformací MeSH
• termodynamika MeSH
• Publikační typ
• časopisecké články MeSH
• hodnotící studie MeSH
• práce podpořená grantem MeSH

Scaffolds can be considered as one of the most promising treatments for bone tissue regeneration. Herein, blends of chitosan, poly(vinyl alcohol), and hydroxyapatite in different ratios were used to synthesize scaffolds via freeze-drying. Mechanical tests, FTIR, swelling and solubility degree, DSC, morphology, and cell viability were used as characterization techniques. Statistical significance of the experiments was determined using a two-way analysis of variance (ANOVA) with p < 0.05. Crosslinked and plasticized scaffolds absorbed five times more water than non-crosslinked and plasticized ones, which is an indicator of better hydrophilic features, as well as adequate resistance to water without detriment of the swelling potential. Indeed, the tested mechanical properties were notably higher for samples which were undergone to crosslinking and plasticized process. The presence of chitosan is determinant in pore formation and distribution which is an imperative for cell communication. Uniform pore size with diameters ranging from 142 to 519 µm were obtained, a range that has been described as optimal for bone tissue regeneration. Moreover, cytotoxicity was considered as negligible in the tested conditions, and viability indicates that the material might have potential as a bone regeneration system.

• MeSH
• biokompatibilní materiály chemie   terapeutické užití   MeSH
• chitosan chemická syntéza   chemie   terapeutické užití   MeSH
• hydroxyapatit chemická syntéza   chemie   terapeutické užití   MeSH
• kosti a kostní tkáň chemie   MeSH
• lidé MeSH
• osteoblasty účinky léků   MeSH
• polyvinylalkohol chemická syntéza   chemie   terapeutické užití   MeSH
• proliferace buněk účinky léků   MeSH
• regenerace kostí účinky léků   MeSH
• tkáňové inženýrství * MeSH
• tkáňové podpůrné struktury chemie   MeSH
• vývoj kostí účinky léků   MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• časopisecké články MeSH

The aim of this study was to fabricate novel microparticles (MPs) for efficient and long-term delivery of amikacin (AMI). The emulsification method proposed for encapsulating AMI employed low-molecular-weight poly(lactic acid) (PLA) and poly(lactic acid-co-polyethylene glycol) (PLA-PEG), both supplemented with poly(vinyl alcohol) (PVA). The diameters of the particles obtained were determined as less than 30 μm. Based on an in-vitro release study, it was proven that the MPs (both PLA/PVA- and PLA-PEG/PVA-based) demonstrated long-term AMI release (2 months), the kinetics of which adhered to the Korsmeyer-Peppas model. The loading efficiencies of AMI in the study were determined at the followings levels: 36.5 ± 1.5 μg/mg for the PLA-based MPs and 106 ± 32 μg/mg for the PLA-PEG-based MPs. These values were relatively high and draw parallels with studies published on the encapsulation of aminoglycosides. The MPs provided antimicrobial action against the Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae bacterial strains. The materials were also comprehensively characterized by the following methods: differential scanning calorimetry; gel permeation chromatography; scanning electron microscopy; Fourier transform infrared spectroscopy-attenuated total reflectance; energy-dispersive X-ray fluorescence; and Brunauer-Emmett-Teller surface area analysis. The findings of this study contribute toward discerning new means for conducting targeted therapy with polar, broad spectrum antibiotics.

• MeSH
• amikacin aplikace a dávkování   chemie   MeSH
• antibakteriální látky aplikace a dávkování   chemie   MeSH
• Escherichia coli účinky léků   MeSH
• Klebsiella pneumoniae účinky léků   MeSH
• laktáty chemie   MeSH
• mikrobiální testy citlivosti MeSH
• molekulová hmotnost MeSH
• nosiče léků chemie   MeSH
• polyestery chemie   MeSH
• polyethylenglykoly chemie   MeSH
• polyvinylalkohol chemie   MeSH
• příprava léků metody   MeSH
• Pseudomonas aeruginosa účinky léků   MeSH
• rozpustnost MeSH
• Staphylococcus aureus účinky léků   MeSH
• tobolky MeSH
• uvolňování léčiv MeSH
• velikost částic MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

This work is focused on preparation of novel porous type of core-shell-structured microparticles based on polylactide (shell) and poly(vinyl alcohol) cross-linked with glutaric acid (GA) (core) prepared by water-in-oil-in-water solvent evaporation technique. The microparticle systems were used as delivery systems for immobilisation of model antibacterial agent - nisin. The effect of cross-linking and the initial amount of nisin on their morphology was investigated using scanning electron microscopy, BET analysis, zeta potential measurement and Fourier transform infra-red spectroscopy. Encapsulation efficiency and release profile of nisin from the microparticles were studied by high performance liquid chromatography. Antibacterial activity of the prepared systems was tested by dilution and spread plate technique. Results showed the microparticles in the size range of 9-16 μm in diameter with spherical multi-hollow core-shell structure. The presence of cross-linking agent GA influences the release profile of the peptide and has synergistic effect on Listeria monocytogenes growth reduction.

• MeSH
• antibakteriální látky aplikace a dávkování   MeSH
• glutaráty chemie   MeSH
• Listeria monocytogenes účinky léků   MeSH
• mikroskopie elektronová rastrovací MeSH
• nisin aplikace a dávkování   MeSH
• nosiče léků chemie   MeSH
• polyestery chemie   MeSH
• polyvinylalkohol chemie   MeSH
• poréznost MeSH
• velikost částic MeSH
• Publikační typ
• časopisecké články MeSH