The polymeric cytisine-enriched fibers based on poly(3-hydroxybutyrate) were obtained using electrospinning method. The biocompatibility study, advanced thermal analysis and release of cytisine from the poly(3-hydroxybutyrate) fibers were carried out. The nanofibers' morphology was evaluated by scanning electron microscopy. The formation and description of phases during the thermal processes of fibers by the advanced thermal analysis were examined. The new quantitative thermal analysis of polymeric fibers with cytisine phases based on vibrational, solid and liquid heat capacities was presented. The apparent heat capacity of fibers was measured using the standard differential scanning calorimetry. The quantitative analysis allowed for the study of the glass transition and melting/crystallization process. The mobile amorphous fraction, degree of crystallinity and rigid amorphous fraction were determined depending on the thermal history of semicrystalline polymeric fibers. Furthermore, the cytisine dissolution behaviour was studied. It was observed that the kinetic of the release from polymeric nanofiber is delayed than for the marketed product. The immunosafety of the tested polymeric nanofibers with cytisine was confirmed by the Food and Drug Agency Guidance as well as the European Medicines Agency. The polymeric matrix with cytisine seems to be a promising candidate for the prolonged release formulation.
Nanofibrous materials produced from natural polymers have wide range of potential uses in regenerative medicine. This paper focuses on preparation of nanofibrous layers produced from intentionally hydrophobized derivatives of hyaluronan, which is known for its ability to promote wound healing. This structural modification of hyaluronan expands the range of potential uses of this promising material, which is otherwise limited due to the hydrophilic nature of hyaluronic acid. The aim of this research was preparation of nanofibrous material that would retain its fibrous structure and dimensional stability even after getting into contact with an aqueous medium, which is impossible to achieve with layers composed solely of native hyaluronan. As a result, such material would be able to retain its breathability and good mechanical properties when both dry and wet. Furthermore, all prepared materials were proved non-toxic for cells. This self-supporting nanofibrous matrix can be used as a scaffold, or porous wound dressing.
- Publikační typ
- časopisecké články MeSH
Hydrophobic fibrous slippery liquid-infused porous surfaces (SLIPS) were fabricated by electrospinning polydimethylsiloxane (PDMS) and polystyrene (PS) as a carrier polymer on plasma-treated polyethylene (PE) and polyurethane (PU) substrates. Subsequent infusion of blackseed oil (BSO) into the porous structures was applied for the preparation of the SLIPS. SLIPS with infused lubricants can act as a repellency layer and play an important role in the prevention of biofilm formation. The effect of polymer solutions used in the electrospinning process was investigated to obtain well-defined hydrophobic fibrous structures. The surface properties were analyzed through various optical, macroscopic and spectroscopic techniques. A comprehensive investigation of the surface chemistry, surface morphology/topography, and mechanical properties was carried out on selected samples at optimized conditions. The electrospun fibers prepared using a mixture of PDMS/PS in the ratio of 1:1:10 (g/g/mL) using tetrahydrofuran (THF) solvent showed the best results in terms of fiber uniformity. The subsequent infusion of BSO into the fabricated PDMS/PS fiber mats exhibited slippery behavior regarding water droplets. Moreover, prepared SLIPS exhibited antibacterial activity against Staphylococcus aureus and Escherichia coli bacterium strains.
- MeSH
- dimethylpolysiloxany * MeSH
- Escherichia coli MeSH
- polymery chemie MeSH
- polystyreny * MeSH
- poréznost MeSH
- Publikační typ
- časopisecké články MeSH
Zein is renewable plant protein with valuable film-forming properties that can be used as a packaging material. It is known that the addition of natural cross-linkers can enhance a film's tensile properties. In this study, we aimed to prepare antimicrobial zein-based films enriched with monolaurin, eugenol, oregano, and thyme essential oil. Films were prepared using the solvent casting technique from ethanol solution. Their physicochemical properties were investigated using structural, morphological, and thermal techniques. Polar and dispersive components were analyzed using two models to evaluate the effects on the surface free energy values. The antimicrobial activity was proven using a disk diffusion method and the suppression of bacterial growth was confirmed via a growth kinetics study with the Gompertz function. The films' morphological characteristics led to systems with uniform distribution of essential oils or eugenol droplets combined with a flat-plated structure of monolaurin. A unique combination of polyphenolic eugenol and amphiphilic monoglyceride provided highly stretchable films with enhanced barrier properties and efficiency against Gram-positive and Gram-negative bacteria, yeasts, and molds. The prepared zein-based films with tunable surface properties represent an alternative to non-renewable resources with a potential application as active packaging materials.
- MeSH
- antibakteriální látky farmakologie MeSH
- antifungální látky farmakologie MeSH
- biomechanika účinky léků MeSH
- diferenciální skenovací kalorimetrie MeSH
- Escherichia coli účinky léků MeSH
- eugenol farmakologie MeSH
- laurany farmakologie MeSH
- mikroskopie atomárních sil MeSH
- monoglyceridy farmakologie MeSH
- obaly potravin * MeSH
- oleje prchavé farmakologie MeSH
- pára MeSH
- permeabilita MeSH
- povrchové vlastnosti MeSH
- smáčivost MeSH
- spektroskopie infračervená s Fourierovou transformací MeSH
- Staphylococcus aureus účinky léků MeSH
- zein farmakologie MeSH
- Publikační typ
- časopisecké články MeSH
Fused deposition modelling (FDM) is a process of additive manufacturing allowing creating of highly precise complex three-dimensional objects for a large range of applications. The principle of FDM is an extrusion of the molten filament and gradual deposition of layers and their solidification. Potential applications in pharmaceutical and medical fields require the development of biodegradable and biocompatible thermoplastics for the processing of filaments. In this work, the potential of production of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) filaments for FDM was investigated in respect to its thermal stability. Copolymer P(3HB-co-4HB) was biosynthesised by Cupriavidus malaysiensis. Rheological and mechanical properties of the copolymer were modified by the addition of plasticizers or blending with poly(lactic acid). Thermal stability of mixtures was studied employing thermogravimetric analysis and rheological analyses by monitoring the time-dependent changes in the complex viscosity of melt samples. The plasticization of P(3HB-co-4HB) slightly hindered its thermal degradation but the best stabilization effect was found in case of the copolymer blended with poly(lactic acid). Overall, rheological, thermal and mechanical properties demonstrated that the plasticized P(3HB-co-4HB) is a potential candidate of biodegradable polymer for FDM processes.
Polymeric biomaterials are widely used in medical applications owing to their low cost, processability and sufficient toughness. Surface modification by creating a thin film of bioactive agents is promising technique to enhance cellular interactions, regulate the protein adsorption and/or avoid bacterial infections. Polyethylene is one of the most used polymeric biomaterial but its hydrophobic nature impedes its further chemical modifications. Plasma treatment is unique method to increase its hydrophilicity by incorporating hydrophilic oxidative functional groups and tailoring the surface by physical etching. Furthermore, grafting of polymer brushes of amine group containing monomers onto the functionalized surface lead to strongly immobilized bioactive agents at the final step. Chondroitin sulphate is natural polysaccharide mainly found in connective cartilage tissue which used as a bioactive agent to immobilize onto polyethylene surface by multistep method in this study.
- MeSH
- chondroitin sulfáty chemie farmakologie MeSH
- fibroblasty cytologie účinky léků MeSH
- fotoelektronová spektroskopie MeSH
- mikroskopie atomárních sil MeSH
- myši MeSH
- proliferace buněk účinky léků MeSH
- skot MeSH
- smáčivost MeSH
- spektroskopie infračervená s Fourierovou transformací MeSH
- tvar buňky účinky léků MeSH
- voda chemie MeSH
- zvířata MeSH
- Check Tag
- myši MeSH
- skot MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
Continuously increasing application of silver nanoparticles (AgNPs) requires information on their safety and performance under biological conditions. Assessment of AgNPs in biological systems is also related to availability of robust toxicological methods for evaluation of toxic potential of AgNPs and information on their physicochemical state. Silver nanoparticles were subjected to action of simulated saliva, gastric and intestinal fluids, appropriately supplemented with digestive enzymes pepsin or pancreatin. The behaviour of AgNPs was determined using dynamic light scattering and transmission electron microscopy, and their toxicity as well as capability to induce inflammatory reactions were assessed using reconstructed human tissue models (EpiOral, EpiGingival, EpiIntestinal). The study revealed that during exposure to the fluids, AgNPs size and morphology changed and depended on composition and pH of the respective fluid. If present, the change in terms of growth of AgNPs size occurred immediately after contact of AgNPs with the respective fluid and continued with prolonged time of contact. A pilot study on reconstituted human tissue models revealed low toxicity and inflammatory effects of AgNPs and confirmed the suitability of 3-D models for toxicological studies including bioavailability.
- MeSH
- kovové nanočástice chemie MeSH
- lidé MeSH
- pilotní projekty MeSH
- sliny chemie MeSH
- stříbro * MeSH
- techniky tkáňových kultur MeSH
- velikost částic MeSH
- žaludeční šťáva chemie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
Polyaniline shows great potential and promises wide application in the biomedical field thanks to its intrinsic conductivity and material properties, which closely resemble natural tissues. Surface properties are crucial, as these predetermine any interaction with biological fluids, proteins and cells. An advantage of polyaniline is the simple modification of its surface, e.g., by using various dopant acids. An investigation was made into the adhesion, proliferation and migration of mouse embryonic fibroblasts on pristine polyaniline films and films doped with sulfamic and phosphotungstic acids. In addition, polyaniline films supplemented with poly (2-acrylamido-2-methyl-1-propanesulfonic) acid at various ratios were tested. Results showed that the NIH/3T3 cell line was able to adhere, proliferate and migrate on the pristine polyaniline films as well as those films doped with sulfamic and phosphotungstic acids; thus, utilization of said forms in biomedicine appears promising. Nevertheless, incorporating poly (2-acrylamido-2-methyl-1-propanesulfonic) acid altered the surface properties of the polyaniline films and significantly affected cell behavior. In order to reveal the crucial factor influencing the surface/cell interaction, cell behavior is discussed in the context of the surface energy of individual samples. It was clearly demonstrated that the lesser the difference between the surface energy of the sample and cell, the more cyto-compatible the surface is.
- MeSH
- aniliny chemie farmakologie MeSH
- biokompatibilní materiály chemie farmakologie MeSH
- buněčná adheze účinky léků MeSH
- buňky NIH 3T3 MeSH
- myši MeSH
- pohyb buněk účinky léků MeSH
- povrchové vlastnosti MeSH
- proliferace buněk účinky léků MeSH
- zvířata MeSH
- Check Tag
- myši MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
The aim of this study was to develop the potential tissue engineering applications of d-glucosamine (GlcN) immobilized onto the surface of a biodegradable matrix in order to induce a desired biological effect at biointerfaces. Thus, for sample preparation we used a novel multistep physicochemical approach. In the first step the poly(lactic acid) (PLA) films were exposed to a low pressure plasma in air atmosphere, followed by radical graft copolymerization with acrylic acid to yield a carboxyl-functionalized spacer layer on the PLA surface. The carboxyl groups were then coupled to GlcN molecules via the carbodiimide chemistry. The developed surfaces were characterized by X-ray Photoelectron Spectroscopy (XPS), Contact angle measurements and Atomic Force Microscopy (AFM). A preliminary study on the proliferation of fibroblasts on the developed surfaces was performed using the NIH/3T3 cell line.
- MeSH
- biokompatibilní materiály chemie MeSH
- fotoelektronová spektroskopie MeSH
- glukosamin chemie MeSH
- mikroskopie atomárních sil MeSH
- polyestery chemie MeSH
- povrchové vlastnosti MeSH
- proliferace buněk MeSH
- regenerace * MeSH
- smáčivost MeSH
- tkáňové inženýrství * MeSH
- Publikační typ
- časopisecké články MeSH
