An efficient sample preparation based on pipette tip microextraction that can be used for the analysis of retinol in human serum has been developed. Altogether, nine commercial pipette tips were compared based on recovery, sample volume, use of organic solvent, handling difficulty, duration of the preparation process, price, and greenness of the method. Retinol acetate was used as the internal standard. The extraction efficiency for both compounds was evaluated to optimize and select the best pipette tip for sample preparation, which was the WAX-S XTR pipette tip containing an ion exchanger and salt. This tip combined solid phase extraction and salting-out assisted liquid‒liquid extraction. Satisfying recoveries of 100 and 80% for retinol and retinol acetate, respectively, and good repeatability were demonstrated. The action of this pipette tip was based on the clean-up workflow in which the interferences were retained on the sorbent. The presence of residual interferences in the extracted samples did not affect the HPLC separation of compounds of interest. The simplicity of the clean-up workflow reduced the time of the sample preparation compared to the bind-wash-elute counterpart workflow. The advantages of our technique are its environmental friendliness and cost effectiveness. The selected pipette tip with an excellent microextraction efficiency enables sample preparation in both clinical research and practice.
- MeSH
- Sodium Chloride MeSH
- Diterpenes * MeSH
- Solid Phase Extraction methods MeSH
- Humans MeSH
- Retinyl Esters MeSH
- Vitamin A * MeSH
- Check Tag
- Humans MeSH
- Publication type
- Journal Article MeSH
The review presents an evaluation of the development of on-line, at-line and in-line sample treatment coupled with capillary and microchip electrophoresis over the last 10 years. In the first part, it describes different types of flow-gating interfaces (FGI) such as cross-FGI, coaxial-FGI, sheet-flow-FGI, and air-assisted-FGI and their fabrication using molding into polydimethylsiloxane and commercially available fittings. The second part deals with the coupling of capillary and microchip electrophoresis with microdialysis, solid-phase, liquid-phase, and membrane based extraction techniques. It mainly focuses on modern techniques such as extraction across supported liquid membrane, electroextraction, single drop microextraction, head space microextraction, and microdialysis with high spatial and temporal resolution. Finally, the design of sequential electrophoretic analysers and fabrication of SPE microcartridges with monolithic and molecularly imprinted polymeric sorbents are discussed. Applications include the monitoring of metabolites, neurotransmitters, peptides and proteins in body fluids and tissues to study processes in living organisms, as well as the monitoring of nutrients, minerals and waste compounds in food, natural and wastewater.
- MeSH
- Electrophoresis, Capillary methods MeSH
- Electrophoresis, Microchip * methods MeSH
- Microdialysis MeSH
- Publication type
- Journal Article MeSH
- Review MeSH
Breast milk analysis provides useful information about acute newborn exposure to harmful substances, such as psychoactive drugs abused by a nursing mother. Since breast milk represents a complex matrix with large amounts of interfering compounds, a comprehensive sample pre-treatment is necessary. This work focuses on determination of amphetamines and synthetic cathinones in human breast milk by microextraction techniques (liquid-phase microextraction and electromembrane extraction), and their comparison to more conventional treatment methods (protein precipitation, liquid-liquid extraction, and salting-out assisted liquid-liquid extraction). The aim of this work was to optimize and validate all the extraction procedures and thoroughly assess their advantages and disadvantages with special regard to their routine clinical use. The applicability of the extractions was further verified by the analysis of six real samples collected from breastfeeding mothers suspected of amphetamine abuse. The membrane microextraction techniques turned out to be the most advantageous as they required low amounts of organic solvents but still provided efficient sample clean-up, excellent quantification limit (0.5 ng mL-1), and good recovery (81-91% and 40-89% for electromembrane extraction and liquid-phase microextraction, respectively). The traditional liquid-liquid extraction as well as the salting-out assisted liquid-liquid extraction showed comparable recoveries (41-85% and 63-88%, respectively), but higher quantification limits (2.5 ng mL-1 and 5 ng mL-1, respectively). Moreover, these methods required multiple operating steps and were time consuming. Protein precipitation was fast and simple, but it demonstrated poor sample clean-up, low recovery (56-58%) and high quantification limit (5 ng mL-1). Based on the overall results, microextraction methods can be considered promising candidates, even for routine laboratory use.
- MeSH
- Amphetamines MeSH
- Liquid-Liquid Extraction MeSH
- Humans MeSH
- Limit of Detection MeSH
- Milk, Human * MeSH
- Liquid Phase Microextraction * MeSH
- Infant, Newborn MeSH
- Solvents MeSH
- Check Tag
- Humans MeSH
- Infant, Newborn MeSH
- Female MeSH
- Publication type
- Journal Article MeSH
Direct analysis of complex samples is demonstrated by the at-line coupling of hollow fiber liquid-phase microextraction (HF-LPME) to capillary electrophoresis (CE). The hyphenation of the preparative and the analytical technique is achieved through a 3D-printed microextraction device with an HF located in a sample vial of a commercial CE instrument. The internal geometry of the device guides the CE separation capillary into the HF and the CE injection of the HF-LPME extract is performed directly from the HF lumen. The 3D-printing process ensures uniform dimensions of the devices, their constant position inside the sample vial, and excellent repeatability of the HF-LPME as well as the CE injection. The devices are cheap (∼0.01 €) and disposable, thus eliminating any possible sample-carryover, moreover, the at-line CE analysis of the extract is performed fully autonomously with no need for operator's intervention. The developed HF-LPME/CE-UV method is applied to the determination of acidic drugs in dried blood spot and wastewater samples and is characterized by excellent repeatability (RSD, 0.6-9.6%), linearity (r2, 0.9991-0.9999), enrichment (EF, 29-97), sensitivity (LOD, 0.2-3.4 μg/L), and sample throughput (7 samples/h). A further improvement of selected characteristics of the analytical method is achieved by the at-line coupling of HF-LPME to capillary isotachophoresis (ITP) with electrospray ionization-mass spectrometry (ESI-MS). The HF-LPME/ITP-ESI-MS system facilitates enhanced selectivity, matrix-free analytical signals, and up to 34-fold better sensitivity due to the use of ESI-MS detection and additional on-capillary ITP preconcentration of the HF-LPME extracts.
Blood is a complex biological matrix providing valuable information on nutritional, metabolic, and immune status. The detection of blood biomarkers requires sensitive analytical methods because analytes are at very low concentrations. Peripheral blood monocytes play a crucial role in inflammatory processes, and the metabolites released by monocytes during these processes might serve as important signalling molecules and biomarkers of particular physiological states. Headspace solid-phase microextraction (HS-SPME) combined with two different mass spectrometric platforms, two-dimensional (2D) gas chromatography coupled to time-of-flight mass spectrometry (2D-GC/TOF-MS) and one-dimensional gas chromatography coupled to Orbitrap mass spectrometry (GC/Orbitrap-MS), were applied for the investigation of volatile organic compounds (VOCs) produced by human peripheral blood monocytes. An optimized method was subsequently applied for the characterization of changes in VOCs induced by lipopolysaccharides (LPS) and zymosan (ZYM) stimulation. Overall, the 2D-GC/TOF-MS and the 1D-GC/Orbitrap-MS analyses each yielded about 4000 and 400 peaks per sample, respectively. In total, 91 VOCs belonging to eight different chemical classes were identified. The samples were collected in two fractions, conditioned media for monitoring extracellularly secreted molecules and cell pellet samples to determine the intracellular composition of VOCs. Alcohols, ketones, and hydrocarbons were the main chemical classes of the metabolic profile identified in cell fractions. Aldehydes, acids and cyclic compounds were characteristic of the conditioned media fraction. Here we demonstrate that HS-SPME-2D-GC/TOF-MS is more suitable for the identification of specific VOC profiles produced by human monocytes than 1D-GC/Orbitrap-MS. We define the signature of VOCs occurring early after monocyte activation and characterise the signalling compounds released by immune cells into media.
Novel method for the determination of a tumor marker homovanillic acid (HVA) in human urine was developed. Combination of hollow fiber - based liquid-phase microextraction (HF-LPME) and differential pulse voltammetry (DPV) at a cathodically pre-treated boron doped diamond electrode (BDDE) was applied for these purposes. Optimum conditions were: butyl benzoate as supported liquid membrane (SLM) formed on polypropylene HF, 0.1 mol L-1 HCl as donor phase, 0.1 mol L-1 sodium phosphate buffer of pH 6 as acceptor phase, and 30 min extraction time. HF-LPME-DPV concentration dependence was linear in the range from 1.2 to 100 μmol L-1. Limits of quantification (LOQ) and detection (LOD) were 1.2 and 0.4 μmol L-1, respectively. The applicability of the developed method was verified by analysis of human urine. Standard addition method was used, found HVA concentration was 13.5 ± 1.3 μmol L-1, RSD = 9.3% (n=5).
- MeSH
- Homovanillic Acid MeSH
- Humans MeSH
- Liquid Phase Microextraction * MeSH
- Biomarkers, Tumor * MeSH
- Chromatography, High Pressure Liquid MeSH
- Check Tag
- Humans MeSH
- Publication type
- Journal Article MeSH
Two new ultra-high performance liquid chromatography (UHPLC) methods for analyzing 21 selected antivirals and their metabolites were optimized, including sample preparation step, LC separation conditions, and tandem mass spectrometry detection. Micro-solid phase extraction in pipette tips was used to extract antivirals from the biological material of Hanks balanced salt medium of pH 7.4 and 6.5. These media were used in experiments to evaluate the membrane transport of antiviral drugs. Challenging diversity of physicochemical properties was overcome using combined sorbent composed of C18 and ion exchange moiety, which finally allowed to cover the whole range of tested antivirals. For separation, reversed-phase (RP) chromatography and hydrophilic interaction liquid chromatography (HILIC), were optimized using extensive screening of stationary and mobile phase combinations. Optimized RP-UHPLC separation was carried out using BEH Shield RP18 stationary phase and gradient elution with 25 mmol/L formic acid in acetonitrile and in water. HILIC separation was accomplished with a Cortecs HILIC column and gradient elution with 25 mmol/L ammonium formate pH 3 and acetonitrile. Tandem mass spectrometry (MS/MS) conditions were optimized in both chromatographic modes, but obtained results revealed only a little difference in parameters of capillary voltage and cone voltage. While RP-UHPLC-MS/MS exhibited superior separation selectivity, HILIC-UHPLC-MS/MS has shown substantially higher sensitivity of two orders of magnitude for many compounds. Method validation results indicated that HILIC mode was more suitable for multianalyte methods. Despite better separation selectivity achieved in RP-UHPLC-MS/MS, the matrix effects were noticed while using both chromatographic modes leading to signal enhancement in RP and signal suppression in HILIC.
- MeSH
- Antiviral Agents chemistry pharmacokinetics MeSH
- Chromatography, Reverse-Phase * MeSH
- Humans MeSH
- Solid Phase Microextraction * MeSH
- Drug Monitoring MeSH
- Reproducibility of Results MeSH
- Tandem Mass Spectrometry * MeSH
- Chromatography, High Pressure Liquid * MeSH
- Check Tag
- Humans MeSH
- Publication type
- Journal Article MeSH
Dragon's blood is the colloquial name for the red resin produced by tree species in the genus Dracaena (Asparagaceae), and the resin is directly involved in plant defensive mechanisms against pathogen and herbivore attack. It is also widely used in traditional folk medicine due to its antiviral, antimicrobial and antitumor activities. In the present work, a method using solid phase microextraction combined with two-dimensional gas chromatography with time-of-flight mass spectrometric detection was developed for the analysis of resin from five Dracaena species, namely Dracaena cinnabari Balf. f., D. serrulata Baker, D. ombet Heuglin ex Kotschy & Peyr., D. draco subsp. draco, and D. draco subsp. ajgal. Twenty terpenoid components in the resins of the five species were identified after comparative study of the volatile metabolite profiles. Monoterpenes were found to be species specific, and the observed differences might be further investigated as a possible means of identifying chemotaxonomic markers. In addition, for the first time, we describe the terpenoid volatile profiles of D. ombet and D. serrulata resins.
In the present work, a disposable microextraction device with a polyamide 6 nano-fibrous supported liquid membrane (SLM) is employed for the pretreatment of minute volumes of biological fluids. The device is placed in a sample vial for an at-line coupling to a commercial capillary electrophoresis instrument with UV-Vis detection (CE-UV) and injections are performed fully automatically from the free acceptor solution above the SLM with no contact between the capillary and the membrane. Up to 4-fold enrichment of model basic (nortriptyline, haloperidol, loperamide, and papaverine) and acidic (ibuprofen, naproxen, ketoprofen, and diclofenac) drugs is achieved by optimizing the ratio of the donor to the acceptor solution volumes (16 to 4 μL, respectively). The actual setup enables SLM extractions from less than a drop of sample and is suitable for pretreatment of scarce human body fluids. Two unique methods are reported for efficient clean-up and enrichment of the basic and acidic drugs from capillary blood (formed as dried blood spot), serum, and urine samples, which enable their determination at therapeutic and/or toxic levels. The hyphenation of the SLM extraction with CE-UV analysis provides good repeatability (RSD, 2.4-14.9%), linearity (r2, 0.988-1.000), sensitivity (LOD, 0.017-0.22 mg L-1), and extraction recovery (ER, 20-106%) at short extraction times (10 min) and with minimum consumption of samples and reagents. Graphical abstract.
- MeSH
- Electrophoresis, Capillary methods MeSH
- Hydrogen-Ion Concentration * MeSH
- Pharmaceutical Preparations metabolism MeSH
- Humans MeSH
- Membranes, Artificial * MeSH
- Liquid Phase Microextraction methods MeSH
- Nanofibers * MeSH
- Reproducibility of Results MeSH
- Body Fluids chemistry MeSH
- Check Tag
- Humans MeSH
- Publication type
- Journal Article MeSH
