In this work, we present a study on reusable thin metal film resistivity-based sensor for direct measurement of binding of thiol containing molecules in liquid samples. While in bulk conductors the DC current is not influenced by the surface events to a measureable degree in a thin metal layer the electrons close to the surface conduct a significant part of electricity and are influenced by the surface interactions. In this study, the thickness of the gold layer was kept below 100 nm resulting in easily measureable resistivity changes of the metal element upon a surface SH-groups binding. No further surface modifications were necessary. Thin film gold layers deposited on a glass substrate by vacuum sputtering were photolithographically structured into four sensing elements arranged in a Wheatstone bridge to compensate for resistance fluctuations due to the temperature changes. Concentrations as low 100 pM provided measureable signals. The surface after the measurement could be electrolytically regenerated for next measurements.
Our study demonstrates that nanoplasmonic sensing (NPS) can be utilized for the determination of the phase transition temperature (Tm) of phospholipids. During the phase transition, the lipid bilayer undergoes a conformational change. Therefore, it is presumed that the Tm of phospholipids can be determined by detecting conformational changes in liposomes. The studied lipids included 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), and 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC). Liposomes in gel phase are immobilized onto silicon dioxide sensors and the sensor cell temperature is increased until passing the Tm of the lipid. The results show that, when the system temperature approaches the Tm, a drop of the NPS signal is observed. The breakpoints in the temperatures are 22.5 °C, 41.0 °C, and 55.5 °C for DMPC, DPPC, and DSPC, respectively. These values are very close to the theoretical Tm values, i.e., 24 °C, 41.4 °C, and 55 °C for DMPC, DPPC, and DSPC, respectively. Our studies prove that the NPS methodology is a simple and valuable tool for the determination of the Tm of phospholipids.
Transient receptor potential ankyrin 1 (TRPA1) is a temperature-sensitive ion channel activated by various pungent and irritant compounds that can produce pain in humans. Its activation involves an allosteric mechanism whereby electrophilic agonists evoke interactions within cytosolic domains and open the channel pore through an integrated nexus formed by intracellular membrane proximal regions that are densely packed beneath the lower segment of the S1-S4 sensor domain. Studies indicate that this part of the channel may contain residues that form a water-accessible cavity that undergoes changes in solvation during channel gating. We identified conserved polar residues facing the putative lower crevice of the sensor domain that were crucial determinants of the electrophilic, voltage, and calcium sensitivity of the TRPA1 channel. This part of the sensor may also comprise a domain capable of binding to membrane phosphoinositides through which gating of the channel is regulated in a state-dependent manner.
- MeSH
- Allosteric Regulation MeSH
- Ion Channel Gating * MeSH
- HEK293 Cells MeSH
- TRPA1 Cation Channel chemistry physiology MeSH
- Protein Conformation MeSH
- Humans MeSH
- Membrane Potentials * MeSH
- Models, Molecular MeSH
- Mutation MeSH
- Mutagenesis, Site-Directed MeSH
- Protein Domains MeSH
- Amino Acid Sequence MeSH
- Sequence Homology MeSH
- Calcium metabolism MeSH
- Check Tag
- Humans MeSH
- Publication type
- Journal Article MeSH
- Research Support, Non-U.S. Gov't MeSH
UNLABELLED: PURPOSE OF THE STUDY Partial weight bearing (PWB) is commonly prescribed post operatively following lower limb fractures and compliance with the weight bearing protocol is an essential element of the rehabilitation. So far it is unknown to what extent patients do comply with PWB during the healing process as instructed by the surgeon. Our aim is to assess a new device for real-time feedback and long-term measurement of PWB of outpatients. The device offers the possibility to monitor the outpatient's activity. The applicability, reliability and validity of the new device should be evaluated. MATERIAL AND METHODS 20 young, healthy subjects complete a course of 500 m that contained several stairs, with a PWB of 15 kg. During the entire test, the axial load, the acceleration and the temperature were measured with a novel insole sensor system. The results were compared with reference measurements performed with a force plate. RESULTS Altogether, the 20 subjects performed 11,106 steps during the completion of the walking circuit. In 23.6% of the steps, the subjects applied a PWB of 10 to 20 kg. In 5.5% of all steps, PWB was superior to 60 kg. The mean bias of the insole was 11,58 N. Limits of agreement were +/- 125 N and the interclass correlation coefficient was r = 0.945. CONCLUSIONS The presented sensor sole might be a useful tool to obtain more precise insight of outpatients' activity and load to the injured limb during the healing process. Furthermore, these results demonstrate that even young and healthy subjects are not able to keep the prescribed PWB. This raises the question, if patients who have been recently operated are able to follow the instructions concerning the PWB. KEY WORDS: partial weight bearing (PWB), insole sensor system, sensor sole, monitoring, outpatients.
- MeSH
- Walking physiology MeSH
- Fractures, Bone rehabilitation surgery MeSH
- Humans MeSH
- Foot Orthoses * MeSH
- Outpatients MeSH
- Feedback, Sensory MeSH
- Weight-Bearing * MeSH
- Healthy Volunteers MeSH
- Check Tag
- Humans MeSH
- Male MeSH
- Female MeSH
- Publication type
- Journal Article MeSH
OBJECTIVE: Shear viscosity and ion viscosity of uncured visible light-curing (VLC) resins and resin based composites (RBC) are correlated with respect to the resin composition, temperature and filler content to check where Dielectric Analysis (DEA) investigations of VLC RBC generate similar results as viscosity measurements. METHODS: Mixtures of bisphenol A glycidyl methacrylate (Bis-GMA) and triethylene glycol dimethacrylate (TEGDMA) as well as the pure resins were investigated and compared with two commercial VLC dental resins and RBCs (VOCO, Arabesk Top and Grandio). Shear viscosity data was obtained using a Haake Mars III, Thermo Scientific. Ion viscosity measurements performed by a dielectric cure analyzer (DEA 231/1 Epsilon with Mini IDEX-Sensor, Netzsch-Gerätebau). RESULTS: Shear viscosity depends reciprocally on the mobility of molecules, whereas the ion viscosity also depends on the ion concentration as it is affected by both ion concentration and mixture viscosity. Except of pure TEGDMA, shear and ion viscosities depend on the resin composition qualitatively in a similar manner. Furthermore, shear and ion viscosities of the commercial VLC dental resins and composites exhibited the same temperature dependency regardless of filler content. Application of typical rheological models (Kitano and Quemada) revealed that ion viscosity measurements can be described with respect to filler contents of up to 30vol.%. SIGNIFICANCE: Rheological behavior of a VLC RBC can be characterized by DEA under the condition that the ion concentration is kept constant. Both methods address the same physical phenomenon - motion of molecules. The proposed relations allows for calculating the viscosity of any Bis-GMA-TEGDMA mixture on the base of the viscosities of the pure components. This study demonstrated the applicability of DEA investigations of VLC RBCs with respect to quality assurance purposes.
- MeSH
- Child MeSH
- Incubators MeSH
- Humans MeSH
- Metabolism MeSH
- Infant, Newborn MeSH
- Body Temperature MeSH
- Check Tag
- Child MeSH
- Humans MeSH
- Infant, Newborn MeSH
Seed germination is an important life-cycle transition because it determines subsequent plant survival and reproductive success. To detect optimal spatiotemporal conditions for germination, seeds act as sophisticated environmental sensors integrating information such as ambient temperature. Here we show that the delay of germination 1 (DOG1) gene, known for providing dormancy adaptation to distinct environments, determines the optimal temperature for seed germination. By reciprocal gene-swapping experiments between Brassicaceae species we show that the DOG1-mediated dormancy mechanism is conserved. Biomechanical analyses show that this mechanism regulates the material properties of the endosperm, a seed tissue layer acting as germination barrier to control coat dormancy. We found that DOG1 inhibits the expression of gibberellin (GA)-regulated genes encoding cell-wall remodeling proteins in a temperature-dependent manner. Furthermore we demonstrate that DOG1 causes temperature-dependent alterations in the seed GA metabolism. These alterations in hormone metabolism are brought about by the temperature-dependent differential expression of genes encoding key enzymes of the GA biosynthetic pathway. These effects of DOG1 lead to a temperature-dependent control of endosperm weakening and determine the optimal temperature for germination. The conserved DOG1-mediated coat-dormancy mechanism provides a highly adaptable temperature-sensing mechanism to control the timing of germination.
- MeSH
- Arabidopsis genetics growth & development physiology MeSH
- Biomechanical Phenomena MeSH
- Diploidy MeSH
- Plants, Genetically Modified MeSH
- Gibberellins metabolism MeSH
- Germination genetics physiology MeSH
- Conserved Sequence MeSH
- Lepidium sativum genetics growth & development physiology MeSH
- Molecular Sequence Data MeSH
- Mutation MeSH
- Arabidopsis Proteins genetics MeSH
- Gene Expression Regulation, Plant MeSH
- Genes, Plant MeSH
- Seeds growth & development MeSH
- Temperature MeSH
- Plant Dormancy genetics physiology MeSH
- Gene Expression Regulation, Developmental MeSH
- Publication type
- Journal Article MeSH
- Research Support, Non-U.S. Gov't MeSH
In this article, we briefly describe the design, construction, and functional verification of a hybrid multichannel fiber-optic sensor system for basic vital sign monitoring. This sensor uses a novel non-invasive measurement probe based on the fiber Bragg grating (FBG). The probe is composed of two FBGs encapsulated inside a polydimethylsiloxane polymer (PDMS). The PDMS is non-reactive to human skin and resistant to electromagnetic waves, UV absorption, and radiation. We emphasize the construction of the probe to be specifically used for basic vital sign monitoring such as body temperature, respiratory rate and heart rate. The proposed sensor system can continuously process incoming signals from up to 128 individuals. We first present the overall design of this novel multichannel sensor and then elaborate on how it has the potential to simplify vital sign monitoring and consequently improve the comfort level of patients in long-term health care facilities, hospitals and clinics. The reference ECG signal was acquired with the use of standard gel electrodes fixed to the monitored person's chest using a real-time monitoring system for ECG signals with virtual instrumentation. The outcomes of these experiments have unambiguously proved the functionality of the sensor system and will be used to inform our future research in this fast developing and emerging field.
- MeSH
- Respiratory Rate MeSH
- Humans MeSH
- Monitoring, Physiologic MeSH
- Optical Fibers MeSH
- Heart Rate MeSH
- Fiber Optic Technology * MeSH
- Check Tag
- Humans MeSH
- Publication type
- Journal Article MeSH
Transient receptor potential ankyrin 1 channel (TRPA1) serves as a key sensor for reactive electrophilic compounds across all species. Its sensitivity to temperature, however, differs among species, a variability that has been attributed to an evolutionary divergence. Mouse TRPA1 was implicated in noxious cold detection but was later also identified as one of the prime noxious heat sensors. Moreover, human TRPA1, originally considered to be temperature-insensitive, turned out to act as an intrinsic bidirectional thermosensor that is capable of sensing both cold and heat. Using electrophysiology and modeling, we compare the properties of human and mouse TRPA1, and we demonstrate that both orthologues are activated by heat, and their kinetically distinct components of voltage-dependent gating are differentially modulated by heat and cold. Furthermore, we show that both orthologues can be strongly activated by cold after the concurrent application of voltage and heat. We propose an allosteric mechanism that could account for the variability in TRPA1 temperature responsiveness.
- MeSH
- Models, Biological MeSH
- Species Specificity MeSH
- Electrophysiology methods MeSH
- HEK293 Cells MeSH
- TRPA1 Cation Channel metabolism MeSH
- Humans MeSH
- Mice MeSH
- Voltage-Dependent Anion Channels metabolism physiology MeSH
- Cold Temperature MeSH
- Amino Acid Sequence MeSH
- Hot Temperature MeSH
- Animals MeSH
- Check Tag
- Humans MeSH
- Mice MeSH
- Animals MeSH
- Publication type
- Journal Article MeSH
