solid-state structures
Dotaz
Zobrazit nápovědu
Solid dispersions of active pharmaceutical ingredients are of increasing interest due to their versatile use. In the present study polyvinylpyrrolidone (PVP), poly[N-(2-hydroxypropyl)-metacrylamide] (pHPMA), poly(2-ethyl-2-oxazoline) (PEOx), and polyethylene glycol (PEG), each in three Mw, were used to demonstrate structural diversity of solid dispersions. Acetylsalicylic acid (ASA) was used as a model drug. Four distinct types of the solid dispersions of ASA were created using a freeze-drying method: (i) crystalline solid dispersions containing nanocrystalline ASA in a crystalline PEG matrix; (ii) amorphous glass suspensions with large ASA crystallites embedded in amorphous pHPMA; (iii) solid solutions with molecularly dispersed ASA in rigid amorphous PVP; and (iv) nanoheterogeneous solid solutions/suspensions containing nanosized ASA clusters dispersed in a semiflexible matrix of PEOx. The obtained structural data confirmed that the type of solid dispersion can be primarily controlled by the chemical constitutions of the applied polymers, while the molecular weight of the polymers had no detectable impact. The molecular structure of the prepared dispersions was characterized using solid-state NMR, wide-angle X-ray scattering (WAXS), and differential scanning calorimetry (DSC). By applying various (1)H-(13)C and (1)H-(1)H correlation experiments combined with T1((1)H) and T1ρ((1)H) relaxation data, the extent of the molecular mixing was determined over a wide range of distances, from intimate intermolecular contacts (0.1-0.5 nm) up to the phase-separated nanodomains reaching ca. 500 nm. Hydrogen-bond interactions between ASA and polymers were probed by the analysis of (13)C and (15)N CP/MAS NMR spectra combined with the measurements of (1)H-(15)N dipolar profiles. Overall potentialities and limitations of individual experimental techniques were thoroughly evaluated.
Changes in the protonation state of lyophilized proteins can impact structural integrity, chemical stability, and propensity to aggregate upon reconstitution. When a buffer is chosen, the freezing/drying process may result in dramatic changes in the protonation state of the protein due to ionization shift of the buffer. In order to determine whether protonation shifts are occurring, ionizable probes can be added to the formulation. Optical probes (dyes) have shown dramatic ionization changes in lyophilized products, but it is unclear whether the pH indicator is uniform throughout the matrix and whether the change in the pH indicator actually mirrors drug ionization changes. In solid-state NMR (SSNMR) spectroscopy, the chemical shift of the carbonyl carbon in carboxylic acids is very sensitive to the ionization state of the acid. Therefore, SSNMR can be used to measure ionization changes in a lyophilized matrix by employing a small quantity of an isotopically-labeled carboxylic acid species in the formulation. This paper compares the apparent pH of six trehalose-containing lyophilized buffer systems using SSNMR and UV-Vis diffuse reflectance spectroscopy (UVDRS). Both SSNMR and UVDRS results using two different ionization probes (butyric acid and bromocresol purple, respectively) showed little change in apparent acidity compared to the pre-lyophilized solution in a sodium citrate buffer, but a greater change was observed in potassium phosphate, sodium phosphate, and histidine buffers. While the trends between the two methods were similar, there were differences in the numerical values of equivalent pH (pHeq) observed between the two methods. The potential causes contributing to the differences are discussed.
- MeSH
- fosfáty * chemie MeSH
- histidin * chemie MeSH
- koncentrace vodíkových iontů MeSH
- kyselina citronová chemie MeSH
- lyofilizace * metody MeSH
- magnetická rezonanční spektroskopie * metody MeSH
- pufry MeSH
- spektrofotometrie ultrafialová metody MeSH
- trehalosa * chemie MeSH
- Publikační typ
- časopisecké články MeSH
New drug formulations are sought for poorly water-soluble substances because there is a risk of compromised bioavailability if such substances are administered orally. Such active pharmaceutical ingredients can be reformulated as solid dispersions with suitable water-soluble polymers. In this contribution, formulation of a novel and physically stable dispersion of Simvastatin in poly(2-hydroxypropyl) methacrylamide (pHPMA) is demonstrated. Due to the limited water sorption of pHPMA and a high Tg, the prepared dispersion is more suited for oral administration and storage compared with neat amorphous Simvastatin. Surprisingly, the rate of global reorientation and the internal motion of Simvastatin molecules were enhanced and exhibited dynamical heterogeneities when incorporated into the pHPMA matrix. As revealed by solid-state nuclear magnetic resonance combined with Raman spectroscopy exploiting the fluorescence phenomenon the mobility of the ester and lactone components increased considerably, whereas the naphthalene ring remained rigid. Furthermore, the solid dispersion was found to be nano-heterogeneous with nanometer-sized Simvastatin domains. The presence of these clusters had no impact on the dynamics of the rigid pHPMA chains. Thus, the diffusion of Simvastatin molecules through the glassy pHPMA walls and the subsequent transformation of the clusters into larger crystallites were prevented. No crystallization was detected for more than two years.
- MeSH
- adsorpce MeSH
- diferenciální skenovací kalorimetrie MeSH
- kyseliny polymethakrylové chemie MeSH
- magnetická rezonanční spektroskopie MeSH
- molekulární struktura MeSH
- Ramanova spektroskopie MeSH
- simvastatin chemie MeSH
- stabilita léku MeSH
- voda chemie MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
Sensitivity and resolution together determine the quality of NMR spectra in biological solids. For high-resolution structure determination with solid-state NMR, proton-detection emerged as an attractive strategy in the last few years. Recent progress in probe technology has extended the range of available MAS frequencies up to above 100 kHz, enabling the detection of resolved resonances from sidechain protons, which are important reporters of structure. Here we characterise the interplay between MAS frequency in the newly available range of 70-110 kHz and proton content on the spectral quality obtainable on a 1 GHz spectrometer for methyl resonances. Variable degrees of proton densities are tested on microcrystalline samples of the α-spectrin SH3 domain with selectively protonated methyl isotopomers (CH3, CH2D, CHD2) in a perdeuterated matrix. The experimental results are supported by simulations that allow the prediction of the sensitivity outside this experimental frequency window. Our results facilitate the selection of the appropriate labelling scheme at a given MAS rotation frequency.
The solid-state NMR measurements play an indispensable role in studies of interactions between biological membranes and peptaibols, which are amphipathic oligopeptides with a high abundance of alpha-aminobutyric acid (Aib). The solid-state NMR investigations are important in establishing the molecular models of the pore forming and antimicrobial properties of peptaibols, but rely on certain simplifications. Some of the underlying assumptions concern the parameters describing the 15N NMR chemical shielding tensor (CST) of the amide nitrogens in Aib and in conventional amino acids. Here the density functional theory (DFT) based calculations were applied to the known crystal structure of one of peptaibols, Ampullosporin A, in order to explicitly describe the variation of the 15N NMR parameters within its backbone. Based on the DFT computational data it was possible to verify the validity of the assumptions previously made about the differences between Aib and other amino acids in the isotropic part of the CST. Also the trends in the magnitudes and orientations of the anisotropic components of the CST, as revealed by the DFT calculations of the full periodic structure of Ampullosporin A, were thoroughly analyzed, and may be employed in future studies of peptaibols.
Fructosyltransferase (FTase) catalyzes the transfer of a fructosyl group to a sucrose molecule or a fructooligosaccharide (FOS) when a FOS with a longer chain is formed. Production of FTase by two Aspergillus species and its mixture was exploited using solid-state fermentation (SSF) and employing agave sap as substrate. The maximum FTase activity (1.59 U/mL) by Aspergillus oryzae was obtained after 24 h, using a temperature of 30 °C, with an inoculum of 2 × 107 spores/mL. The nucleotide sequence coding for the fructosyltransferase showed 1494 bp and encodes for a protein of 498 amino acids. The hypothetical molecular tertiary structure of Aspergillus oryzae BM-DIA FTase showed the presence of structural domains, such as a five-bladed beta-propeller domain characteristic of GH (glycoside hydrolase) and C terminal, which forms a beta-sandwich module. This study contributes to the knowledge of stability, compatibility, and genetic expression of Aspergillus oryzae BM-DIA under SSF bioprocess conditions for industrial production of fructosyltransferase.
Layered double hydroxides have been proposed as effective sorbents for As(V), but studies investigating adsorption mechanisms usually lack a comprehensive mechanistic/modeling approach. In this work, we propose coupling surface complexation modeling with various spectroscopic techniques. To this end, a series of batch experiments at different pH values were performed. Kinetic data were well fitted by a pseudo-second order kinetic model, and the equilibrium data were fitted by the Freundlich model. Moreover, the pH-dependent As(V) sorption data were satisfactorily fitted by a diffuse layer model, which described the formation of >SOAsO3H(-) monodentate and >(SO)2AsO2(-) bidentate inner-sphere complexes (">S" represents a crystallographically-bound group on the surface). Additionally, XPS analyses confirmed the adsorption mechanisms. The sorption mechanisms were affected by anion exchange, which was responsible for the formation of outer sphere complexes, as identified by XRD and FTIR analyses. Furthermore, a homogenous distribution of As(V) was determined by HR-TEM with elemental mapping. Using low-temperature Mössbauer spectroscopy on isotope (57)Fe, a slight shift of the hyperfine parameters towards higher values following As(V) sorption was measured, indicating a higher degree of structural disorder. In general, mechanistic adsorption modeling coupled with solid state analyses presents a powerful approach for investigating the adsorption mechanism of As(V) on Mg-Fe LDH or other sorbents.
- MeSH
- adsorpce MeSH
- arseničnany chemie izolace a purifikace MeSH
- difrakce rentgenového záření MeSH
- hydroxid hořečnatý chemie MeSH
- kinetika MeSH
- koncentrace vodíkových iontů MeSH
- povrchové vlastnosti MeSH
- roztoky MeSH
- spektroskopie infračervená s Fourierovou transformací MeSH
- teoretické modely * MeSH
- železité sloučeniny chemie MeSH
- Publikační typ
- časopisecké články MeSH
Complex forming capabilities of [(η(6)-p-cymene)Ru(H2O)3](2+) with aminohydroxamates (2-amino-N-hydroxyacetamide (α-alahaH), 3-amino-N-hydroxypropanamide (β-alahaH) and 4-amino-N-hydroxybutanamide (γ-abhaH)) having the primary amino group in different chelatable position to the hydroxamic function were studied by pH-potentiometry, NMR and MS methods. Formation of stable [O,O] and mixed [O,O][N,N] chelated mono- and dinuclear species is detected in partially slow with α-alahaH and β-alahaH or in fast processes with γ-abhaH and the formation constants of the complexes present in aqueous solution are reported. Synthesis, spectral (NMR, IR) and ESI mass spectrometric characterization of novel dinuclear α-alaninehydroximato complexes containing the half-sandwich type Ru(II) core is described. The crystal and molecular structure of [{(η(6)-p-cymene)Ru}2(μ(2)-α-alahaH-1)(H2O)Br]Br∙H2O (1) and [{(η(6)-p-cymene)Ru}2(μ(2)-α-alahaH-1)(H2O)Cl]BF4∙H2O (2) was determined by single crystal X-ray diffraction method. In the complexes one half-sandwich core is coordinated by a hydroxamate [O,O] chelate while the other one by [Namino,Nhydroxamate] fashion of the bridging ligand. In both cases the remaining coordination sites of one of the Ru cores are taken by a halide ion whiles the other one by a water molecule. Reaction of 2 with 9-methylguanine indicates the N7 coordination of this simple DNA model. Complexes 1 and 2 were tested for their in vitro cytotoxicity using human-derived cancer cell lines (A2780, MCF-7, SKOV-3, HCT-116, HeLa) and showed no anti-proliferative activity in the micromolar concentration range.
- MeSH
- GABA analogy a deriváty chemie MeSH
- guanin analogy a deriváty chemie MeSH
- HCT116 buňky MeSH
- HeLa buňky MeSH
- kationty dvojmocné MeSH
- komplexní sloučeniny chemická syntéza farmakologie MeSH
- krystalografie rentgenová MeSH
- kyseliny hydroxamové chemie MeSH
- lidé MeSH
- MFC-7 buňky MeSH
- molekulární modely MeSH
- monoterpeny chemie MeSH
- nádorové buněčné linie MeSH
- organokovové sloučeniny chemická syntéza farmakologie MeSH
- protinádorové látky chemická syntéza farmakologie MeSH
- ruthenium chemie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
Reliable values of the solid-state NMR (SSNMR) parameters together with precise structural data specific for a given amino acid site in an oligopeptide are needed for the proper interpretation of measurements aiming at an understanding of oligopeptides' function. The periodic density functional theory (DFT)-based computations of geometries and SSNMR chemical shielding tensors (CSTs) of solids are shown to be accurate enough to support the SSNMR investigations of suitably chosen models of oriented samples of oligopeptides. This finding is based on a thorough comparison between the DFT and experimental data for a set of tripeptides with both 13Cα and 15Namid CSTs available from the single-crystal SSNMR measurements and covering the three most common secondary structural elements of polypeptides. Thus, the ground is laid for a quantitative description of local spectral parameters of crystalline oligopeptides, as demonstrated for the backbone 15Namid nuclei of samarosporin I, which is a pentadecapeptide (composed of five classical and ten nonproteinogenic amino acids) featuring a strong antimicrobial activity.
