BACKGROUND: The picture archiving and communication system (PACS) has already replaced classic hard copy film technology. With new functions of PACS under consideration, attention turns to the sharing of medical images between different institutions. The Czech Republic is one of the few countries using a nation-wide medical images exchange system known as ePACS. It is based on dedicated hardware and one central router, although theoretical models tend to prefer cloud-based sharing. OBJECTIVE: Despite its simple design and lack of advanced features, this system has successively evolved into a widely used tool. The aim of this article is to offer an overview of its use and functions and to show that even a simple system can be widely used. METHODS: Using data from the producer of ePACS (the ICZ company) and from other sources, the system was described and data about its performance have been obtained. RESULTS: Every acute-care hospital (140) and about a quarter of outpatient facilities (105) in the Czech Republic are now equipped with ePACS and are therefore able to share medical images. The number of studies transmitted rises every year, from 12,000 in 2008 to more than 640,000 in 2018, which is approximately 4% of all studies produced. The system was primarily designed and is used to share images between acute-care hospitals but a very special usage has also evolved, as it is employed in a teleradiology service with private enterprises too. CONCLUSION: ePACS is expanding in the Czech Republic despite having only limited functions and despite its principle that simply copies a classic workflow when sending studies on Compact Discs. Although other systems for image sharing might be more advanced, ePACS brings to the Czech health care system the capability to exchange medical images on a national level.
- MeSH
- komunikace * MeSH
- lidé MeSH
- nemocnice MeSH
- počítačové zpracování obrazu * MeSH
- radiologické informační systémy * MeSH
- zdravotnická zařízení MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- Geografické názvy
- Česká republika MeSH
- MeSH
- diagnostické zobrazování * metody přístrojové vybavení využití MeSH
- kalibrace normy MeSH
- lékařská informatika * metody přístrojové vybavení trendy MeSH
- lidé MeSH
- magnetická rezonanční tomografie metody přístrojové vybavení využití MeSH
- počítačová rentgenová tomografie metody přístrojové vybavení využití MeSH
- počítačové terminály využití MeSH
- radiologické informační systémy klasifikace trendy využití MeSH
- referenční standardy MeSH
- řízení kvality MeSH
- robotika metody trendy využití MeSH
- technologie lékařská * metody normy trendy MeSH
- telemedicína metody trendy využití MeSH
- Check Tag
- lidé MeSH
- Klíčová slova
- obměna přístrojového vybavení, mobilní skiagrafický přístroj, sdílení detektorů,
- MeSH
- centralizované nemocniční služby * MeSH
- chirurgie organizace a řízení přístrojové vybavení trendy MeSH
- diagnostické zobrazování * dějiny přístrojové vybavení využití MeSH
- lidé MeSH
- radiologické informační systémy využití MeSH
- rentgendiagnostika metody přístrojové vybavení trendy MeSH
- zdravotnické prostředky * MeSH
- Check Tag
- lidé MeSH
INTRODUCTION: The process of fabricating physical medical skull models requires many steps, each of which is a potential source of geometric error. The aim of this study was to demonstrate inaccuracies and differences caused by DICOM to STL conversion in additively manufactured medical skull models. MATERIAL AND METHODS: Three different institutes were requested to perform an automatic reconstruction from an identical DICOM data set of a patients undergoing tumour surgery into an STL file format using their software of preference. The acquired digitized STL data sets were assessed and compared and subsequently used to fabricate physical medical skull models. The three fabricated skull models were then scanned, and differences in the model geometries were assessed using established CAD inspection software methods. RESULTS: A large variation was noted in size and anatomical geometries of the three physical skull models fabricated from an identical (or "a single") DICOM data set. CONCLUSIONS: A medical skull model of the same individual can vary markedly depending on the DICOM to STL conversion software and the technical parameters used. Clinicians should be aware of this inaccuracy in certain applications.
- MeSH
- algoritmy MeSH
- design s pomocí počítače statistika a číselné údaje MeSH
- kefalometrie statistika a číselné údaje MeSH
- lebka anatomie a histologie MeSH
- lidé MeSH
- mandibula anatomie a histologie MeSH
- modely anatomické * MeSH
- nosní dutina anatomie a histologie MeSH
- orbita anatomie a histologie MeSH
- počítačová tomografie s kuželovým svazkem statistika a číselné údaje MeSH
- počítačové zpracování obrazu statistika a číselné údaje MeSH
- povrchové vlastnosti MeSH
- radiologické informační systémy statistika a číselné údaje MeSH
- sinus maxillaris anatomie a histologie MeSH
- software MeSH
- zobrazování trojrozměrné statistika a číselné údaje MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
- srovnávací studie MeSH