3D plotting
Dotaz
Zobrazit nápovědu
In this work, we have examined an electrochemical behavior of the ephedrine at the polarized liquid-liquid interface (water/1,2-dichloroethane). In this respect, we first designed and then 3D printed polyamide-based electrochemical cell that was used as the liquid-liquid interface support during electroanalytical measurements. The protonated ephedrine undergoes a reversible ion transfer reaction with the standard Galvani potential difference equal to +0.269 V. This value was used to calculate the water - 1,2-dichloroethane logP equal to -4.6. Ion transfer voltammetry was used to build the calibration curve and allowed for the ephedrine detection from concentration equal to 20 μM. By varying the pH of the aqueous phase from 2 up to 12 we were able to plot the ion partition diagram that was further analyzed and provided several pharmacochemical information. To further push this work towards practical utility, we have formulated the artificial urine and studied the interfacial behavior of all its components at the polarized liquid-liquid interface. Ephedrine detection from real spiked urine samples was also performed.
- MeSH
- 3D tisk * MeSH
- efedrin * chemie MeSH
- ethylendichloridy * MeSH
- voda MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
AIM: The aim of the study is to investigate the value of preoperative power Doppler sonography with 3D reconstruction (3D-PDS) for diagnostics of extraprostatic extension of prostate cancer. PATIENTS AND METHODS: In the prospective study we examined 146 patients with clinically localized prostate cancer who underwent radical prostatectomy. Prior to surgery, each patient underwent 3D-PDS, transrectal ultrasound (TRUS), and digital rectal examination (DRE). Furthermore, we determined the prostate volume, prostate specific antigen (PSA) level, PSA density (PSAD), and Gleason score. The risk of locally advanced cancer was assessed using Partin tables. We determined the sensitivity, specificity, and predictive values of these diagnostic procedures. We plotted the receiver operating characteristic (ROC) curves and calculated the areas under the curves (AUC). Multivariate logistic regression was used to identify the significant predictors of extraprostatic tumor extension. Based on this we developed diagnostic nomograms maximizing the probability of accurate diagnosis. RESULTS: The significant differences between patients with organ confined and locally advanced tumor (based on the postoperative assessment) were observed in the PSA levels (P < 0.014), PSAD (P < 0.004), DRE (P < 0.037), TRUS (P < 0.003), and 3D-PDS (P < 0.000). The highest AUC value of 0.776 (P < 0.000) was found for 3D-PDS. The observed AUC value for TRUS was 0.670 (P < 0.000) and for PSAD 0.639 (P < 0.004). In multivariate regression analysis, the PSAD, preoperative Gleason score, and 3D-PDS finding were identified as significant preoperative predictors of extraprostatic tumor extension. CONCLUSION: Our data suggest that the 3D-PDS is a valuable preoperative diagnostic examination to identify locally advanced prostate cancer. Therefore, it can be used to maximize the probability of the accurate diagnosis of extraprostatic tumor extension.
- MeSH
- interpretace obrazu počítačem metody MeSH
- lidé středního věku MeSH
- lidé MeSH
- multivariační analýza MeSH
- nádory mužských pohlavních orgánů sekundární MeSH
- nádory prostaty chirurgie patologie ultrasonografie MeSH
- prospektivní studie MeSH
- prostatektomie MeSH
- rizikové faktory MeSH
- semenné váčky patologie MeSH
- senioři MeSH
- senzitivita a specificita MeSH
- ultrasonografie dopplerovská metody MeSH
- zobrazování trojrozměrné metody MeSH
- Check Tag
- lidé středního věku MeSH
- lidé MeSH
- mužské pohlaví MeSH
- senioři MeSH
- Publikační typ
- hodnotící studie MeSH
- srovnávací studie MeSH
Direct ink writing (DIW) techniques open up new possibilities for the fabrication of patient-specific bone grafts. Self-setting calcium phosphate inks, which harden at low temperature, allow obtaining nanostructured scaffolds with biomimetic properties and enhanced bioactivity. However, the slow hardening kinetics hampers the translation to the clinics. Different hydrothermal treatments for the consolidation of DIW scaffolds fabricated with an α-tricalcium phosphate /pluronic F127 ink were explored, comparing them with a biomimetic treatment. Three different scaffold architectures were analysed. The hardening process, associated to the conversion of α-tricalcium phosphate to hydroxyapatite was drastically accelerated by the hydrothermal treatments, reducing the time for complete reaction from 7 days to 30 minutes, while preserving the scaffold architectural integrity and retaining the nanostructured features. β-tricalcium phosphate was formed as a secondary phase, and a change of morphology from plate-like to needle-like crystals in the hydroxyapatite phase was observed. The binder was largely released during the treatment. The hydrothermal treatment resulted in a 30% reduction of the compressive strength, associated to the residual presence of β-tricalcium phosphate. Biomimetic and hydrothermally treated scaffolds supported the adhesion and proliferation of rat mesenchymal stem cells, indicating a good suitability for bone tissue engineering applications. STATEMENT OF SIGNIFICANCE: 3D plotting has opened up new perspectives in the bone regeneration field allowing the customisation of synthetic bone grafts able to fit patient-specific bone defects. Moreover, this technique allows the control of the scaffolds' architecture and porosity. The present work introduces a new method to harden biomimetic hydroxyapatite 3D-plotted scaffolds which avoids high-temperature sintering. It has two main advantages: i) it is fast and simple, reducing the whole fabrication process from the several days required for the biomimetic processing to a few hours; and ii) it retains the nanostructured character of biomimetic hydroxyapatite and allows controlling the porosity from the nano- to the macroscale. Moreover, the good in vitro cytocompatibility results support its suitability for cell-based bone regeneration therapies.
- MeSH
- buněčná adheze MeSH
- fosforečnany vápenaté chemie MeSH
- inkoust * MeSH
- krysa rodu rattus MeSH
- mezenchymální kmenové buňky cytologie metabolismus MeSH
- nanostruktury chemie MeSH
- pevnost v tlaku MeSH
- polyethyleny chemie MeSH
- polypropyleny chemie MeSH
- potkani inbrední LEW MeSH
- tkáňové podpůrné struktury chemie MeSH
- vysoká teplota MeSH
- zvířata MeSH
- Check Tag
- krysa rodu rattus MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
OBJECTIVE: Facial attractiveness is an important factor in our social interactions. It is still not entirely clear which factors influence the attractiveness of a face and facial asymmetry appears to play a certain role. The aim of the present study was to assess the association between facial attractiveness and regional facial asymmetries evaluated on three-dimensional (3D) images. METHODS: 3D facial images of 59 (23 male, 36 female) young adult patients (age 16-25 years) before orthodontic treatment were evaluated for asymmetry. The same 3D images were presented to 12 lay judges who rated the attractiveness of each subject on a 100mm visual analogue scale. Reliability of the method was assessed with Bland-Altman plots and Cronbach's alpha coefficient. RESULTS: All subjects showed a certain amount of asymmetry in all regions of the face; most asymmetry was found in the chin and cheek areas and less in the lip, nose and forehead areas. No statistically significant differences in regional facial asymmetries were found between male and female subjects (P > 0.05). Regression analyses demonstrated that the judgement of facial attractiveness was not influenced by absolute regional facial asymmetries when gender, facial width-to-height ratio and type of malocclusion were controlled (P > 0.05). LIMITATIONS: A potential limitation of the study could be that other biologic and cultural factors influencing the perception of facial attractiveness were not controlled for. CONCLUSIONS: A small amount of asymmetry was present in all subjects assessed in this study, and asymmetry of this magnitude may not influence the assessment of facial attractiveness.
- MeSH
- anatomická značka MeSH
- asymetrie obličeje patologie psychologie MeSH
- brada patologie MeSH
- čelo patologie MeSH
- dospělí MeSH
- estetika stomatologická * MeSH
- fotogrammetrie metody MeSH
- lidé MeSH
- malokluze patologie MeSH
- mínění MeSH
- mladiství MeSH
- mladý dospělý MeSH
- nos patologie MeSH
- obličej patologie MeSH
- postoj ke zdraví MeSH
- reprodukovatelnost výsledků MeSH
- tvář patologie MeSH
- zobrazování trojrozměrné metody MeSH
- Check Tag
- dospělí MeSH
- lidé MeSH
- mladiství MeSH
- mladý dospělý MeSH
- mužské pohlaví MeSH
- ženské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
OBJECTIVES: To assess whether vessel morphology depicted by three-dimensional (3D) power Doppler ultrasound improves discrimination between benignity and malignancy if used as a second-stage test in adnexal masses that are difficult to classify. METHODS: This was a prospective observational international multicenter diagnostic accuracy study. Consecutive patients with an adnexal mass underwent standardized transvaginal two-dimensional (2D) grayscale and color or power Doppler and 3D power Doppler ultrasound examination by an experienced examiner, and those with a 'difficult' tumor were included in the current analysis. A difficult tumor was defined as one in which the International Ovarian Tumor Analysis (IOTA) logistic regression model-1 (LR-1) yielded an ambiguous result (risk of malignancy, 8.3% to 25.5%), or as one in which the ultrasound examiner was uncertain regarding classification as benign or malignant when using subjective assessment. Even when the ultrasound examiner was uncertain, he/she was obliged to classify the tumor as most probably benign or most probably malignant. For each difficult tumor, one researcher created a 360° rotating 3D power Doppler image of the vessel tree in the whole tumor and another of the vessel tree in a 5-cm3 spherical volume selected from the most vascularized part of the tumor. Two other researchers, blinded to the patient's history, 2D ultrasound findings and histological diagnosis, independently described the vessel tree using predetermined vessel features. Their agreed classification was used. The reference standard was the histological diagnosis of the mass. The sensitivity of each test for discriminating between benign and malignant difficult tumors was plotted against 1 - specificity on a receiver-operating-characteristics diagram, and the test with the point furthest from the reference line was considered to have the best diagnostic ability. RESULTS: Of 2403 women with an adnexal mass, 376 (16%) had a difficult mass. Ultrasound volumes were available for 138 of these cases. In 79/138 masses, the ultrasound examiner was uncertain about the diagnosis based on subjective assessment, in 87/138, IOTA LR-1 yielded an ambiguous result and, in 28/138, both methods gave an uncertain result. Of the masses, 38/138 (28%) were malignant. Among tumors that were difficult to classify as benign or malignant by subjective assessment, the vessel feature 'densely packed vessels' had the best discriminative ability (sensitivity 67% (18/27), specificity 83% (43/52)) and was slightly superior to subjective assessment (sensitivity 74% (20/27), specificity 60% (31/52)). In tumors in which IOTA LR-1 yielded an ambiguous result, subjective assessment (sensitivity 82% (14/17), specificity 79% (55/70)) was superior to the best vascular feature, i.e. changes in the diameter of vessels in the whole tumor volume (sensitivity 71% (12/17), specificity 69% (48/70)). CONCLUSION: Vessel morphology depicted by 3D power Doppler ultrasound may slightly improve discrimination between benign and malignant adnexal tumors that are difficult to classify by subjective ultrasound assessment. For tumors in which the IOTA LR-1 model yields an ambiguous result, subjective assessment is superior to vessel morphology as a second-stage test. © 2020 The Authors. Ultrasound in Obstetrics & Gynecology published by John Wiley & Sons Ltd on behalf of International Society of Ultrasound in Obstetrics and Gynecology.
- MeSH
- adenom diagnostické zobrazování patofyziologie MeSH
- lidé středního věku MeSH
- lidé MeSH
- nádory vaječníků diagnostické zobrazování patofyziologie MeSH
- nemoci děložních adnex diagnostické zobrazování patofyziologie MeSH
- prospektivní studie MeSH
- ROC křivka MeSH
- senzitivita a specificita MeSH
- ultrasonografie dopplerovská MeSH
- zobrazování trojrozměrné MeSH
- Check Tag
- lidé středního věku MeSH
- lidé MeSH
- ženské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
- multicentrická studie MeSH
- pozorovací studie MeSH
- práce podpořená grantem MeSH
- Geografické názvy
- Evropa MeSH
Insulin production in pancreatic beta-cells is critically linked to mitochondrial oxidative phosphorylation. Increased ATP production triggered by blood glucose represents the beta-cells' glucose sensor. Type-2 diabetes mellitus results from insulin resistance in peripheral tissues and impaired insulin secretion. Pathology of diabetic beta-cells might be reflected by the altered morphology of mitochondrial network. Its characterization is however hampered by the complexity and density of the three-dimensional (3D) mitochondrial tubular networks in these cell types. Conventional confocal microscopy does not provide sufficient axial resolution to reveal the required details; electron tomography reconstruction of these dense networks is still difficult and time consuming. However, mitochondrial network morphology in fixed cells can also be studied by 4Pi microscopy, a laser scanning microscopy technique which provides an approximately 7-fold improved axial resolution (approximately 100 nm) over conventional confocal microscopy. Here we present a quantitative study of these networks in insulinoma INS-1E cells and primary beta-cells in Langerhans islets. The former were a stably-transfected cell line while the latter were transfected with lentivirus, both expressing mitochondrial matrix targeted redox-sensitive GFP. The mitochondrial networks and their partial disintegration and fragmentation are revealed by carefully created iso-surface plots and their quantitative analysis. We demonstrate that beta-cells within the Langerhans islets from diabetic Goto Kakizaki rats exhibited a more disintegrated mitochondrial network compared to those from control Wistar rats and model insulinoma INS-1E cells. Standardization of these patterns may lead to development of morphological diagnostics for Langerhans islets, for the assessment of beta-cell condition, before their transplantations. Copyright 2010 Elsevier B.V. All rights reserved.
- MeSH
- beta-buňky * patologie ultrastruktura MeSH
- diabetes mellitus 2. typu * patologie MeSH
- inzulinom patologie MeSH
- konfokální mikroskopie * metody MeSH
- krysa rodu rattus MeSH
- mitochondrie * patologie ultrastruktura MeSH
- modely nemocí na zvířatech MeSH
- nádorové buněčné linie MeSH
- nádory slinivky břišní patologie MeSH
- potkani Wistar MeSH
- rekombinantní fúzní proteiny genetika MeSH
- techniky in vitro MeSH
- transfekce MeSH
- zelené fluorescenční proteiny genetika MeSH
- zobrazování trojrozměrné MeSH
- zvířata MeSH
- Check Tag
- krysa rodu rattus MeSH
- zvířata MeSH
- Publikační typ
- práce podpořená grantem MeSH
- Research Support, U.S. Gov't, Non-P.H.S. MeSH
AIM: This paper describes the digital implementation of a mathematical transform namely 2D Fast Discrete Curvelet Transform (FDCT) via UnequiSpaced Fast Fourier Transform (USFFT) in combination with the novel segmentation method for effective detection of breast cancer. METHODS: USFFT performs exact reconstructions with high image clarity. Radon, ridgelet and Cartesian filters are included in this method. Mean Square Error (MSE) and Peak Signal to Noise Ratio (PSNR) were calculated for the image and the resulting value showed that the proposed method performs well on mammogram image in reducing noise with good extraction of edges. This work includes a novel segmentation method, which combines Modified Local Range Modification (MLRM) and Laplacian of Gaussian (LoG) edge detection method to segment the textured features in the mammogram image. RESULTS: The result was analyzed using a Receiver Operating Characteristics (ROC) plot and the detection accuracy found was 99% which is good compared to existing methods.
PURPOSE OF THE STUDY The aim of this prospective randomised study was to compare and statistically analyse two methods of condylar twist angle (CTA) measurement in total knee arthroplasty in order to assess their applicability in routine practice. MATERIAL AND METHODS The study included 238 patients with 256 sites undergoing total knee arthroplasty (TKA) in the period from January 2009 to May 2011. There were 93 men (nine with bilateral TKA) and 145 women (nine with bilateral TKA) with an average age of 69.3 years and a range of 47 to 88 years. The implants NexGen (Zimmer) and ADVANCE? Medial-Pivot Knee (Wright) were used. In each patient, CTA was measured before surgery by the radiologist on a multidetector CT SOMATOM 64 (Siemens) using the Yoshioki method. The other CTA measurement was made intra-operatively by the surgeon using our modification of the Hofmann method which involved the identification of a reference line for optimal rotational alignment of the femoral component. A STATISTICA 9.0 software package was used for statistical analysis. In addition to basic statistical data, selected data were presented in graphical forms as Box and Whisker's plots and histograms. Changes in CTA and differences between the groups were evaluated using the Wilcoxon signed-rank test. Relationships among the variables were studied using Spearman's correlation coefficient. RESULTS The statistical analysis showed that the pre-operative CTA value obtained from CT scans was, on the average, higher by 0.5 degrees than the value from intra-operative measurement, as assessed at the level of significance p = 0.001 (signed-rank test). The intra-individual variability was lower than the inter-individual one (14.4% and 30.8%, respectively). This means that both methods are suitable for CTA measurement in the knee joint replacement procedures. Spearman's correlation coefficient was 0.6, which is the value of medium strong correlation. The post-operative CTA assessed on CT scans was in the range of 0 to 2 degrees in 87.5% of the patients. Both the pre-operative and intra-operative CTA values were significantly higher in women than in men (Wilcoxon two-sample test). There was no statistical difference between the left and the right side. DISCUSSION Malrotation of the femoral component is one of the causes leading to patellar subluxation and pain in the front part of the knee. The post-operative CTA value should be zero. Optimal rotational alignment of the femoral component varies with each patient; in our study it was found in the range of 0 to 7 degrees on the basis of CTA values. We do not recommend 7 degrees of external rotation to be exceeded because of the risk associated with balancing the flexion gaps; nor do we recommend to set internal rotation of the femoral component for the risk of patellar complications. The difference of 0.5 degree found in the CTA value between the two measuring methods can be explained by individual differences in the anatomy of the medial epicondylar region, and by the use of only selected whole numbers (0, 3, 5, 7) in intra-operative measurements. This difference does not play any role in routine surgical procedures. CONCLUSIONS The statistical evaluation of the results of CTA measurement with the two methods showed that both were equally suitable for routine total knee arthroplasty. The results of intra-operative CTA measurements are comparable with those obtained on CT scans; in addition, the intra-operative method is less expensive and eliminates exposure of the patient to radiation. CT-based CTA measurements are useful in the patients with chronic problems afterTKA in whom femoral component malrotation needs to be either confirmed or ruled out.
- Klíčová slova
- CTA, condylar twist angle, Advance Medial - Pivot Knee, NexGen,
- MeSH
- chirurgie operační metody využití MeSH
- financování organizované MeSH
- interpretace statistických dat MeSH
- kolenní kloub chirurgie patofyziologie MeSH
- lidé středního věku MeSH
- lidé MeSH
- peroperační péče statistika a číselné údaje využití MeSH
- počítačová rentgenová tomografie statistika a číselné údaje MeSH
- prospektivní studie MeSH
- protézy a implantáty využití MeSH
- protézy kolene statistika a číselné údaje využití MeSH
- reprodukovatelnost výsledků MeSH
- rotace škodlivé účinky MeSH
- rozsah kloubních pohybů MeSH
- senioři nad 80 let MeSH
- senioři MeSH
- výsledek terapie MeSH
- výsledky a postupy - zhodnocení (zdravotní péče) statistika a číselné údaje MeSH
- zobrazování trojrozměrné MeSH
- Check Tag
- lidé středního věku MeSH
- lidé MeSH
- mužské pohlaví MeSH
- senioři nad 80 let MeSH
- senioři MeSH
- ženské pohlaví MeSH
- Publikační typ
- randomizované kontrolované studie MeSH
- srovnávací studie MeSH
The enantiomeric pairs of cis and trans stereoisomers of cyclic β-aminohydroxamic acids and their related cis and trans cyclic β-amino acids containing two chiral centers were directly separated on four structurally related chiral stationary phases derived from quinine and quinidine modified with (R,R)- and (S,S)-aminocyclohexanesulfonic acids. Applying these zwitterionic ion-exchangers as chiral selectors, the effects of the composition of the bulk solvent, the acid and base additives, the structures of the analytes, and temperature on the enantioresolution were investigated. To study the effects of temperature and obtain thermodynamic parameters, experiments were carried out at constant mobile phase compositions in the temperature range 5-50°C. The differences in the changes in standard enthalpy Δ(ΔH°), entropy Δ(ΔS°), and free energy Δ(ΔG°) were calculated from the linear van't Hoff plots derived from the ln α versus 1/T curves in the studied temperature range. Results thus obtained indicated enthalpy-driven separations in all cases. The sequence of elution of the enantiomers was determined and found to be reversed when ZWIX(-)™ was changed to ZWIX(+)™ or ZWIX(-A) to ZWIX(+A).
Nucleus, chromatin, and chromosome organization studies heavily rely on fluorescence microscopy imaging to elucidate the distribution and abundance of structural and regulatory components. Three-dimensional (3D) image stacks are a source of quantitative data on signal intensity level and distribution and on the type and shape of distribution patterns in space. Their analysis can lead to novel insights that are otherwise missed in qualitative-only analyses. Quantitative image analysis requires specific software and workflows for image rendering, processing, segmentation, setting measurement points and reference frames and exporting target data before further numerical processing and plotting. These tasks often call for the development of customized computational scripts and require an expertise that is not broadly available to the community of experimental biologists. Yet, the increasing accessibility of high- and super-resolution imaging methods fuels the demand for user-friendly image analysis workflows. Here, we provide a compendium of strategies developed by participants of a training school from the COST action INDEPTH to analyze the spatial distribution of nuclear and chromosomal signals from 3D image stacks, acquired by diffraction-limited confocal microscopy and super-resolution microscopy methods (SIM and STED). While the examples make use of one specific commercial software package, the workflows can easily be adapted to concurrent commercial and open-source software. The aim is to encourage biologists lacking custom-script-based expertise to venture into quantitative image analysis and to better exploit the discovery potential of their images.Abbreviations: 3D FISH: three-dimensional fluorescence in situ hybridization; 3D: three-dimensional; ASY1: ASYNAPTIC 1; CC: chromocenters; CO: Crossover; DAPI: 4',6-diamidino-2-phenylindole; DMC1: DNA MEIOTIC RECOMBINASE 1; DSB: Double-Strand Break; FISH: fluorescence in situ hybridization; GFP: GREEN FLUORESCENT PROTEIN; HEI10: HUMAN ENHANCER OF INVASION 10; NCO: Non-Crossover; NE: Nuclear Envelope; Oligo-FISH: oligonucleotide fluorescence in situ hybridization; RNPII: RNA Polymerase II; SC: Synaptonemal Complex; SIM: structured illumination microscopy; ZMM (ZIP: MSH4: MSH5 and MER3 proteins); ZYP1: ZIPPER-LIKE PROTEIN 1.
